American Standard 710007-100 - Manuals

7 1 0 0 0 7 - 1 0 0 2 1 3 INSTALLATION PROCEDURES: Determine side at which the door will pivot (left or right).The pivot side should be opposite the showerhead. Measure width of the opening at the centerline of bottom. NOTE: This door swings out only. Verify door will clear any obstructions before i...

7 1 0 0 0 7 - 1 0 0 3 On side opposite pivot jamb, drill a 1/8" hole in threshold located 5/8" from wall and 7/8" from flat edge of threshold. Fasten positioning spacer to threshold using one #8 x 1" pan head screw. For doors with narrow strikes (e.g. Model #804NS) position-ing space...

7 1 0 0 0 7 - 1 0 0 4 13 Place magnetic jamb over adjustment rail with magnetic strip facing to outside of shower. Close door and adjust magnetic jamb to allow 1/8" to 1/4" clearance between magnetic jamb and door panel. NOTE: If magnets repel each other, remove and reverse. To adjust magnet...