Page 3 - Alamo Industrial; Watch; trial
In order to reduce accidents and enhance the safe operation of mowers, Alamo Industrial, in cooperation with other industry manufacturers has developed the AEM/FEMA Industrial and Agricultural MowerSafety Practices video and guide book. The video will familiarize and instruct mower-tractor operators...
Page 4 - Alamo Industrial Division is willing to provide
Alamo Industrial Division is willing to provide one (1) AEM Mower Safety Practices Video Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety Video DVD Format – AEM/FEMA Mower Operator Safety Video Mower Operator’s Manual AEM Mower Operator’s Safety Manual Requester Name Phone: Requester Addr...
Page 5 - TABLE OF CONTENTS
TABLE OF CONTENTS SAFETY SECTION ........................................................................................ 1-1 General Safety Instructions and Practices ........................................................................................................ 1-2Decal Location ............
Page 7 - SAFETY SECTION
Safety Section 1-1 © 2006 Alamo Group Inc. SAFETY SECTION
Page 8 - General Safety Instructions and Practices
SAFETY UGR 04/06 Safety Section 1-2 © 2006 Alamo Group Inc. SAFETY General Safety Instructions and Practices A safe and careful operator is the best operator. Safety is of primary importance to the manufacturer and should be to the owner/operator. Most accidents can be avoided by being aware of your...
Page 18 - Decal Location
SAFETY UGR 04/06 Safety Section 1-12 © 2006 Alamo Group Inc. SAFETY Decal Location NOTE: Alamo Industrial supplies safety decals on this product to promote safe operation. Damage to the decals may occur while in shipping, use, or reconditioning. Alamo Industrial cares about the safety of its custome...
Page 25 - Federal Laws and Regulations
SAFETY UGR 04/06 Safety Section 1-19 © 2006 Alamo Group Inc. SAFETY Federal Laws and Regulations This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal int...
Page 71 - INTRODUCTION SECTION
Introduction Section 2-1 © 2006 Alamo Group Inc. INTRODUCTION SECTION
Page 72 - INTRODUCTION
INTRODUCTION UGR 04/06 Introduction Section 2-2 © 2006 Alamo Group Inc. INTRODUCTION This Under the Guardrail is designed with care and built with quality materials by skilled workers. Proper assembly, maintenance, and operating practices, as described in this manual, will help the owner/operator ge...
Page 74 - ATTENTION OWNER/OPERATOR
INTRODUCTION UGR 04/06 Introduction Section 2-4 © 2006 Alamo Group Inc. INTRODUCTION ATTENTION OWNER/OPERATOR BEFORE OPERATING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely understand the Safety Messages and instructions, and know how to operate correctly both the tractor and imp...
Page 75 - ASSEMBLY SECTION
Assembly Section 3-1 © 2006 Alamo Group Inc. ASSEMBLY SECTION
Page 76 - RECEIVING INSTRUCTIONS; MOUNTING ON BARE TRACTOR
ASSEMBLY UGR 04/06 Assembly Section 3-2 © 2006 Alamo Group Inc. ASSEMBL Y RECEIVING INSTRUCTIONS Your Mower has been partially pre-assembled and adjusted at the factory. The complete unit consists of 4 assemblies. (1.) Under the Guardrail Mower Assembly complete with blades and carriage arm. (2.) Co...
Page 79 - CONTROL CABLE CONNECTION TO CONTROL STICK ASSEMBLIES
ASSEMBLY UGR 04/06 Assembly Section 3-5 © 2006 Alamo Group Inc. ASSEMBL Y 14. Adjust carriage bolt item 1 to obtain a com- pression at impact point of 1/8”-3/16” before STOP “S” hits the arm. Adjust return spring tension (Item 2) to obtain desired mower head return speed. 15. The Mower is now ready ...
