Page 2 - LV-651User’s Manual; Copyright; All trademarks are the property of their respective holders.
LV-651User’s Manual Copyright Copyright 2006. All rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protected b...
Page 3 - Packing List; Please check the package before you starting setup the system; COM port Cable x1; User’s Manual x 1; I/O Shield Cable x 1
LV-651User’s Manual Packing List Please check the package before you starting setup the system Hardware: LV-651 series motherboard x 1 Cable Kit: COM port Cable x1 Printed Matters: User’s Manual x 1 Driver CD x 1 44-pin ATA33 IDE Cable x 1 I/O Shield Cable x 1 Floppy Cable x 1 44pin 40pin 44pin Powe...
Page 4 - Index; Chapter 1 ........................................................................7; Digital Display
LV-651User’s Manual Index Chapter 1 <Introduction>………………………………………………………………7 1.1 <Product Overview> …………………………………………………………..7 1.2 <Product Specification> ............................................................................8 1.3 <Mechanical Drawing> .......................
Page 5 - Appendix B ..................................................................43; C.2 Memory Address Map ............................................................47
LV-651User’s Manual 2.14.2 <Power Output>…………………………………….….32 2.14.3 <Fan Connector>………………………………………………….33 2.15 <Indicator and Switch>………………………………………………….34 Chapter 3 <BIOS Setup>…………………………………………………………….37 Appendix A <I/O Port Pin Assignment>………………………………………….38 A.1 <I...
Page 7 - Low Power Consumption; embedded OS and up to DDR SDRAM.; Single Voltage Input
LV-651 User’s Manual Introduction Product Overview 7 Chapter 1 <Introduction> 1.1 <Product Overview> LV-651 is the Mini-ITX motherboard with AMD Geode LX800 platform, with onboard VGA, AC97 audio, Giga LAN interface. Based on the AMD Geode LX800 processor, the board provides many advance...
Page 8 - General Specification; Fanless with heat sink only
LV-651 User’s Manual Introduction Product Specification 8 1.2 <Product Specification> General Specification Form Factor Mini -ITX motherboard CPU Embedded AMD Geode LX800 500MHz Fanless with heat sink only Memory One 184-pin DDR DIMM socket support up to 1GB DDR SDRAM Optional on board 256M DD...
Page 10 - Mechanical Drawing
LV-651 User’s Manual Introduction Mechanical Drawing 10 1.3 <Mechanical Drawing>
Page 11 - Arbitor
LV-651 User’s Manual Introduction Block Diagram 11 1.4 <Block Diagram> AC97 Audio BIOS Floppy GPIO IrDA Mini PCI slot 1 x 184-pin DDR DIMM Up to 1GB IEEE1394 TFT/LVDS LCD CompactFlash & IDE 4 x USB2.0 ports 83627HG-AW PCI/33Mhz LX800 CS5536 Arbitor IT8209 VGA monitor 8110S-32 RTL LPT Port 2 X ...
Page 12 - IDE
LV-651 User’s Manual Hardware Setup Connector Location 12 Chapter 2 <Hardware Setup> 2.1 <Connector Location> DC_OUT CDIN PS2 SYSFAN CN_INV CN_LVDS ATX MINIPCI CN_COM1/2 CN_LCD DIMM JFRNT CN_USB1 CN_DIO FDD IDE CF PCI CN_AUDIO LPT CRT USB_RJ45 FIREWIRE AUDIO DC_IN
Page 13 - CMOS Operating/Clear Setting; JVLCD; LCD Panel Voltage Setting; JAT; Select ATX or AT power on function; JCSEL1
LV-651 User’s Manual Hardware Setup Jumper Reference 13 2.2 <Jumper Reference> Jumper Function JRTC CMOS Operating/Clear Setting JV1/2 Setting COM Port Voltage JVLCD LCD Panel Voltage Setting JCSEL1/2 COM2 RS-232/422/485 Mode Selection JAT Select ATX or AT power on function JCSEL1 JRTC JCSEL2 ...
Page 15 - designed for fanless system.; Please check the pin number to match the socket side well
LV-651 User’s Manual Hardware Setup CPU and Memory Setup 15 2.4 <CPU and Memory Setup> 2.4.1 <CPU Setup> The board integrates AMD Geode LX800 500MHz processor with special design for power appliance. It requires only 3.8W power consumption at most, and is totally designed for fanless sys...
Page 16 - CMOS; JRTC
LV-651 User’s Manual Hardware Setup CMOS Setup 16 2.5 <CMOS Setup> The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its default values. Jumper: JRTC Type: Onboard 3-pin jumper J...
Page 17 - Compact Flash Type II socket on the solder side.
