American Standard Saver Bath Walls - Manuals

2 7 5 4 74 8 - 10 0 R e v. C Installation for use with tub Model# 2647.202 The studs should be located as shown to properly support walls. Provide additional studs where illustrated. (below) 8-1/4" (210mm) 8-1/4" (210mm) 30" (762mm) 6"(152mm) 12" (305mm) 60" (1524mm) 9-1/4...

3 7 5 4 74 8 - 10 0 R e v. C 1 2 INSTALLATION PROCEDURES: If you plan to install a bath/shower door, a 1 x 4 must be installed in the pocket on the back of both side walls. A) Cut one end of the 1 x 4 to 45° as shown. (Fig.1) Then cut the 1 x 4 to a length of 57-1/2". B) Apply a bead of tub surr...

7 5 4 74 8 - 1 0 0 R e v. C 6 7 6 Install temporary braces to hold the center of the back and side panels tight to the studs for approximately 24 hours while adhesive sets. Add cushioning between panels and braces to prevent scratching the panels. When installing greenboard, position drywall screws ...