ASA AOM703 - Manual
ASA AOM703 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important! – Please Read This Manual Before Installing!; proceed cautiously and be prepared to stop.
- Page 4 – CONTROLS AND OPERATION
- Page 6 – INSTALLATION INSTRUCTIONS; BEFORE YOU BEGIN INSTALLATION:
- Page 7 – sharp edges. Secure cables with wire ties.
- Page 9 – REAR OBSERVATION INSTALLATION; DISTANCE MARKER USE/INSTALLATION; - PLACE RANGE MARKER DECALS ON SCREEN
- Page 10 – mm; mm
- Page 12 – TROUBLESHOOTING
- Page 13 – PRODUCT SPECIFICATIONS
AOM703
7” FLAT PANEL COLOR OBSERVATION
MONITOR OWNER'S MANUAL
AOM703 Features:
–
7” High Performance Color LCD Monitor
–
Water Resistant Design
–
Built-in Audio Speaker with Volume Control
and 12V Trigger
–
3 Camera (A/V) Input with Source Select Control
–
Backlit Controls and Day/Night Picture Modes
for Nighttime Use
–
Auto/Manual Power On
–
Sun Visor Included
UDIOVOX
PPLICATIONS, L.L.C.
PECIALIZED
Visit us at http://www.asaelectronics.com
Patent Pending
S
S
–
+
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Important! – Please Read This Manual Before Installing! Congratulations on your purchase of a Voyager AOM703 LCD Observation Monitor. With proper installation and use, your AOM703 is designed to provide you with years of trouble-free operation. This manual contains important information required t...
1. Power/Stand-By mode: The Power / Stand-By button has two possible operation modes. a. Manual mode - Turned on manually by the user by pressing the Power button.b. Stand-By mode -Turned on by a stand-by trigger wire generally connected to the vehicles 12V reverse back up lights or turn signals. Ma...
INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLATION: Before drilling, be sure that no cable or wiring is on the other side. Clamp all wires securely to reduce the possibility of them being damaged during installation and use. Keep all cables away from hot or moving parts, and electrically noisy ...
