Alliance AWNE82SP113TW01 - Manuals

Page 3 - Table of Contents; Dimensions and Specifications

Table of Contents Dimensions and Specifications ............................................................... 4 Installation ............................................................................................. 5 Before You Start ...............................................................

Page 5 - Before You Start; Supplies; Figure 1; Parts Included; Remove the Shipping Brace and Ship-; Figure 2

Installation Before You Start Supplies For most installations, the basic supplies you will need are: TLW2218N_SVG 3 4 5 6 7 2 1 1. Safety Glasses 2. Wood Block 3. Gloves 4. Wrench 5. Screwdriver 6. Pliers 7. Level Figure 1 NOTE: If the washer is delivered on a cold day (belowfreezing), or is stored ...

Page 6 - Wipe Out Inside of Washtub; Figure 3; Connect Fill Hoses; Mixing Valve Flow Rates; Water Supply Requirements; WARNING

TLW1975N_SVG 2 1 3 1. Shipping Brace 2. Shipping Plug 3. Cardboard Base Figure 2 Wipe Out Inside of Washtub Prior to first wash, use an all purpose cleaner or a detergentand water solution and a damp cloth to remove shipping dustfrom inside of washtub. TLW2009N_SVG Figure 3 Connect Fill Hoses WARNIN...

Page 7 - Connecting Hoses; Figure; Figure 4; Connect Drain Hose to Drain Recepta-; Standpipe Installation

NOTE: Water pressure under 20 pounds per squareinch [138 kPa] will cause an extended fill time in thewasher. Turn on the water supply faucets and flush the lines for approxi-mately two minutes to remove any foreign materials that couldclog the screens in the water mixing valve. This is especially im...

Page 8 - Low Standpipe Installation; Figure 6; Wall Installation; Figure 7; Laundry Tub Installation

IMPORTANT: To prevent siphoning, do not placeany ribbed portion of the drain hose into the stand-pipe. 3. Remove the beaded strap from accessories bag and place around standpipe and drain hose, approximately 12 inches[300 mm] down from the top of pipe. Refer to Figure 5 . 4. Tighten strap to hold ho...

Page 9 - Position and Level the Washer; Figure 9; Plug In the Washer; Electrical Requirements

fer to Figure 8 . Use the beaded strap (supplied in accessories bag) to secure hose. We recommend leaving the standpipe adapter on the drain hosefor this type of installation. TLW2222N_SVG 1 1. Beaded Strap (tape if necessary) Figure 8 Position and Level the Washer 1. Position washer so it has suffi...

Page 10 - Earth/Ground Instructions

WARNING To reduce the risk of fire, electric shock, serious in-jury or death, all wiring and protective earth/groundconnections MUST conform with the latest edition ofthe National Electrical Code, ANSI/NFPA No. 70, andsuch local regulations as might apply. It is the cus-tomer’s responsibility to hav...

Page 11 - • DO NOT modify the plug provided with the unit – if it will; Add Water to the Washer; Refer to Installer Checklist on the back cover of this manual

led and connected to a protective earth/ground in accordance withall local codes and ordinances. WARNING Improper connection of the equipment earth/groundconductor can result in a risk of electric shock.Check with a qualified electrician or service person ifyou are in doubt as to whether the unit is...

Page 12 - Fast Track for Installing the Washer; Refer to the manual for more detailed information

Installer Checklist Fast Track for Installing the Washer 1 Remove the ShippingBrace and ShippingPlug. TLW1975N_SVG1 5 Position and Level theWasher. TLW2201N_SVG CHECK CHECK 2 Wipe Out Inside ofWashtub. TLW2009N_SVG 6 Plug In the Washer. D254I_SVG CHECK CHECK 3 Connect Fill Hoses. TLW1988N_SVG HOT CO...

Alliance AWNE82SP113TW01 - Manuals

Manuals:

User Manual Alliance AWNE82SP113TW01

Installation Manual Alliance AWNE82SP113TW01

Summary

Alliance Manuals