American Standard 2470.002 - Manual
American Standard 2470.002 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
STRATFORD™ 5-1/2'
WHIRLPOOL AND BATHING POOL
AMERICAST® BRAND ENGINEERED MATERIAL
STRATFORD 5-1/2' WHIRLPOOL AND
BATHING POOL
❏
2470.028W Whirlpool Featuring System I:
• Americast
®
brand engineered material
• Acid-resistant porcelain finish
• Integral lumbar support with beveled headrest
• Full slip-resistant coverage
• End drain outlet
• 1.5 HP single speed, self-draining pump/motor
• Factory installed power cord and plug
• Six multi-directional and flow-adjustable jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater connection
system
• Factory installed and tested whirlpool system
❏
2470.128W Whirlpool Massage featuring
System I with Grab Bar Drilling
• Same as 2470.028W except with grab bar
drilling (grab bar must be ordered
seperately)
❏
2470.028WC StayClean™ Whirlpool
Massage featuring System I
• Same as 2470.018W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®
❏
2470.128WC StayClean™ Whirlpool
Massage featuring System I
• Same as 2470.128W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan® and grab bar
drilling (grab bar must be ordered
seperately)
❏
2470.002 Bathing Pool
❏
2470.102 Bathing Pool with Grab Bar Drilling
• Same as 2470.002 except with grab bar
drilling (grab bar must be ordered seperately
Nominal Dimensions: 66" x 32" x 20"
(1676 x 813 x 508mm)
Bathing Well Dimensions: 60" x 27" x 18"
(1524 x 686 x 457mm)
Americast
®
brand engineered material is a
composition of porcelain bonded to enameling
grade metal, bonded to a patented structural
composite.
© 2005 American Standard Inc.
BV-36
Rev. 4/05
NOTE: Roughing-in dimensions shown on reverse
side of page.
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ASME A112.19.4M for Americast Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specified - Required:
❏
Color:
❏
Bath Filler: (specify finish)
❏
Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏
Safe-T-Heater*: 9075.120
❏
Jet Trim Ring Kit: 9860.200-one per kit
(specify color) for Body Massage Jets only
❏
Universal Tile Bead Kit: 751755-100
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
