ASA AVT-1928 - Manual - manualsarea.com

Page 2 - CAUTION; RISK OF ELECTRIC SHOCK

WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN ORMOISTURE. CAUTION CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURERCOULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE TO CATV SYSTEM INSTALLER THIS REMINDER IS PROVIDED TO CALL THE CATV SYST...

Page 3 - Table of Contents; Chapter 2: Connecting an Antenna or Cable to your TV.........................7

Table of Contents Important Safeguards……………………………………………………………..2Chapter1: Overview of Your equipment………………………………………..4 Your TV’s Front Panel……………………………………………………….4Your TV’s Back Panel……………………………………………………….4Your Remote Control………………………………………………………...5 Installing your remote control batteries………………………...

Page 4 - IMPORTANT SAFEGUARDS; - Important Safeguards

IMPORTANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT ANDRETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ONTHE TV RECEIVER. 1. Read all of these instructions.2. Save these instructions for later use.3. Unplug this television equipment fr...

Page 5 - Important Safeguards-3

13. An outside antenna system should not be located in the vicinity of overhead powerlines or other electric light or powercircuits, where it can fall into such powerlines or circuits. When installing anoutside antenna system. Extreme careshould be taken to keep from touchingsuch power lines or circ...

Page 6 - Overview of your Equipment; buttons, controls and terminals that you will use with your TV.; Your TV’s Front Panel; Use this button to turn your TV on or off.; CH; üü; VOL; Use this button to turn the TV’s menu system on and off.; Remote control receiver

Overview of your Equipment Your TV comes with a remote control. The section below summarizes the buttons, controls and terminals that you will use with your TV. Your TV’s Front Panel 1. POWER Use this button to turn your TV on or off. 2. ù ù CH üü Use these buttons to change channels on your TV, or ...

Page 7 - Your Remote Control

Your Remote Control 1. POWER Use this button to turn your TV on or off. 2. CH Use these buttons to change channelson your TV, or select items in the menusystem. 3. V O L Use these buttons to change your TV’svolume, to activate selections in themenu system, or to change audio andvideo settings. 4. ME...

Page 9 - Connecting an Antenna or cable to Your TV; Connecting an Antenna

Connecting an Antenna or cable to Your TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below to make this connection. Please note that you willnormally only have to make one of the connections shown below, not all ...

Page 10 - you must obtain a; If your antenna system has two sets of twin 300 ohm leads,; you must obtain a combiner; Connecting a cable system; - Chapter 2: Connecting an Antenna or Cable to Your TV; simply press or screw the incoming

Chapter 2: Connecting to an Antenna or Cable to your TV- 7 Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna forVHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300 ohm lea...

Page 11 - connect the incoming; Connecting Other Pieces of Equipment; Chapter 2: Connecting an Antenna or Cable to your TV-9

If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal onthe converter box and the antenna terminal on the TV. If your cable system only requires you to use a conver...

Page 12 - the AUTO PROGRAM process. This process takes a few minutes.

Operating Your TV Once you have connected your TV to an antenna or cable system, unplugged the TV in, andput batteries in the remote, you are ready to use the TV. The first thing you should do isprogram your TV so it memorizes all of the available channels. Turning Your TV On Programming Your TV’s C...

Page 14 - Displaying the Current Channel; To quickly see the current channel, press

Erasing a channel from memory Changing the TV’s channel memory with the menus You can also use the menu system to add/erase channels from memory:1. Use the number buttons to tune to the channel, then press MENU.2. Use the CH buttons to select SETUP and press VOL .3. Use the CH buttons to select EDIT...

Page 15 - Adjusting Video Settings; allow you to manually adjust the video settings.

Adjusting Video Settings You may wish to adjust the video settings (e.g. contrast or color) to obtain the most pleasingpicture. To do so follow these directions:1. With the TV on, press the MENU button.2. Use the CH buttons to select PICTURE.3. Press the VOL button. The picture menu will appear.4. T...

Page 16 - Returning to the factory settings; button on the remote control.; Descriptions of video settings

Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory,follow these steps: 1. Complete steps 1-3 in the “Adjusting Video Settings” section, on the previous page.2. Press the VOL button to set the AUTO setting to ON. This w...

Page 17 - Using Timer Functions; Accessing the Timer Menu; the MENU button to exit this menu.

Using Timer Functions Your TV has a built in clock, and you can set the TV to turn on and off at times that you select.You can also set your TV to turn off after counting down a certain amount of time. Accessing the Timer Menu 1. With the TV turned on, press the MENU button.2. Use the CH buttons to ...

Page 18 - Setting the On Timer; Setting the Off Timer

Setting the On Timer If you enter a time in the ON TIME setting, your TV will automatically turn on at that time.Follow these instructions to set the ON TIME:1. Follow steps 1-3 in ”Accessing the Timer Menu” on the previous page.2. Use the CH buttons to select ON TIME.3. Press the VOL button to set ...

Page 19 - Canceling the On Timer or Off Timer

3. Press the VOL button to set the hours (including AM/PM); press the VOL button to set the minutes. If you hold down either VOL button, the corresponding numbers will changemore quickly. 4. When the setting is correct, use the CH buttons to select another timer function, or use the MENU button to e...

Page 20 - Additional Features; Changing the Language of the On Screen Menus; Press the MENU button to return to normal TV viewing.; Captioning

Additional Features This section contains descriptions of the advanced features of your TV. Changing the Language of the On Screen Menus You can choose to display the on screen menus in English, Spanish, or French. To changethe on screen language:1. With the Tv turned on, press the MENU button.2. Us...

Page 21 - setting will remain intact until you change it.; About captions; You can also change the caption setting with

5. Wait 5 seconds, or press the MENU button twice to return to normal TV viewing. Your setting will remain intact until you change it. About captions Once you have chosen a caption setting, all available captions on that setting will be displayedwhen you watch TV. If no captions appear, it is becaus...

Page 24 - WARRANTY; APPLIES TO AUDIOVOX VIDEO PRODUCT

90 DAY/12 MONTH LIMITED WARRANTY APPLIES TO AUDIOVOX VIDEO PRODUCT Audiovox Specialized Applications, LLC (the company) warrants to the original retail purchaser of thisproduct that should this product or any part thereof, under normal use and conditions, be provendefective in material or workmanshi...

Page 26 - Audiovox Specialized Applications, LLC

Audiovox Specialized Applications, LLC 23319 Cooper Dr. Elkhart, IN 46514 This instrument is listed by Underwriter’sLabortories, Inc. It is designed andmanufactured to meet rigid U.L. safetystandards against X-radiation, fire, casualty andelectrical hazards. L U

ASA AVT-1928 - Manual

Table of Contents:

Summary

Other ASA Models