AMD 7ZMMC - Manuals - manualsarea.com

Page 2 - FCC Compliance Statement:; -Reorient or relocate the receiving antenna

FCC Compliance Statement: This equipment has been tested and found to comply with limits for a Class Bdigital device, pursuant to Part 15 of the FCC rules. These limits are designed toprovide reasonable protection against harmful interference in residentialinstallations. This equipment generates, us...

Page 3 - Declaration of Conformity; Rex Lin

Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-7ZMMC is in conformity with (reference to...

Page 4 - ZMMC Motherboard; Table Of Content

7ZMMC Motherboard Table Of Content FEATURE SUMMARY ........................................................................................................................................ 1 7ZMMC MOTHERBOARD LAYOUT ........................................................................................

Page 5 - Feature Summary; speeds

7ZMMC Motherboard 1 Feature Summary Form Factor 24.4 cm x 22.2 cm Micro ATX size form factor, 4 layers PCB. CPU AMD Athlon TM /Duron TM (K7) Socket A Processor 256K/64K L2 cache on die Supports 600MHz ~ 1,2 GHz Chipset Pro Savage KM133, consisting of: VT8365 Memory/AGP/PCI Controller (PAC) VT82C686B...

Page 6 - ZMMC Motherboard Layout

7ZMMC Motherboard 2 7ZMMC Motherboard Layout 7ZMMC PCI1 PCI2 Socket A CPU VT82C 686B VT8365 G A M E & AU DIO VG A COM A LP T PS/2 BIOS J3 J8 J7 J9 BAT1 J2 F L OPPY ID E1 ID E2 AGP 1 JP6 SW 1 J11 LED1 J13 J12 JP4 US B1 JP8 CNR PCI3 CO D E C J18 USB2 D IMM1 D IMM2 JP7 J16 J17 A TX P O W E R JP3 JP...

Page 7 - CPU Speed Setup; O: ON, X: OFF; FSB; AMD CPU Heat Sink Installation:

7ZMMC Motherboard 3 CPU Speed Setup The system bus speed is selectable at 100MHz. The user can select the system bus speed by DIP switch SW1 . SW1: CPU Speed Setup SW1: O: ON, X: OFF FSB 1 2 3 4 95 O O X O 100 X O X X 102 0 0 X X 103 X O X O 107 O X O 0 110 0 X 0 X 113 X X O O 115 X X X 0 133 X X X ...

Page 8 - Connectors; ATX Power; Definition; Floppy Connector

Connectors 4 Connectors ATX Power Pin No. Definition 3,5,7,13, 15-17 GND 1,2,11 3.3V 4,6,19,20 VCC 10 +12V 12 -12V 18 -5V 8 Power Good 9 5V SB stand by+5V 14 PS-ON(Soft On/Off) 20 10 11 1 COM A / VGA / LPT Port COM A LPT Port VGA Floppy Connector Red Line FDD1 Game & Audio Port MIC In Game Port ...

Page 9 - Red Line

7ZMMC Motherboard 5 IDE1 (Primary), IDE2 (Secondary) Connector IDE 2 IDE 1 Red Line J2: Sysem Fan Pin No. Definition 1 Control 2 +12V 3 SENSE 1 J3: CPU Fan Pin No. Definition 1 Control 2 +12V 3 SENSE 1 J7: AUX_IN Pin No. Definition 1 AUX-L 2 GND 3 GND 4 AUX-R 1

Page 10 - J8 TEL: The connector is for Modem with internal voice connector; SB

Connectors 6 J8 TEL: The connector is for Modem with internal voice connector Pin No. Definition 1 Signal-In 2 GND 3 GND 4 Signal-Out 1 J9: CD Audio Line In Pin No. Definition 1 CD-L 2 GND 3 GND 4 CD-R 1 J12: Wake On LAN Pin No. Definition 1 +5V SB 2 GND 3 Signal 1 J13: Ring Power On (Internal Modem...

Page 11 - STR LED Connector External.

7ZMMC Motherboard 7 JP6: Power Fan Pin No. Definition 1 Control 2 +12V 3 NC 1 JP8 / LED1: STR LED Connector & DIMM LED STR LED Connector External. DIMM LED 1 + PS/2 Keyboard & PS/2 Mouse Port PS/2 Mouse/Keyboard Pin No. Definition 1 Data 2 NC 3 GND 4 VCC(+5V)5 Clock 6 NC PS/2 Keyboard PS/2 M...

