Alliance 9001889R7 - Manuals

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001889 4 Programming Setup of the Machine Turn key from Run to Program To go to the main setup of the machine, press “Auxiliary”, “2”, “9”. To change the machine type, press the “Advance” button. The following types are possible: _...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 7 9001889 Version of Control To determine control version, apply power to machine. Control will display version of control (i.e., 1.15). Language on Display (Version 1.15 and later ONLY) To set a different language on th...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 9001889 8 Explanation of the Step Functions Fill: Choose between 4 water inlet configurations and 3 water levels.Water Inlet Configurations: Cold: Only opens the cold water valve. Hot: Only opens the hot water valve. War...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 9001889 10 Wash: Choose between 7 different preset wash actions. The “Wash” button is button 4 on the display.Example: Wash 4 for 8 minutes 00 seconds. * Refer to section on Wash 5 Thermal Cool-Down. Supply: Choose betwe...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 11 9001889 Chemical Hold Feature Chemical supply injection can be paused. Refer to Setup of Chemical Hold Feature. Wash 5 Thermal Cool-Down Immediately after a heat step, a temperature-controlled thermal cool-down may be...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 13 9001889 Spin: Choose between 4 preset spin speeds. “Spin” is button 9. Drain: This function drains the water.If you have 2 drains, select which drain has to be opened. NOTE: With the WE-8 control, it is NOT necessary ...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 9001889 14 Example Making a New Program Program 51 Step 1: Fill warm water to low level (5 minutes 30 seconds time limit) Step 2: Supply 1 and 5 for 20 secondsStep 3: Heat up to 140°F (45 minutes time limit)Step 4: Wash ...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 9001889 18 Edit a Cycle Change a Complete Step To edit a cycle enter the cycle number (example: cycle 51). Press the “Edit Cycle” button. Press the “Enter” button to edit the cycle. Press “Enter” to continue. The first s...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 19 9001889 The control is then in the next step of cycle 51. Press “Advance” until the display shows “End Cycle 55”. Press “Enter” to confirm. Press “Enter” to save or “Stop” to ignore the changes. Step 02 Cycle 51Soak S...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 9001889 20 Changing the Time of a Step To edit a cycle, enter the cycle number (example: cycle 51). Press the “Edit Cycle” button. Press the “Enter” button to edit the cycle. Press “Enter” to continue.The first step of c...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 21 9001889 Press “Enter” to go to the next step. Press the “Advance” button until display shows “End Cycle 51”. Press “Enter” to confirm. Press “Enter” to save or “Stop” to ignore the changes. Step 02 Cycle 516 min 00 se...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 9001889 22 Delete a Step To edit a cycle, enter the cycle number (example: cycle 51). Press the “Edit Cycle” button. Press the “Enter” button to edit the cycle. Press “Enter” to continue.The first step of cycle 51 will d...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 23 9001889 Insert a Step To edit a cycle, enter the cycle number (example: cycle 51). Press the “Edit Cycle” button. Press the “Enter” button to edit the cycle. Press “Enter” to continue.The first step of cycle 51 will d...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 25 9001889 Delete a Cycle Press the “Erase Cycle” button. Press the number of the cycle being erased (example: 55). Press “Enter” to confirm. Press “Enter” to save or “Stop” to ignore the changes. Program Cycle 00 Erase ...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 9001889 26 Reloading Previous Settings This special function allows previous settings to be restored. Press “Auxiliary”, “3”, “0”. The control will ask if earlier settings are desired. Press “Enter” to confirm the settin...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 27 9001889 Cycle Count Reading Cycle Count 1. Enter Program Mode by turning key to PROGRAM position (xx represents a cycle number from 00 to 99). 2. Press “Auxiliary” key, then “3” key, then “1” key. 3. The total hours o...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 9001889 28 Calibration of the Machine The _x_ _PV should reflect the size selected in earlier steps. Turn key to Program Mode. Press “Auxiliary”, “3”, “1”. The total hours the machine was running will be displayed.Press ...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming 29 9001889 Speed Calibration This function automatically calibrates water level, distribution speed and spin speed. Total workinghours : # Total Cycle:# Calibrationand testing level: 0.0"Enter to zero If shell is emp...

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001889 56 Inverter Drive Error Codes Operation Panel Indication Name Description and NOTES Check point Corrective action Overcurrent shut-off during acceleration When the inverter output current reaches or exceeds approximately 200...