ASA AOM701 - Manual
ASA AOM701 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important! – Please Read This Manual Before Installing!; proceed cautiously and be prepared to stop.
- Page 4 – CONTROLS AND OPERATION
- Page 5 – Picture Adjustment Menu Button
- Page 6 – INSTALLATION INSTRUCTIONS; BEFORE YOU BEGIN INSTALLATION:
- Page 7 – sharp edges. Secure cables with wire ties.
- Page 9 – REAR OBSERVATION INSTALLATION; DISTANCE MARKER USE/INSTALLATION; - PLACE RANGE MARKER DECALS ON SCREEN; WIDTH OF VEHICLE
- Page 11 – TROUBLESHOOTING; SYMPTOM
- Page 12 – PRODUCT SPECIFICATIONS
AOM701
7” FLAT PANEL COLOR OBSERVATION
MONITOR OWNER'S MANUAL
AOM701 Features:
–
7” High Performance Color LCD Monitor
–
Built-in Audio Speaker with Volume Control
and 12V Trigger
– 2
Camera (A/V) Input with A/B Select Control
–
Backlit Controls and Day/Night Picture Modes
for Nighttime Use
–
Auto/Manual Power On
–
Sun Visor Included
A
B
–
+
UDIOVOX
PPLICATIONS, L.L.C.
PECIALIZED
®
10R-020499
Visit us at http://www.asaelectronics.com
Patent Pending
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Important! – Please Read This Manual Before Installing! Congratulations on your purchase of a Voyager AOM701 LCD Observation Monitor. With proper installation and use, your AOM701 is designed to provide you with years of trouble-free operation. This manual contains important information required t...
1. Power/Stand-By Button The Power / Stand-by Button has two possible operations modes. a. Manual mode - Turned on manual by the user by pressing the Power #1 button. b. Stand-by mode - Turned on by a stand by trigger wire generally connected to the vehicles 12V reverse backup lights. Manual Mode wi...
2. A/B Input Select Button This control toggles the active display image back and forth between AV1 and AV2 inputs. AV1 is the default source for the Blue Standby trigger wire. 3. Day/Night Mode Button This control toggles the unit between “Day” and “Night” LCD illumination modes. In the “Day” mode,...