Page 81 - OPERATION SECTION
Operation Section 4-1 © 2006 Alamo Group Inc. OPERATION SECTION
Page 82 - OPERATION; OPERA; ALAMO INDUSTRIAL UNDER THE GUARDRAIL MOWER
OPERATION UGR 04/06 Operation Section 4-2 © 2006 Alamo Group Inc. OPERA T ION ALAMO INDUSTRIAL UNDER THE GUARDRAIL MOWER OPERATING INSTRUCTIONS ALAMO INDUSTRIAL Under the Guardrail mowers are manufactured with quality materials by skilled workers.These mowers are designed for cutting grass and small...
Page 83 - OPERATOR REQUIREMENTS
OPERATION UGR 04/06 Operation Section 4-3 © 2006 Alamo Group Inc. OPERA T ION 1.OPERATOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualified operator. A qualified operator has read andunderstands the implement and tractor Operator’s Manuals and is experienced in implement an...
Page 84 - TRACTOR REQUIREMENTS; Tractor Requirements and Capabilities
OPERATION UGR 04/06 Operation Section 4-4 © 2006 Alamo Group Inc. OPERA T ION 2.TRACTOR REQUIREMENTS The tractor used to operate the mower must have the power capacity to lift, pull, and operate the Power TakeOff (PTO) at the mower’s rated speed while traveling at a ground speed between 2 and 5 MPH....
Page 85 - Tractor Hydraulics; GETTING ON AND OFF THE TRACTOR; Boarding the Tractor
OPERATION UGR 04/06 Operation Section 4-5 © 2006 Alamo Group Inc. OPERA T ION 2.4 Tractor Hydraulics The mower is positioned and lowered with 2 hydraulic cylinders, 90º above horizontal to 75º below horizontaland 2” below grade to 12” above grade. The Hydraulic circuit supplies full system flow, and...
Page 86 - Dismounting the Tractor
OPERATION UGR 04/06 Operation Section 4-6 © 2006 Alamo Group Inc. OPERA T ION Never allow children or other persons to ride on the Tractor or Implement.Falling off can result in serious injury or death. (SG-10) Do not mount the Tractor while the tractor is moving. Mount the Tractoronly when the Trac...
Page 87 - STARTING THE TRACTOR
OPERATION UGR 04/06 Operation Section 4-7 © 2006 Alamo Group Inc. OPERA T ION 4.STARTING THE TRACTOR The operator must have a complete understanding of the placement, function, and operational use of alltractor controls before starting the tractor. Review the tractor operator’s manual and consult an...
Page 90 - DRIVING THE TRACTOR AND IMPLEMENT
OPERATION UGR 04/06 Operation Section 4-10 © 2006 Alamo Group Inc. OPERA T ION DRIVING THE TRACTOR AND IMPLEMENT Safe tractor transport requires the operator possess a thorough knowledge of the model being operated and precautions to take while driving with an attached implement. Ensure the tractor ...
Page 91 - Starting the Tractor
OPERATION UGR 04/06 Operation Section 4-11 © 2006 Alamo Group Inc. OPERA T ION Transport only at safe speeds. Serious accidents and injuries can resultfrom operating this equipment at unsafe speeds. Understand the Tractorand Implement and how it handles before transporting on streets and highways. M...
Page 92 - Brake and Differential Lock Setting
OPERATION UGR 04/06 Operation Section 4-12 © 2006 Alamo Group Inc. OPERA T ION Never run the Tractor engine in a closed building or without adequate ventilation. Theexhaust fumes can be hazardous to your health. (SG-23) 5.3 Brake and Differential Lock Setting Make sure the tractor brakes are in good...
Page 93 - Tractor PRE-OPERATION Inspection
OPERATION UGR 04/06 Operation Section 4-13 © 2006 Alamo Group Inc. OPERA T ION Tractor PRE-OPERATION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift ____________________ Before conducting the inspection, make sure the tractor engine is off,all rotation has...
