ASA AOM701 - Manuals - manualsarea.com

Page 2 - Important! – Please Read This Manual Before Installing!; proceed cautiously and be prepared to stop.

2 Important! – Please Read This Manual Before Installing! Congratulations on your purchase of a Voyager AOM701 LCD Observation Monitor. With proper installation and use, your AOM701 is designed to provide you with years of trouble-free operation. This manual contains important information required t...

Page 4 - CONTROLS AND OPERATION

1. Power/Stand-By Button The Power / Stand-by Button has two possible operations modes. a. Manual mode - Turned on manual by the user by pressing the Power #1 button. b. Stand-by mode - Turned on by a stand by trigger wire generally connected to the vehicles 12V reverse backup lights. Manual Mode wi...

Page 5 - Picture Adjustment Menu Button

2. A/B Input Select Button This control toggles the active display image back and forth between AV1 and AV2 inputs. AV1 is the default source for the Blue Standby trigger wire. 3. Day/Night Mode Button This control toggles the unit between “Day” and “Night” LCD illumination modes. In the “Day” mode,...

Page 6 - INSTALLATION INSTRUCTIONS; BEFORE YOU BEGIN INSTALLATION:

INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLATION: Before drilling, be sure that no cable or wiring is on the other side. Clamp all wires securely to reduce the possibility of them being damaged during installation and use. Keep all cables away from hot or moving parts, and electrically noisy ...

Page 7 - sharp edges. Secure cables with wire ties.

5. There are 2 options for connecting the LCD monitor to the connection cable. If the application is such that the monitor is in close proximity to the connection cable, the AOM701 monitor can be connected directly to the connection cable. If the connection cable is mounted further from the monitor,...

Page 9 - REAR OBSERVATION INSTALLATION; DISTANCE MARKER USE/INSTALLATION; - PLACE RANGE MARKER DECALS ON SCREEN; WIDTH OF VEHICLE

9 REAR OBSERVATION INSTALLATION DISTANCE MARKER USE/INSTALLATION - PLACE INDICATOR MARKERS (CONE, BOX ANY REFERENCE OBJECT HANDY) BEHIND VEHICLE AS IN FIGURE A. - PLACE RANGE MARKER DECALS ON SCREEN OF MONITOR OVER IMAGE OF INDICATOR MARKERS ON GROUND BEHIND VEHICLE, AS VIEWED ON THE MONITOR SCREEN....

Page 11 - TROUBLESHOOTING; SYMPTOM

11 TROUBLESHOOTING No power No +12V accessory, No ground, mis-wired/reversed Replace circuit fuse, monitor has protection device built-in/reset, check ground connection, verify power is being supplied SYMPTOM CAUSE SOLUTION Video/No audio White audio trigger wire not powered, Volume adjust down Conn...

Page 12 - PRODUCT SPECIFICATIONS

12 PRODUCT SPECIFICATIONS LCD panel specifications: Size/Type Contrast Ratio View Angles(@ CR ³ 10) Back light Type Back light Life 7” (diagonal) /TFT LCD Brightness 350 nit (min)420 nit (typ.) Response Time 200 (min)300 (typ.) Top (12 o’clock): 30 ° (min) Bottom (6 o’clock): 50 ° (min) Horizontal: ...