Page 12 - USB 2: Front USB Connector

Connectors 8 USB 2: Front USB Connector 9 10 1 2 Pin No. Definition 1 +5V 2 GND 3 USB D2- 4 NC 5 USB D2+ 6 USB D3+ 7 NC 8 USB D3- 9 GND 10 +5V

Page 13 - Panel And Jumper Definition; CAUTION; Danger of explosion if battery

7ZMMC Motherboard 9 Panel And Jumper Definition BAT1: Battery + CAUTION ☞ Danger of explosion if battery is incorrectly replaced. ☞ Replace only with the same or equivalent type recommended by the manufacturer. ☞ Dispose of used batteries according to the manufacturer’s instructions. J11: 2x11 Pins ...

Page 14 - Panel and Jumper Definition; Communication and Networking Riser)

Panel and Jumper Definition 10 J16 /J17/J18: CNR (Primary or Secondary) Select [Optional] (CNR Communication and Networking Riser) J16 J17 J18 Onboard AC97 1-2 1-2 1-2 CNR (Primary) 2-3 3-4 3-4 Onboard AC97 CNR (Secondary) [Optional] 1-2 1-2 3-4 1-2 1 J16 1 J17 1 J18 JP3: Clear CMOS Function (Option...

Page 15 - JP7: STR Function Enable

7ZMMC Motherboard 11 JP7: STR Function Enable Pin No. Definition 1-2 close STR Enable 2-3 close Normal (Default) 1 JP9: BIOS Write Protect Function Pin No. Definition 1-2 close Write Protect Enable 2-3 close Write Protect Disable (Default) 1 Please set Jumper JP9 to “2-3 close” to enabled BIOS write...

Page 16 - Memory Installation; Install memory in any combination table:

7ZMMC Motherboard 12 Memory Installation The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memorytype and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can onlyfit in one direction due to the two notc...

Page 17 - BIOS Setup; Main Menu

7ZMMC Motherboard 13 BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basicsystem configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setupinformation when the power is turned off. ENTERING SET...

Page 18 - The Main Menu; This setup page includes all the items of Green function features.

BIOS Setup 14 The Main Menu Once you enter AMI BIOS CMOS Setup Utility, the Main Menu (Figure 1) will appear on the screen. The MainMenu allows you to select from nine setup functions and two exit choices. Use arrow keys to select among theitems and press <Enter> to accept or enter the sub-men...

Page 19 - User password; Standard CMOS Setup; Date

7ZMMC Motherboard 15 •••• User password Change, set, or disable password. It allows you to limit access to the system. •••• IDE HDD auto detection Automatically configure hard disk parameters. •••• Save & Exit Setup Save CMOS value settings to CMOS and exit setup. •••• Exit Without Saving Abando...

Page 21 - BIOS Features Setup; Figure 3: BIOS Features Setup; Floppy Drive Seek

7ZMMC Motherboard 17 BIOS Features Setup Figure 3: BIOS Features Setup •••• 1st / 2nd / 3rd Boot Device Floppy Boot Device by Floppy. ZIP A: / LS120 Boot Device by ZIP A: / LS120. CDROM Boot Device by CDROM. SCSI Boot Device by SCSI. NETWORK Boot Device by NETWORK. USB FDD Boot Device by USB FDD. ID...

Page 22 - Chipset Features Setup; Configure Time by SPD

BIOS Setup 18 Chipset Features Setup Figure 4: Chipset Features Setup •••• Configure Time by SPD Disabled Disable Configure Time by SPD function. Enabled Enable Configure Time by SPD function. (Default Value) •••• DRAM Frequency Auto Set DRAM Frequency to Auto. (Default Value) 100MHz Set DRAM Freque...

Page 23 - AGP Aperture Size

7ZMMC Motherboard 19 •••• AGP Aperture Size 4MB Set AGP Aperture Size to 4MB. 8MB Set AGP Aperture Size to 8 MB. 16MB Set AGP Aperture Size to 16 MB. 32MB Set AGP Aperture Size to 32 MB. 64MB Set AGP Aperture Size to 64 MB. (Default Value) 128MB Set AGP Aperture Size to 128 MB. 256MB Set AGP Apertur...