LV-651 User’s Manual Hardware Setup Enhanced IDE & CF Interface 17 2.6 <Enhanced IDE & CF Interface> The board has one Ultra DMA33 IDE interface to support up to 2 ATAPI devices, and one Compact Flash Type II socket on the solder side. IDE 44 1 2 43 CF
Page 18 - to connect the floppy device.
LV-651 User’s Manual Hardware Setup Floppy Port 18 2.7 <Floppy Port> The board provides a slim type floppy port; please use the 26-pin FPC cable in the package to connect the floppy device. FDD 4. Lift up this plastic bar 5. Slot the cable in (Blue paste for outside) 6. Press back the plastic ...
Page 19 - video engine supports following specified functions:; CRT
LV-651 User’s Manual Hardware Setup LAN Interface 19 2.8 <LAN Interface> The board integrates with one Realtek RTL8110S-32 Gigabit Ethernet controller. The Realtek RTL8110S-32 supports triple speed of 10/100/1000Base-T, with IEEE802.3 compliance and Wake-On-LAN supported. 2.9 <Onboard Displ...
Page 20 - LCDVCC
LV-651 User’s Manual Hardware Setup Digital Display 20 2.9.2 <Digital Display> The board provides one 40-pin LVDS connector for 18-bit single channel panel, supports up to 1024 x 768 of resolution, with one LCD backlight inverter connector and one jumper for panel voltage setting Connector: CN...
Page 21 - GND
LV-651 User’s Manual Hardware Setup Digital Display 21 Connector: CN_LVDS ( for 24bit Single channel LVDS panel ) Type: 40-pin header (40 x 2 pitch 2.0 mm) Connector model: Hirose DF13- 40DP-1.25V Pin Signal (18-bit) Pin Signal (24-bit) 2 LCDVCC 1 LCDVCC 4 GND 3 GND 6 NC 5 TA2- 8 NC 7 TA2+ 10 GND 9 ...
Page 22 - LCDVCC
LV-651 User’s Manual Hardware Setup Digital Display 22 Connector: CN_LVDS ( for 18bit Single channel LVDS panel ) Type: 40-pin header (40 x 2 pitch 2.0 mm) Connector model: Hirose DF13-40DP-1.25V Pin Signal (18-bit) Pin Signal (24-bit) 2 LCDVCC 1 LCDVCC 4 GND 3 GND 6 TA1- 5 N/C 8 TA1+ 7 N/C 10 GND 9...
Page 23 - ENAVDD
LV-651 User’s Manual Hardware Setup Digital Display 23 Connector: CN_LCD Type: onboard 2 x 20-pin header with housing, pitch=2.0mm Pin Signal Pin Signal 1 ENAVDD 2 ENAVEE 3 GND 4 GND 5 VLCD 6 VLCD 7 GND 8 GND 9 GFP0 10 GFP1 11 GFP2 12 GFP3 13 GFP4 14 GFP5 15 GFP6 16 GFP7 17 GFP8 18 GFP9 19 GFP10 20 ...
Page 24 - local cable manufacture to make cables.; LCD Installation Guide:; the; LCD panel; and the; backlight inverter; jumper; For sample illustrator only
LV-651 User’s Manual Hardware Setup Digital Display 24 To setup the LCD, you need the component below: 1. A panel with LVDS interfaces. 2. An inverter for panel’s backlight power. 3. A LCD cable and an inverter cable. For the cables, please follow the pin assignment of the connector to make a cable,...
Page 25 - The panel type mapping is list below:; Panel Number Resolution
LV-651 User’s Manual Hardware Setup Digital Display 25 After setup the devices well, you need to select the LCD panel type in the BIOS. The panel type mapping is list below: Panel Number Resolution 1 640 x 480 2 800 x 600 3 1024x 768
Page 26 - CDIN
LV-651 User’s Manual Hardware Setup Onboard Audio Interface 26 2.10 <Onboard Audio Interface> The board provides the onboard AC97 2 channel audio interface with Realtek ALC203. Connector: CN_AUDIO Type: 10-pin (2 x 5) 2.54mm x 2.54mm-pitch header Pin Description Pin Description 1 LIN_L 2 Groun...
Page 27 - LV-651 User’s Manual Hardware Setup; provides up to 480Mbps of transferring rate.; Interface; Transfer Rate; USB
LV-651 User’s Manual Hardware Setup USB2.0 Interface 27 2.11 <USB2.0 Interface> Based on AMD CS5536, the board provides 2 x USB2.0 ports. The USB2.0 interface provides up to 480Mbps of transferring rate. Interface USB2.0 Controller CS5536 Transfer Rate Up to 480Mb/s Output Voltage 500mA USB 1 ...
