Page 3 - CONTENTS
3 Rev.13052022 CONTENTS Warnings and Pre installation check 4 Pre Install checklist 7 Installation preparation 8 Installing your appliance into the cabinetry 9 Attaching the door panel 10 Mounting the door panel to the appliance 11 Before first use 13 General fridge/freezer use 14 Storage 15 Control...
Page 4 - WARNINGS AND PRE INSTALLATION CHECK
4 Rev.13052022 WARNINGS AND PRE INSTALLATION CHECK Please read the user instructions carefully before using the appliance for the first time and before installing it. Failure to install the appliance, or to have it installed, as per the user manual could invalidate the warranty. Any service calls re...
Page 6 - airflow; EXPLODED VIEW OF REFRIGERATOR & CABINETRY
6 Rev.13052022 540 57 988 640 57 28 540 1770 560 min 560-570 1780 min.30 300 min. 30 300 560-570 airflow * Supplied power cord is located from the bottom rear right and is 150cm long EXPLODED VIEW OF REFRIGERATOR & CABINETRY
Page 7 - INSTALLATION KIT COMPONENTS LIST
Page 8 - INSTALLATION PREPARATION
8 Rev.13052022 INSTALLATION PREPARATION DOOR HINGE Available with left or right hand hinge options, however, each model is still reversible This appliance/s are designed to fit into cabinetry with 18mm thickness This appliance must never be installed close to its sources or cooking appliances. It sh...
Page 9 - INSTALLING YOUR APPLIANCE INTO THE CABINETRY
9 Rev.13052022 INSTALLING YOUR APPLIANCE INTO THE CABINETRY PLACING THE REFRIGERATOR INTO THE CABINET With the help of another individual, manoeuvre the appliance into the cabinet. Pull the power cord through a pre drilled hole at the back of the cabinet or a the power point is inside the cabinet, p...
Page 10 - ATTACHING THE DOOR PANEL
10 Rev.13052022 ATTACHING THE DOOR PANEL Close the appliance door and measure from the top of the cabinet cavity to the bottom of the door bracket on both sides ensuring that the distance is the same. You will need to know this measurement when pre-drilling the fixing points in the decor panel. Remo...
Page 11 - MOUNTING THE DOOR PANEL TO THE APPLIANCE
11 Rev.13052022 MOUNTING THE DOOR PANEL TO THE APPLIANCE Ensure that there is a gap of 3–4 mm between the non-hinge side of the appliance and the vertical cabinet wall.Mount the door panel onto the appliance door using the screw thread ad a fixing guide.Screw the bracket back onto to the appliance a...
Page 12 - IMPORTANT
12 Rev.13052022 IMPORTANT After completing the installation, check that the appliance is secured within the cabinet unit and that the doors close and open correctly. If there is no resistance from the door seals when opening the doors, then it is probable that the appliance and all decor doors are n...
Page 13 - BEFORE FIRST USE
13 Rev.13052022 BEFORE FIRST USE You must allow the appliance to settle for at least twenty four (24) hours prior to switching the power on. It is recommended that you clean the interior of the appliance prior to first use, using a solution of bicarbonate of soda and warm water and then thoroughly d...
Page 14 - GENERAL FRIDGE/FREEZER USE
14 Rev.13052022 GENERAL FRIDGE/FREEZER USE • Never put liquids in the refrigerator uncovered. • Never put hot foods in the refrigerator. Warm food should be allowed to cool to room temperature before being put into the refrigerator. • Nothing should rest against the rear wall of the refrigerator. • ...
Page 15 - STORAGE
15 Rev.13052022 STORAGE The fridge section is for short term food storage. Although low temperatures can be maintained, extended periods of food storage is not recommended. As the cold air circulates within the fridge, the temperature can vary between the different sections. As such, foods should be...
Page 16 - CONTROL PANEL; Display
16 Rev.13052022 CONTROL PANEL FRIDGE/FREEZER CONTROL PANEL A. FRESH ZONE TEMPERATURE ADJUSTMENT SENSOR This button is used to adjust the temperature within the Fresh Zone. Press this button once to alter the display to show the current temperature in the Fresh Zone, and then as many times as necessa...
Page 17 - CARE AND CLEANING
17 Rev.13052022 CARE AND CLEANING AINT3000 The fridge and crisper sections should be cleaned using a solution of bicarbonate soda and lukewarm water. Do not use abrasive products or detergent. After washing and dry thoroughly. Clean the shelves, drawers and balconies separately by hand with a mild s...
Page 18 - DEFROSTING THE APPLIANCE
18 Rev.13052022 DEFROSTING THE APPLIANCE DEFROSTING THE AINT3000 FRIDGE The fridge is self defrosting. Any water created will run out of the fridge through the channel at the back of the fridge, unless the drain hole is blocked. It is important to keep the channel clear at all times using the cleani...
Page 19 - TROUBLESHOOTING; CLIMATE RANGE
19 Rev.13052022 TROUBLESHOOTING If you have any problems with your appliance, you should check the troubleshooting prior to calling the Customer Care. IF THE APPLIANCE IS NOT WORKING, YOU SHOULD CHECK: • That there is power to the appliance. • The house fuses are intact and the fuse in the plug has ...
Page 20 - Warranty Card
20 Rev.13052022 Warranty Card Worldwide Appliances Pty Limited A.B.N. 45868077422 Distributed by Eurolinx pty Ltd Office: 48-50 Moore Street, Leichhardt N.S.W 2040 Post: Locked Bag 3000, Annandale, N.S.W 2038 P: 1300 694 583 WARRANTY REGISTRATION Your ongoing satisfaction with your artusi product is...
Page 21 - continued; Warranty Card tear off
21 Rev.13052022 DON’T FORGET TO REGISTER YOUR WARRANTY ONLINE NOW AT www.eurolinx.support artusi.com.au 4. Time for Claim under the Warranty You must make any claim under this Warranty within twenty eight (28) days after the occurrence of an event which gives rise to a claim pursuant to the Warranty...