Page 24 - Power Management Setup; ACPI Standby State

BIOS Setup 20 Power Management Setup Figure 5: Power Management Setup •••• ACPI Standby State S1/POS Set ACPI Standby State to S1. (Default Value) S3/STR Set ACPI Standby State to S3. • USB Dev Wakeup From S3~S5 Enabled Enable USB Dev Wakeup from ACPI S3, S4 and S5 mode. Disabled Disable USB Dev Wak...

Page 25 - System after

7ZMMC Motherboard 21 • System after AC Back Last State System power on depends on the status before AC lost. (Default Value) Off Always in Off state when AC back. On Always power on the system when AC back. • Resume On Ring / LAN Disabled Disable Resume On Ring / LAN. Enabled Enable Resume On Ring /...

Page 26 - PNP/PCI Configurations; VGA Frame Buffer Size

BIOS Setup 22 PNP/PCI Configurations Figure 6: PNP/PCI Configuration •••• VGA Frame Buffer Size 8MB Set VGA Frame Buffer Size to 8MB. 16MB Set VGA Frame Buffer Size to 16MB. (Default Value) 32MB Set VGA Frame Buffer Size to 32MB. • VGA Boot From AGP Primary Graphics Adapter From AGP. PCI Primary Gra...

Page 27 - Figure 7: Load BIOS Defaults; Load BIOS Defaults

7ZMMC Motherboard 23 Load BIOS Defaults Figure 7: Load BIOS Defaults •••• Load BIOS Defaults BIOS defaults contain the most appropriate values of the system parameters that allow minimum systemperformance. AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24a ( C ) 1999 American Megatrends, Inc. All Rights Res...

Page 28 - Figure 8: Load Setup Defaults; Load Setup Defaults

BIOS Setup 24 Load Setup Defaults Figure 8: Load Setup Defaults •••• Load Setup Defaults Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automaticallydetects. AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24a ( C ) 1999 American Megatrends, Inc. All Rights Res...

Page 29 - Integrated Peripherals; Onboard FDC

7ZMMC Motherboard 25 Integrated Peripherals Figure 9: Integrated Peripherals •••• Onboard FDC Auto Auto detect OnBoard Floppy disk controller. (Default value) Enabled Enable OnBoard Floppy disk controller. Disabled Disable OnBoard Floppy disk controller. • On Board Serial Port 1 Auto BIOS will autom...

Page 30 - Parallel Port IRQ

BIOS Setup 26 •••• Parallel Port IRQ 7 Set Parallel Port IRQ to 7. Auto Set Auto to parallel Port IRQ DMA Channel. (Default Value) 5 Set Parallel Port IRQ to 5. • OnBoard IDE Disabled Disable OnBoard IDE. Both Set OnBoard IDE to Both. (Default Value) Primary Set OnBoard IDE to Primary. Secondary Set...

Page 31 - Hardware Monitor; CPU Fan Speed

7ZMMC Motherboard 27 Hardware Monitor Figure 10: Hardware Monitor •••• CPU Temperature. ( °°°° C / °°°° F) Detect CPU Temperature automatically. •••• System Temperature. ( °°°° C / °°°° F) Detect System Temperature automatically. •••• CPU Fan Speed Detect CPU Fan speed status automatically. •••• Sys...

Page 32 - Set Supervisor / User Password; Enter new supervisor password:

BIOS Setup 28 Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you increating a password. Figure 11: Password Setting Type the password, up to six characters, and press <Enter>. You will be asked to confirm th...

Page 33 - IDE HDD AUTO Detection; Figure 12: IDE HDD Auto Detection

7ZMMC Motherboard 29 IDE HDD AUTO Detection Figure 12: IDE HDD Auto Detection Type "Y" will accept the H.D.D. parameter reported by BIOS. Type "N" will keep the old H.D.D. parameter setup. If the hard disk cylinder number is over 1024, then the usercan select LBA mode or LARGER mode ...

Page 35 - Exit Without Saving; Figure 14: Exit Without Saving

7ZMMC Motherboard 31 Exit Without Saving Figure 14: Exit Without Saving Type "Y" will quit the Setup Utility without saving to RTC CMOS. Type "N" will return to Setup Utility. AMIBIOS SIMPLE SETUP UTILITY-VERSION 1.24a ( C ) 1999 American Megatrends, Inc. All Rights Reserved STANDARD...