Artusi AWC18X - Manuals - manualsarea.com

Page 3 - IMPORTANT SAFETY INSTRUCTIONS; When disconnecting the appliance, pull on the plug, not on the cable.

3 1. IMPORTANT SAFETY INSTRUCTIONS WARNING Before the appliance is used, it must be properly positioned and installed as described in this manual. So read the manual carefully. To reduce the risk of fire, electric shock or injury when using the appliance, foll...

Page 5 - INSTALLATION INSTRUCTIONS; OPERATING YOUR APPLIANCE

5 2. INSTALLATION INSTRUCTIONS ATTENTION If the appliance is transported in a horizontal position, the oil from the compressor may leak into the cooling circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours bef...

Page 7 - TEMPERATURE SETTINGS

7 display will turn off, and the ° C/ ° F light will be on. • “ “ indicator light: shows that the compressor is in operation. • “ ” button: It is used to increase (warm) the temperature in steps of 1 ° F (or 1 ° C). • “ ” button: It is used...

Page 8 - FUNCTIONS

8 FUNCTIONS TEMPERATURE MEMORY FUNCTION If the power is suddenly lost, the set temperature will be saved by the unit. Once the power is back on, the unit will be at the same set temperature. “CLOSE DOOR” REMINDER FUNCTION When you forget to close the door o...

Page 9 - SELECTOR BUTTONS

9 This wine cooler has a temperature range from 5°C to 18°C. The upper zone has a temperature range of 5°C to 12°C, the lower zone has a temperature range of 12°C to 18°C SELECTOR BUTTONS POWER BUTTON: Press and hold down for thre...

Page 12 - CARE AND MAINTENANCE; MOVING YOUR WINE CELLAR

12 4. CARE AND MAINTENANCE CLEANING YOUR WINE CELLAR • Turn off the power, unplug the appliance, and remove all items including shelves and rack. • Wash the inside surfaces with warm water and baking soda solution. The solution should be ...

Page 13 - Troubleshooting guide; Problem; Appliance does not operate.

13 1. Troubleshooting guide You can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. Problem Possible...