Ashly XR-2001 - Manual - manualsarea.com

Page 2 - Operator Manual – XR Series Crossovers; This page intentionally left blank

Page 3 - Operator Manual –XR Series Crossovers; Important Safety Instructions

Operator Manual –XR Series Crossovers Page - 3 All Rights Reserved Important Safety Instructions Consignes de sécurité à lire attentivement 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. To reduce the risk of fire or electric shock, do no...

Page 4 - Introduction; About Ashly

Page - 4 Operator Manual – XR Series Crossovers Copyright© 2006 – Ashly Audio Inc. Introduction Congratulations on your purchase of an Ashly XR Crossover. This crossover is the productof an intensive research effort which combined a reexamination of traditional crossovertheory with practical field u...

Page 5 - XR Crossovers; XR Connector Polarities; Unbalanced Connections and Grounding; Inputs are 20K; Outputs; The outputs are low impedance (200

Operator Manual –XR Series Crossovers Page - 5 All Rights Reserved XR Crossovers Ashly crossovers are based upon a powerful state-variable filter circuit, which guaranteesthat two adjacent frequency band outputs always remain in phase. These crossovers offer anumber of useful and unusual features, i...

Page 6 - Physical Description

Page - 6 Operator Manual – XR Series Crossovers Copyright© 2006 – Ashly Audio Inc. Physical Description The XR-1001 is 1RU, and weighs 8 pounds. The XR-2001 & XR-4001 are 2RU, and weigh 11 pounds. XR-1001 & XR-4001 Front Panels 1. Power - There is a dedicated power LED on the front; the powe...

Page 7 - Installation; General Requirements

Operator Manual –XR Series Crossovers Page - 7 All Rights Reserved XR-1001, XR-2001 and XR-4001 Rear Panels 1. Inputs - For unbalanced inputs, the signal should be on the + connection and the -connection tied to ground. A mono 1/4” plugused as an unbalanced connection willautomatically be grounded. ...

Page 8 - Typical Applications; Connecting to a Sound System

Page - 8 Operator Manual – XR Series Crossovers Copyright© 2006 – Ashly Audio Inc. Typical Applications The following information will help you make the most of your new crossover: Connecting to a Sound System Usually, the output signal from a final processing source such as a limiter or equalizer i...

Page 9 - XR 2001 Mono 4-Way or Mono 5-Way Operation

Operator Manual –XR Series Crossovers Page - 9 All Rights Reserved XR 2001 Mono 4-Way or Mono 5-Way Operation XR2001 The XR 2001 functions as a four channel 2-way, stereo 3-way, mono 4-way, or mono 5-way. For mono 4-way or mono 5-way operation, cascade a low output (set up as a mid in a4-way or 5-wa...

Page 10 - Troubleshooting; Situation; Dimensions

Page - 10 Operator Manual – XR Series Crossovers Copyright© 2006 – Ashly Audio Inc. Troubleshooting Situation Action No Output Check AC power - is LED indicator on? Check in/out connections, are they reversed? Areyou sure you have input signal? Peak light flashesfrequently The level is too high some...

Page 11 - Specifications

Operator Manual –XR Series Crossovers Page - 11 All Rights Reserved Specifications Specification XR 1001 XR 2001 XR 4001 Input Level Control - to +8.5 dB - to +8.5 dB - to +8.5 dB Damping/Response 2dB – 12dB 2dB – 12dB 2dB – 12dB Output Level Control - to +15 dB - to +15 dB - to +15 dB Input Impedan...

Page 12 - Limited Warranty; Ship your product to:

Page - 12 Operator Manual – XR Series Crossovers Copyright© 2006 – Ashly Audio Inc. Limited Warranty Warranty service for this unit will be provided by ASHLY AUDIO INC. in accordance withthe following warrant statement. ASHLY AUDIO INC. warrants to the owner of this product that this product and the...

Ashly XR-2001 - Manual

Table of Contents:

Summary

Other Ashly Models