Ashly SRA-Series - Manuals - manualsarea.com

Page 2 - Operator Manual – SRA Series Amplifiers

Page - 2 Operator Manual – SRA Series Amplifiers Copyright© 2006 – Ashly Audio Inc. Important Safety InstructionsConsignes de sécurité à lire attentivement This power amplifier can produce dangerousoutput voltage, power and sound pressurelevels. In order to minimize the risk of injury,damage, or hea...

Page 3 - Introduction; About Ashly; This device may not cause harmful interference

Operator Manual – SRA Series Amplifiers Page - 3 All Rights Reserved Rev 1.4 0306 Introduction Congratulations on your purchase of an Ashly SRA-Series amplifier. The SRA-Series ismade up of powerful, high-efficiency, lightweight amplifiers incorporating the latesttechnologies. We are confident that ...

Page 4 - The SRA Series; Protection; DC output protection -

Page - 4 Operator Manual – SRA Series Amplifiers Copyright© 2006 – Ashly Audio Inc. The SRA Series SRA-Series amplifiers are high-efficiency, lightweight amplifiers incorporating the latestamplifier technologies. The series provides a power range of 75 to 150 watts per channel at 4 ohms (20Hz-20kHz,...

Page 5 - Physical Description; Amplifier Front Panel

Operator Manual – SRA Series Amplifiers Page - 5 All Rights Reserved Rev 1.4 0306 Physical Description Each model in the SRA-Series is 1RU, and weighs 9 pounds (2 Ch) or 10 pounds (4 Ch).They have the same physical design, though there are obvious differences between two andfour channel versions. Th...

Page 6 - Installation; When mounting or connecting the amplifier, always disconnect it; Requirements

Page - 6 Operator Manual – SRA Series Amplifiers Copyright© 2006 – Ashly Audio Inc. Installation SRA-Series amplifiers are designed for use in both fixed and mobile sound systems. Eachamplifier is shipped (unless otherwise specified) with the following factory settings: Front panel: Rear panel: On/O...

Page 7 - Typical Applications

Operator Manual – SRA Series Amplifiers Page - 7 All Rights Reserved Rev 1.4 0306 Typical Applications The most common use of a SRA-Series amplifier is a 2-channel source driving 2 speakerchannels. In this illustration, the 4-channel amplifier is receiving two stereo signals and isdriving two pairs ...

Page 8 - Operation; NOTE

Page - 8 Operator Manual – SRA Series Amplifiers Copyright© 2006 – Ashly Audio Inc. Operation The amplifier’s On/Off Switch is a rocker-type switch located on the left side of the frontpanel. Turning on the amplifier initiates start-up by activating the inrush current limiter. When using the remote ...

Page 9 - Troubleshooting; Situation

Operator Manual – SRA Series Amplifiers Page - 9 All Rights Reserved Rev 1.4 0306 Troubleshooting Situation Indication Action Signal LED not litClip LEDs not lit Check AC plug. Confirm that AC outlet works by pluggingin another device. Signal LED not lit Make sure the signal source is operating and ...

Page 10 - Spec Table

Page - 10 Operator Manual – SRA Series Amplifiers Copyright© 2006 – Ashly Audio Inc. Spec Table SRA-2075 SRA-4075 SRA-2150 SRA-4150 Power Output Per ChannelStereo Mode, all channels driven 8 ohms, 20 Hz - 20 kHz, 1% THD 2 x 40W 4 x 40W 2 x 80W 4 x 80W 4 ohms, 20 Hz - 20 kHz, 1% THD 2 x 75 W 4 x 75 W...

Page 11 - Amplifier Dimensions

Operator Manual – SRA Series Amplifiers Page - 11 All Rights Reserved Rev 1.4 0306 Amplifier Dimensions All SRA Series amplifiers share the same dimensional measurements: Remote Power Connections Important Safety Instructions – 2 Introduction - 3 The SRA Series - 4 Physical Description - 5 Installat...

Page 12 - Limited Warranty; OBTAINING WARRANTY SERVICE:

Page - 12 Operator Manual – SRA Series Amplifiers Copyright© 2006 – Ashly Audio Inc. Limited Warranty Warranty service for this unit will be provided by ASHLY AUDIO, INC. in accordance withthe following warranty statement. ASHLY AUDIO, INC. warrants to the owner of this product that this product and...