Page 28 - Ground
LV-651 User’s Manual Hardware Setup USB2.0 Interface 28 Connector: CN_USB Type: 10-pin (5 x 2) header for USB1/2 Ports Pin Description Pin Description 1 VCC 2 VCC 3 Data0- 4 Data1- 5 Data0+ 6 Data1+ 7 Ground 8 Ground 9 Ground 10 N/C P.S : The USB2.0 will be only active when you connecting with the U...
Page 29 - purpose I/O port for system control like POS or KIOSK.; Pin; Ground
LV-651 User’s Manual Hardware Setup GPIO Interface 29 2.12 <GPIO Interface> The board provides a programmable 8-bit digital I/O interface; you can use this general purpose I/O port for system control like POS or KIOSK. Connector: CN_DIO Type: onboard 2 x 6-pin header, pitch=2.0mm Pin Descripti...
Page 32 - The; ATX; Ground 3; Floppy
LV-651 User’s Manual Hardware Setup Power and Fan Connector 32 2.14 <Power and Fan Connector> The LV-651 provides a standard ATX power supply with 20-pin ATX connector, and the board provides one 4-pin P4 additional use power connector for internal power supply and one 3-pin cooler fan connect...
Page 33 - Ground
LV-651 User’s Manual Hardware Setup Power and Fan Connector 33 2.14.3 <Fan Connector> Connector: SYSFAN Type: 3-pin fan wafer connector Connector: DC_IN Type: 4-pin DC power connector Pin Description Pin Description 1 +12V 2 Ground 3 +12V 4 Ground Pin Description Pin Description Pin Descriptio...
Page 34 - JFRNT; Function
LV-651 User’s Manual Hardware Setup Indicator and Switch 34 2.15 <Indicator and Switch> The JFRNT provides front control panel of the board, such as power button, reset and beeper, etc. Please check well before you connecting the cables on the chassis. Connector: JFRNT Type: onboard 14-pin (2 ...
Page 35 - LV-651 User’s Manual; (This Page is Left For Blank
LV-651 User’s Manual 35 (This Page is Left For Blank
Page 36 - DEL
LV-651 User’s Manual BIOS Setup BIOS Setup 36 Chapter 3 <BIOS Setup> The motherboard uses the Award BIOS for the system configuration. The Award BIOS in the single board computer is a customized version of the industrial standard BIOS for IBM PC AT-compatible computers. It supports Intel x86 a...
Page 38 - Reset
LV-651 User’s Manual I/O Port Pin Assignment IDE Port 38 Appendix A <I/O Port Pin Assignment> A.1 <IDE Port> Connector: IDE1 Type: 44-pin (22 x 2) box header Pin Description Pin Description 1 Reset 2 Ground 3 D7 4 D8 5 D6 6 D9 7 D5 8 D10 9 D4 10 D11 11 D3 12 D12 13 D2 14 D13 15 D1 16 D14...
Page 39 - INDEX
LV-651 User’s Manual I/O Port Pin Assignment Floppy Port 39 A.2 <Floppy Port> Connector: FDD Type: 26-pin connector Pin Description Pin Description 1 VCC 2 INDEX 3 VCC 4 DRV0 5 VCC 6 DSKCHG 7 DRV1 8 N/C 9 MTR1 10 MTR0 11 RPM 12 DIR 13 N/C 14 STEP 15 Ground 16 WRITE DATA 17 Ground 18 WRITE GATE...
Page 41 - Mouse; BVCC; LPT; Ground
LV-651 User’s Manual I/O Port Pin Assignment PS/2 Keyboard & Mouse Port 41 A.7 <PS/2 Keyboard & Mouse Port> Connector: Keyboard Type: 6-pin Mini-DIN connector on bracket Pin 1 2 3 4 5 6 Description N/C KB_CK BVCC IOGND N/C KB_DT Connector: Mouse Type: 6-pin Mini-DIN connector on bracke...
Page 43 - B.1 BIOS Auto Flash Tool; Method
LV-651 User’s Manual Flash BIOS BIOS Auto Flash Tool 43 Appendix B <Flash BIOS> B.1 BIOS Auto Flash Tool The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below: TU http://www.award.com UT T File name of the ...
Page 48 - Logical Device 8
LV-651 User’s Manual Watch Dog timer Setting Watch Dog timer Setting 48 Appendix D <Watch Dog timer Setting > The watchdog timer makes the system auto-reset while it stops to work for a period. The integrated watchdog timer can be setup as system reset mode by program. Timeout Value Range - 1 ...
Page 50 - Contact Information; Any advice or comment about our products and service, or anything; Address
LV-651 User’s Manual Contact Information Contact Information 50 Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business. Annso Technolog...