AMD XP-K7V400 - Manuals

AMD XP-K7V400 – Manual in PDF format online.

Manuals:

Manual

Manual AMD XP-K7V400

Summary

Page 2 - Copyright Declaration

Motherboard XP-K7V400 Jun. 18, 2004 Jun. 18, 2004 XP-K7V400 Motherboard Copyright Declaration © 2004 Gigatrend Technology Co., Ltd. All rights reserved. No part of this manual may bereproduced, copied, translated, or transmitted in any form or by any means without expresspermission from Gigatrend Te...

Page 3 - Contents

Contents Motherboard Layout ........................................................................ 4 1. Production Introduction ............................................................. 5 1.1. Feature Summary .............................................................................. 5 1.2....

Page 4 - English; Motherboard Layout

4 English Motherboard Layout CODEC KB_MS COMA LPT GAME PORT USB LAN F_AUDIO LINE_OUT LINE_IN MIC_IN XP-K7V400 SOCKET A CPU_FAN ATX CD_IN VIA KT400A BIOS AGP COMB FDD F_USB1 BATTERY IT8705F IDE1 VIA 8235 PCI1 IDE2 PCI2 PCI3 PCI4 F_PANEL PWR_LED DDR2 DDR3 SYS_FAN PCI5 DDR1 RTL8100BL SW1 RAM_LED

Page 5 - Production Introduction; Feature Summary

English 5 CPU Socket A for AMD Athlon TM XP/Athlon TM /Duron TM processor 333/266MHz FSBSupports 1.4GHz and faster Chipset North Bridge: VIA KT400ASouth Bridge: VIA VT8235 Memory 3 184-pin DDR DIMM sockets, support up to 3GB DRAM (Max)Supports DDR400/DDR333/DDR266 DIMMSupports only 2.5V DDR SDRAM Sl...

Page 6 - I/O Back Panel and Connectors & Jumper Setting; Connectors & Jumper Setting

6 English 1.2. I/O Back Panel and Connectors & Jumper Setting 1.2.2. Connectors & Jumper Setting FDD (Floppy Disk Drive Connector) The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one edge of the FDD cable is marked in red, please attach this marked ed...

Page 9 - Hardware Installation; Installation of a Socket A CPU and Fan Sink

English 9 2. Hardware Installation 2.1. Installation of a Socket A CPU and Fan Sink 2 When the CPU is inserted into its position, gently press the metal lever downwards until a click is heard. Then add aneven layer of heat sink paste between the CPU and fan sink for heat dissipation. 3 Position and ...

Page 10 - Installation of Memory

10 English 2.2. Installation of Memory 1. Before installing or removing memory, please make sure that the computer poweris turned off to prevent hardware damage. 2. Please make sure that the memory used is supported by the motherboard. 3. Memory modules have a foolproof insertion design. The memory ...

Page 11 - BIOS Setup

English 11 3. BIOS Setup BIOS (Basic Input and Output System) stores all the information of the motherboard settings that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user to make changes in BIOS configurations that are required or to activate certain features.T...

Page 12 - Standard CMOS Features

12 English <F6> Gives the list of options available for each item <F7> Return to Optimized default values (not applicable to main setup screen) <F8> Enters BIOSNow ! feature <F9> Displays system information <F10> Saves settings and exits setup 3.2. Standard CMOS Feature...

Page 13 - Floppy 3 Mode Support

English 13 n Floppy 3 Mode Support Allows user to configure a Japanese standard 3 Mode floppy drive. Options: Disabled (No 3 Mode drive installed) Drive A (3 Mode Drive installed in A:) Drive B (3 Mode Drive installed in B:)Both (3 Mode Drive installed in A: and B:) n Halt on Tells the BIOS specific...

Page 14 - Advanced BIOS Features; Password Check; Boot to OS2 or DR-DOS

14 English 3.3. Advanced BIOS Features ø Allows the configuration of advanced settings such as boot sequence, password check, etc. CMOS Setup Utility-C op yright (C ) 1984-2004 Award So ftware Ad van ced BIOS Features Firs t Boo t Device [Flopp y] Secon d Boo t Device [HDD-0] Th ird Bo ot Device [C ...

Page 15 - OnChip IDE Channel 0; Integrated Peripherals

English 15 n OnChip IDE Channel 0 Allows the user to enable or disable the first onboard IDE channel (default:Enabled) n OnChip IDE Channel 1 Allows the user to enable or disable the second onboard IDE channel (default:Enabled) n AC97 Audio Allows the user to use the onboard AC97 audio (default:Auto...

Page 17 - Power Management Setup; ACPI Suspend Type

English 17 CMOS Setup Utility-C op yright (C ) 1984-2004 Award So ftware Po wer Managemen t Setup AC PI Susp end Ty pe [S1(POS)] x USB Device Wake-Up Fro m S3 Disabled Po wer LED in S1 s tate [Blinkin g] So ft-Off b y PWR -BTTN [Ins tan t-Off] AC BAC K Fu nction [Soft-Off] Keybo ard Power On [Disabl...

Page 18 - PnP/PCI Configuration

18 English 3.6. PnP/PCI Configuration ø This menu allows you to configure your PCI slots. You can assign IRQ's for various PCI slots. n PCI1/PCI5 IRQ Assignment Allows you to assign an IRQ for the first/fifth PCI slot. Options:Auto,3,4,5,7,9,10,11,12,14, 15 (default:Auto) n PCI2 IRQ Assignment Allow...

Page 19 - Current System Temperature; CPU/System FAN Fail Warning; Current CPU Temperature; PCI4 IRQ Assignment

English 19 3.7. PC Health Status ø This menu displays the current CPU temperature, the fan speeds, voltages etc. n Current Voltage(V) Vcore / DDR Vtt / +3.3V / +5V / +12V Automatically checks system voltage n Current System Temperature Automatically checks system temperature n Current CPU/System FAN...

Page 20 - Frequency/Voltage Control; Auto Detect PCI/DIMM Clk; CPU Host Clock Control

20 English 3.8. Frequency/Voltage Control ø This allows user to configure CPU frequency and voltage settings. ø This section is very dangerous for inexperienced users, and therefore it is notrecommended that these settings be altered. An incorrect setting can result in system instability, corrupt da...

Page 21 - Load Fail-Safe Defaults; Load Optimized Defaults; Set User Password; CPU OverVoltage Control; AGP OverVoltage Control; DIMM OverVoltage Control

English 21 3.9. Load Fail-Safe Defaults ø Use this option to reset your BIOS settings to the system defaults. You should only use this if you are encountering serious problems. Please select <Y> and <Enter> to load Fail-Safe defaults. Once this is loaded, your system may be slowed since ...

Page 22 - Driver Installation; Exit Without Saving

22 English 4. Driver Installation Driver installation for the Windows 98/98SE/200/ME/XP operating systems is simple. Once you insert the provided driver disks into your optical drive, the AUTORUN screen will appear.If this screen does not appear, you can use "D:\setup.exe" (with "D" ...