ASA AVT-1928 - Manuals

13. An outside antenna system should not be located in the vicinity of overhead powerlines or other electric light or powercircuits, where it can fall into such powerlines or circuits. When installing anoutside antenna system. Extreme careshould be taken to keep from touchingsuch power lines or circ...

Overview of your Equipment Your TV comes with a remote control. The section below summarizes the buttons, controls and terminals that you will use with your TV. Your TV’s Front Panel 1. POWER Use this button to turn your TV on or off. 2. ù ù CH üü Use these buttons to change channels on your TV, or ...

Your Remote Control 1. POWER Use this button to turn your TV on or off. 2. CH Use these buttons to change channelson your TV, or select items in the menusystem. 3. V O L Use these buttons to change your TV’svolume, to activate selections in themenu system, or to change audio andvideo settings. 4. ME...

Connecting an Antenna or cable to Your TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below to make this connection. Please note that you willnormally only have to make one of the connections shown below, not all ...

Chapter 2: Connecting to an Antenna or Cable to your TV- 7 Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna forVHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300 ohm lea...

If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal onthe converter box and the antenna terminal on the TV. If your cable system only requires you to use a conver...

Operating Your TV Once you have connected your TV to an antenna or cable system, unplugged the TV in, andput batteries in the remote, you are ready to use the TV. The first thing you should do isprogram your TV so it memorizes all of the available channels. Turning Your TV On Programming Your TV’s C...

Erasing a channel from memory Changing the TV’s channel memory with the menus You can also use the menu system to add/erase channels from memory:1. Use the number buttons to tune to the channel, then press MENU.2. Use the CH buttons to select SETUP and press VOL .3. Use the CH buttons to select EDIT...

Adjusting Video Settings You may wish to adjust the video settings (e.g. contrast or color) to obtain the most pleasingpicture. To do so follow these directions:1. With the TV on, press the MENU button.2. Use the CH buttons to select PICTURE.3. Press the VOL button. The picture menu will appear.4. T...

Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory,follow these steps: 1. Complete steps 1-3 in the “Adjusting Video Settings” section, on the previous page.2. Press the VOL button to set the AUTO setting to ON. This w...

Using Timer Functions Your TV has a built in clock, and you can set the TV to turn on and off at times that you select.You can also set your TV to turn off after counting down a certain amount of time. Accessing the Timer Menu 1. With the TV turned on, press the MENU button.2. Use the CH buttons to ...

Setting the On Timer If you enter a time in the ON TIME setting, your TV will automatically turn on at that time.Follow these instructions to set the ON TIME:1. Follow steps 1-3 in ”Accessing the Timer Menu” on the previous page.2. Use the CH buttons to select ON TIME.3. Press the VOL button to set ...

3. Press the VOL button to set the hours (including AM/PM); press the VOL button to set the minutes. If you hold down either VOL button, the corresponding numbers will changemore quickly. 4. When the setting is correct, use the CH buttons to select another timer function, or use the MENU button to e...

Additional Features This section contains descriptions of the advanced features of your TV. Changing the Language of the On Screen Menus You can choose to display the on screen menus in English, Spanish, or French. To changethe on screen language:1. With the Tv turned on, press the MENU button.2. Us...

5. Wait 5 seconds, or press the MENU button twice to return to normal TV viewing. Your setting will remain intact until you change it. About captions Once you have chosen a caption setting, all available captions on that setting will be displayedwhen you watch TV. If no captions appear, it is becaus...

90 DAY/12 MONTH LIMITED WARRANTY APPLIES TO AUDIOVOX VIDEO PRODUCT Audiovox Specialized Applications, LLC (the company) warrants to the original retail purchaser of thisproduct that should this product or any part thereof, under normal use and conditions, be provendefective in material or workmanshi...

Audiovox Specialized Applications, LLC 23319 Cooper Dr. Elkhart, IN 46514 This instrument is listed by Underwriter’sLabortories, Inc. It is designed andmanufactured to meet rigid U.L. safetystandards against X-radiation, fire, casualty andelectrical hazards. L U