Page 94 - Rotary Mower PRE-OPERATION Inspection
OPERATION UGR 04/06 Operation Section 4-14 © 2006 Alamo Group Inc. OPERA T ION Rotary Mower PRE-OPERATION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift ____________________ Before conducting the inspection, make sure the tractor engine is off,all rotatio...
Page 95 - OPERATING THE TRACTOR AND IMPLEMENT
OPERATION UGR 04/06 Operation Section 4-15 © 2006 Alamo Group Inc. OPERA T ION 6.OPERATING THE TRACTOR AND IMPLEMENT THE OPERATOR MUST COMPLETELY UNDERSTAND HOW TO OPERATE THE TRACTOR ANDIMPLEMENT AND ALL CONTROLS BEFORE ATTEMPTING TO OPERATE. The operator must read and understand the Safety and Ope...
Page 96 - Position Controls
OPERATION UGR 04/06 Operation Section 4-16 © 2006 Alamo Group Inc. OPERA T ION 6.1 Position Controls All operating positions of the mower are controlledwith two control valve levers. The 'lift' function controlpermits selection of Up, Lock, or Down position andthe 'tilt' control may be placed in one...
Page 97 - Tractor Mowing Speed
OPERATION UGR 04/06 Operation Section 4-17 © 2006 Alamo Group Inc. OPERA T ION 6.4 Tractor Mowing Speed The best mowing speeds are usualy between 1-3 MPH. Conditions will vary with the material being cut andthe terrain, but select a speed producing the desired result and maintain that speed. If too ...
Page 98 - TRANSPORTING THE TRACTOR AND IMPLEMENT; Transporting on Public Roadways
OPERATION UGR 04/06 Operation Section 4-18 © 2006 Alamo Group Inc. OPERA T ION Never allow children to play on or around Tractor or Implement. Children can slip or fall offthe Equipment and be injured or killed. Children can cause the Implement to shift or fallcrushing themselves or others. (SG-25) ...
Page 100 - Hauling the Tractor and Implement
OPERATION UGR 04/06 Operation Section 4-20 © 2006 Alamo Group Inc. OPERA T ION 7.2 Hauling the Tractor and Implement Before transporting a loaded tractor and implement,measure the height and width dimensions and grossweight of the complete loaded unit. Ensure that theload will be in compliance with ...
Page 103 - MAINTENANCE SECTION
Maintenance Section 5-1 © 2006 Alamo Group Inc. MAINTENANCE SECTION
Page 104 - MAINTENANCE; LUBRICATION INFORMATION
MAINTENANCE UGR 04/06 Maintenance Section 5-2 © 2006 Alamo Group Inc. MAINTENANCE LUBRICATION INFORMATION For continued good cutting and trouble-free operation, it is important to follow these instructions accurately. Shut off the tractor engine and remove key before lubricating the mower. Greasing:...
Page 105 - INITIAL HYDRAULIC SYSTEM CLEANING
MAINTENANCE UGR 04/06 Maintenance Section 5-3 © 2006 Alamo Group Inc. MAINTENANCE INITIAL HYDRAULIC SYSTEM CLEANING After the first 200 hours of operation, or if the filter condition gauge shows in the red area when the oil is above 100°F drain, clean and replace the oil and filter in the following ...
Page 107 - HYDRAULIC SYSTEM; VALVES
MAINTENANCE UGR 04/06 Maintenance Section 5-5 © 2006 Alamo Group Inc. MAINTENANCE HYDRAULIC SYSTEM PUMP & MOTOR The pump and motor is the heart of the hydraulic circuit and is vital to the performance of all Triumph mowers. Worn pumps and motors should be replaced or repaired. It is recommended ...
Page 108 - ALAMO INDUSTRIAL; An Alamo Group Company
ALAMO-INDUSTRIAL LIMITED WARRANTY 1. LIMITED WARRANTIES 1.01. Alamo Industrial warrants for one year from the purchase date to the original non-commercial, governmental, or municipalpurchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser 1.02. Manufactu...
