Page 3 - The environmental policy of ALTO
3 IMPORTANT: Read this instruction manualbefore you start up your high pressure washerfor the first time. This machine is a high pressure washer produc- ing a water jet under high pressure which is whysevere injuries can occur if the safety precautionsare not observed. Therefore a complete understan...
Page 4 - US; Model
4 1.1 Model tag This ALTO high pressure washing system has the serial designation C3KSA. The system is available withone and two pumps respectively. The designation appears from the text on the cabinet, ALTO 52C3KSA-2 as an example, and the model tag (pos. 9) on the right side of the machine. The ta...
Page 5 - Safety precautions and warnings; IMPORTANT SAFETY INSTRUCTIONS
5 2.0 Instructions for use Safety precautions and warnings US Before starting your high pressure washer for the first time, we advise you to read through the followingsections: 2.0 Instructions for use and 3.0 Operating instructions and to follow all instructions to ensure the protection of user, su...
Page 6 - SAVE THESE INSTRUCTIONS; GROUNDING INSTRUCTIONS
6 Safety precautions and warnings US z For safety reasons only use original ALTO accessories and spare parts. Otherwise the machine couldbe damaged. z In freezing conditions, never start the machine until it, and the hoses and accessories have thawed. z The machine should not be covered during opera...
Page 8 - Mains power connection; High pressure connection
8 3.0 Installation US 3.1 Water connection Flexible hose connectionMax. water pressure 218 psiMax. 160°F Inlet water shutoff cock requiredClean water inlet screen (1) at monthlyintervals The water connection is made through a flexible hose connected to the quick coupling on the water inlet(1) of the...
Page 9 - Start; Installation
9 O Start 1 Installation US 3.4 Venting KSA-1 Turn to position „Start“Activate spray handle/open outlet point In the case of newly installed systems, or if the pipeline and the pump have been drained in any otherway, the system should be vented by starting the pump and then let the water run freely ...
Page 10 - High pressure hose - directly on the machine
10 4.0 Operating instructions US 4.1 Connections 1. High pressure hose - directly on the machine Max. length of extension hose: 160 ft.Only use ALTO high pressure hose Danger of scalding! Never dismount high pressure hoses atwater temperatures above 120°F The high pressure hose with imprinted max. w...
Page 11 - Operating instructions; Detergents
11 Operating instructions US 4. Detergents If you want to apply detergents or disinfectants these can be metered through an accessory injector.Below you will find various types of outlet points with injectors. Outlet point with detachable injector To be attached to the quick coupling of the high pre...
Page 13 - High pressure mode; Regulation of pressure/water volume; MULTIPRESSURE
13 Operating instructions US 4.4 Double spray lance, regulation of pressure and water volume - KSA-1 Turn spray lance pressure reducing valve(1): Clockwise (B): high pressure Counter clockwise (A): low pressure/detergent application The spray lance employs a high pressure nozzle and a low pressure n...
Page 15 - Fields of application
15 5.0 Applications and working methods US 5.1 Fields of application The most important fields of application for this product are: Agriculture Cleaning machinery, agricultural implements, stalls, equipment, and buildings Transport Cleaning trucks, buses, cars etc. Building and construction Cleaning...
Page 16 - Applications and working methods; General rules for addition of detergents
16 Applications and working methods US General rules for addition of detergents ALTO cleaning equipment can be used for all detergents and disinfectants, which are suitable for highpressure cleaning according to the supplier. (The pH-value should be between 4 and 14). Acid and lyeshould not be appli...
Page 17 - PROTECT THE ENVIRONMENT; Inlet water screen
17 6.0 Maintenance US A minimum of maintenance ensures prolonged and problem-free operation. It’s a good idea to make ahabit of the following: Prior to attaching the water hose and the high pressure hose, the quick couplings should be rinsed toremove dirt. Prior to attaching the spray lance or other...