AMX NXB-KNX - Manual

AMX NXB-KNX

AMX NXB-KNX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
Page: / 28

Table of Contents:

  • Page 2 – AMX Limited Warranty and Disclaimer
  • Page 3 – Table of Contents
  • Page 5 – Overview; Product Specifications; NXB-KNX Specifications
  • Page 7 – Installation; Wiring and Connections; After you have completed the installation, consult the
  • Page 8 – The NXB-KNX uses CAT5/CAT6 wire via the Ethernet port for PoE power.; KNX Connector
  • Page 9 – Configuration; Bonjour for; The NXB-KNX is set to
  • Page 10 – Accessing the WebConsole; From any PC that has access to the LAN that the NXB-KNX resides on:; Admin Menu; Admin
  • Page 11 – Select; Security Settings; from the Admin drop-down menu to open the; Enable / Disable Security Settings
  • Page 12 – Logging Into the Configuration Manager (With Security Enabled); Web; IP Settings
  • Page 13 – Port Settings
  • Page 14 – Hover the cursor over the; Clock Manager; option in the Admin menu to open the Clock Manager sub-menu; Clock Manager - Mode Manager; Select the main Clock Manager entry in the Admin Menu, or select; Mode; and the
  • Page 15 – Accept; Click; Cancel; to cancel any changes.; Clock Manager - Daylight Savings; Daylight Savings; Daylight Savings Manager
  • Page 16 – Only one NIST server is selectable at any given time.
  • Page 17 – Application Upgrade; Application Upgrade; Current Application Information; Reboot
  • Page 18 – Firmware Upgrade; Firmware Upgrade Manager; Current Firmware Information
  • Page 19 – Programming - Telnet Commands; Terminal Commands; Establishing a Terminal Connection Via Telnet; cmd; Open; OK; Enter; login; section on page 5
  • Page 20 – Help; and display the Program port commands described below:
Loading the manual

O p e r a t i o n / R e f e r e n c e G u i d e

C o n t r o l S y s t e m A c c e s s o r i e s

NXB-KNX

NetLinx KNX Interface

I n i t i a l R e l e a s e : 5 / 1 5 / 2 0 0 8

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - AMX Limited Warranty and Disclaimer

AMX Limited Warranty and Disclaimer This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity. AMX warrants its products to be free of defects in material and wo...

Page 3 - Table of Contents

Table of Contents i NXB-KNX NetLinx KNX Interface Table of Contents Overview ............................................................................................................ 1 Product Specifications ............................................................................................

Page 5 - Overview; Product Specifications; NXB-KNX Specifications

Overview 1 NXB-KNX NetLinx KNX Interface Overview The NetLinx NXB-KNX interface (FG2031-01) allows AMX NetLinx Integrated Controllers the ability to control, integrate and communicate with homes and buildings that utilize the KNX communication protocol. KNX is the world’s first open, royalty-free, a...

Other AMX Models

All AMX Other