AMX NXB-KNX - Manuals

AMX NXB-KNX – Manual in PDF format online.

Manuals:

Manual

Manual AMX NXB-KNX

Summary

Page 2 - AMX Limited Warranty and Disclaimer

AMX Limited Warranty and Disclaimer This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity. AMX warrants its products to be free of defects in material and wo...

Page 3 - Table of Contents

Table of Contents i NXB-KNX NetLinx KNX Interface Table of Contents Overview ............................................................................................................ 1 Product Specifications ............................................................................................

Page 5 - Overview; Product Specifications; NXB-KNX Specifications

Overview 1 NXB-KNX NetLinx KNX Interface Overview The NetLinx NXB-KNX interface (FG2031-01) allows AMX NetLinx Integrated Controllers the ability to control, integrate and communicate with homes and buildings that utilize the KNX communication protocol. KNX is the world’s first open, royalty-free, a...

Page 7 - Installation; Wiring and Connections; After you have completed the installation, consult the

Installation 3 NXB-KNX NetLinx KNX Interface Installation Wiring and Connections The NXB-KNX is installed between the NetLinx Master and the KNX control bus, and passes NetLinx control commands to the KNX control bus via 2-wire twisted pair cabling, as indicated in FIG. 1: After you have completed t...

Page 8 - The NXB-KNX uses CAT5/CAT6 wire via the Ethernet port for PoE power.; KNX Connector

Installation 4 NXB-KNX NetLinx KNX Interface PoE (Power Over Ethernet) The NXB-KNX uses CAT5/CAT6 wire via the Ethernet port for PoE power. Use the PS-POE-AF Power over Ethernet Injector (FG423-80) to simplify wiring and installation by eliminating the need for an AC outlet at each point of installa...

Page 9 - Configuration; Bonjour for; The NXB-KNX is set to

Configuration 5 NXB-KNX NetLinx KNX Interface Configuration Overview NXB-KNX units have a built-in WebConsole that allows you to make various configuration settings via a web browser on any PC that has access to the NXB-KNX device. The web console consists of a series of web pages that are collectiv...

Page 10 - Accessing the WebConsole; From any PC that has access to the LAN that the NXB-KNX resides on:; Admin Menu; Admin

Configuration 6 NXB-KNX NetLinx KNX Interface Accessing the WebConsole From any PC that has access to the LAN that the NXB-KNX resides on: 1. Open a web browser and type the IP Address of the target NXB-KNX unit in the Address Bar. 2. Press Enter to access the WebConsole for the specified NXB-KNX un...

Page 11 - Select; Security Settings; from the Admin drop-down menu to open the; Enable / Disable Security Settings

Configuration 7 NXB-KNX NetLinx KNX Interface Security Settings Select Security Settings from the Admin drop-down menu to open the Security Settings page (FIG. 4). Use the options on the page to specify security options and login information for this NXB-KNX unit. Enable / Disable Security Settings ...

Page 12 - Logging Into the Configuration Manager (With Security Enabled); Web; IP Settings

Configuration 8 NXB-KNX NetLinx KNX Interface Click Accept to save your changes. Note that changes on this page take effect immediately. Click Cancel to cancel any changes. Logging Into the Configuration Manager (With Security Enabled) Login is only required if the Web and/or Admin security options ...

Page 13 - Port Settings

Configuration 9 NXB-KNX NetLinx KNX Interface Port Settings Select Port Settings from the Admin drop-down menu to open the Port Settings page (FIG. 7). Use the options on the page to specify various Port settings for this NXB-KNX unit. The options on this page provide inputs for enabling and disabli...

Page 14 - Hover the cursor over the; Clock Manager; option in the Admin menu to open the Clock Manager sub-menu; Clock Manager - Mode Manager; Select the main Clock Manager entry in the Admin Menu, or select; Mode; and the

Configuration 10 NXB-KNX NetLinx KNX Interface Clock Manager Hover the cursor over the Clock Manager option in the Admin menu to open the Clock Manager sub-menu (FIG. 8). Each of the options listed in the submenu are also accessible via options on the Clock Manager page (FIG. 9). Clock Manager - Mod...

Page 15 - Accept; Click; Cancel; to cancel any changes.; Clock Manager - Daylight Savings; Daylight Savings; Daylight Savings Manager

Configuration 11 NXB-KNX NetLinx KNX Interface Click Accept to save your changes. Note that changes on this page take effect immediately. Click Cancel to cancel any changes. Clock Manager - Daylight Savings Select Daylight Savings from the Clock Manager sub-menu (or from the main Clock Manager page)...

Page 16 - Only one NIST server is selectable at any given time.

Configuration 12 NXB-KNX NetLinx KNX Interface Click Accept to save your changes. Note that changes on this page take effect immediately. Click Cancel to cancel any changes. Clock Manager - NIST Servers Select NIST Servers from the Clock Manager sub-menu (or from the main Clock Manager page), and th...

Page 17 - Application Upgrade; Application Upgrade; Current Application Information; Reboot

Configuration 13 NXB-KNX NetLinx KNX Interface Application Upgrade Select Application Upgrade from the Admin drop-down menu to open the Application Upgrade page (FIG. 13). This page allows you view information on the application file currently loaded on this unit, and to upload an application .JAR f...

Page 18 - Firmware Upgrade; Firmware Upgrade Manager; Current Firmware Information

Configuration 14 NXB-KNX NetLinx KNX Interface Firmware Upgrade Select Firmware Upgrade from the Admin drop-down menu to open the Firmware Upgrade Manager page (FIG. 14). Use the options on the page to upgrade the firmware on this NXB-KNX unit. This page allows you view information on the firmware v...

Page 19 - Programming - Telnet Commands; Terminal Commands; Establishing a Terminal Connection Via Telnet; cmd; Open; OK; Enter; login; section on page 5

Programming - Telnet Commands 15 NXB-KNX NetLinx KNX Interface Programming - Telnet Commands Overview The NXB-KNX supports Telnet communications. This type of terminal communication can be accessed remotely, via TCP/IP. Telnet is an insecure form of terminal communication, since it does not require ...

Page 20 - Help; and display the Program port commands described below:

Programming - Telnet Commands 16 NXB-KNX NetLinx KNX Interface Terminal Commands The Terminal commands listed in the following table can be sent directly to the NXB-KNX via Telnet terminal session. In your terminal program, type " Help " or a question mark (" ? ") and < Enter >...