Alliance 120- Manuals

Page 2 - Table of; 20 Pound Tumbler Dimensions and

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT © Published by permission of the copyright owner.All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. 4-08-45 ...

Page 3 - Introduction; Model Identification; Includes models with the following control suffixes; Gas; RD – reversing DMP OPL

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 2 4-08-45 Tumblers – 120 and 170 Introduction Model Identification Includes models with the following control suffixes : TMB1268C TMB1268C Gas Steam/Thermal Oil 120 Pound IPD120G2-IT120L IPD120G2-IT120N IPD120S2-IT120S IPD120S2-IT12...

Page 5 - Specifications and Dimensions; Specifications

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 4 4-08-45 Specifications and Dimensions N/A = Not Applicable Specifications 120 Pound 170 Pound Noise level measured during operation at operator position of 3.3 feet (1 meter) in front of machine and 5.2 feet...

Page 6 - Refer to; Cabinet Dimensions

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 4-08-45 5 120 Pound Tumbler Dimensions and Exhaust Outlet Locations Refer to Position and Level the Tumbler to temporarily reduce the heights of these models. TMB2333N TMB2333N A B C D U V X H F Z Y I W TOP VI...

Page 8 - NOTE: These figures are approximate dimensions only.; Models

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 4-08-45 7 Electric and Gas Connection Locations for Gas Models NOTE: These figures are approximate dimensions only. TMB1301N A C C A B D B D 120L/N 170L/N Models Electrical Connection Gas Connection A B C D Di...

Page 10 - Installation; Pre-Installation Inspection

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 4-08-45 9 Installation Pre-Installation Inspection Upon delivery, visually inspect the crate, carton and parts for any visible shipping damage. If the crate, carton, or cover is damaged or signs of possible da...

Page 11 - Tumbler Enclosure; Figure 1; WARNING; construction must conform to the minimum clearances.

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 10 4-08-45 Tumbler Enclosure Figure 1 TMB2020N NOTE: Shaded areas indicate adjacent structure. 1 0.5 in. (13 mm) recommended between machines for removal or installation. 2 Allow 2-4 in. (51-102 mm) opening at...

Page 12 - Exhaust Requirements; Layout; Table 1; Venting; Required Make-Up Air Opening; free air

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 4-08-45 11 Exhaust Requirements Layout Whenever possible, install tumblers along an outside wall where duct length can be kept to a minimum, and make-up air can be easily accessed. Elbows and long vents tend t...

Page 13 - Figure 2; Individual Venting; Duct; Table 2

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 12 4-08-45 NOTE: Exhaust ducts must be constructed of sheet metal or other noncombustible material. Such ducts must be equivalent in strength and corrosion resistance to ducts made of galvanized sheet steel no...

Page 14 - Consult your local building code for regulations which

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 4-08-45 13 Figure 2 NOTE: Do not install wire mesh or screen in exhaust duct opening to avoid lint build-up or impacting proper discharge of air from tumblers. NOTE: Where exhaust duct pierces a combustible wa...

Page 15 - Manifold Venting; Figure 4; Figure 3

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 14 4-08-45 Manifold Venting While it is preferable to exhaust tumblers individually to the outdoors, a main collector duct may be used if it is sized according to Figure 4 and Figure 5 . This illustration indi...

Page 16 - ONE MANIFOLD ASSEMBLY; Table 3

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 4-08-45 15 Figure 4 TMB2019N 1 NOTE: Where the exhaust duct pierces a combustible wall or ceiling, the opening MUST be sized per local codes. 2 Outlet Duct Diameter 3 45° Typical L K J I H G F E D C B A 3 1 2 ...

Page 17 - Figure 5; TWO MANIFOLD ASSEMBLIES; Table 4

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 16 4-08-45 Figure 5 TMB2018N 1 NOTE: Where the exhaust duct pierces a combustible wall or ceiling, the opening MUST be sized per local codes. 2 Outlet Duct Diameter 3 45° Typical TMB2018N 1 2 3 L K J I L K J I...

Page 18 - Electrical Requirements; For 120 Pound Tumbler Models; Table 5

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Tumblers – 120 and 170 4-08-45 17 Electrical Requirements Refer to Table 5 . NOTE: Minimum wire sizes are obtained from Canadian Electrical Code and are intended for use as a guideline only. Electrical connections should be made onl...

Manuals:

User Manual Alliance 120

Summary

Alliance Manuals