American Standard M968641 - Manuals

M 9 6 8 6 4 1 Operate LIFT KNOB (1) to verify that STOPPER (2) opens and closes. Note: If STOPPER (2) does not open and close properly then refer to the “troubleshooting section” of these instructions. CHECK OPERATION OF POP-UP 8 2 MAKE WATER SUPPLY AND WASTE CONNECTIONS 9 Thread CABLE CONNECTOR (1)...

1 2 4 5 6 2.5mm HEX KEY REMOVE INSTALL 7 8 M 9 6 8 6 4 1 1 4 10 TEST INSTALLED FITTING With HANDLE (1) in OFF position, turn on WATER SUPPLIES (2) and check all connections for leaks. Remove AERATOR (3) . Operate HANDLE (1) to flush water lines thoroughly. Replace AERATOR (3) . 3 CHECK DRAIN CONNECT...

M 9 6 8 6 4 1 Speed Connect™ Drain Troubleshooting Guide Disconnect the Cable from the Drain by threading the Cable Connector (1) counter-clockwise. Fig. A. Look at the area on the Drain Body where the Cable was attached and locate the component labeled as “Cam” and “Cam Cap” in the illustration. Fi...