Advantech FPM-8192V/8232V - Manuals

Advantech FPM-8192V/8232V – Manual in PDF format online.

Manuals:

Manual

Manual Advantech FPM-8192V/8232V

Summary

Page 2 - Copyright

FPM-8192V/8232V User Manual ii Copyright The documentation and the software included with this product are copyrighted 2008by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the rightto make improvements in the products described in this manual at any time withoutnotice. No...

Page 3 - Declaration of Conformity

iii FPM-8192V/8232V User Manual Declaration of Conformity CE This product has passed the CE test for environmental specifications when shieldedcables are used for external wiring. We recommend the use of shielded cables. Thiskind of cable is available from Advantech. Please contact your local suppli...

Page 4 - Technical Support and Assistance; Warnings, Cautions and Notes

FPM-8192V/8232V User Manual iv Technical Support and Assistance 1. Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. 2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if...

Page 5 - Safety Instructions

v FPM-8192V/8232V User Manual Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment...

Page 7 - Chapter

vii FPM-8192V/8232V User Manual Chapter 1 General Information ............................1 1.1 Introduction ............................................................................................... 21.1.1 Features ..................................................................................

Page 8 - Appendix C

FPM-8192V/8232V User Manual viii B.2 Troubleshooting ...................................................................................... 30 Appendix C Supported Modes .............................. 31 C.1 Graphics.......................................................................................

Page 9 - General Information

Page 10 - Introduction; Features; Full-range durable displays

FPM-8192V/8232V User Manual 2 1.1 Introduction The Marine Bridge System Displays are an extraordinary display design with sunlightreadable high quality panel, dimming brightness, ease of use OSD front panel con-trol, IP65 proof, multi-scan video function, high quality touchscreen, wide voltagerange ...

Page 11 - Basic Construction of Marine Bridge System Display

3 FPM-8192V/8232V User Manual Chapter 1 G eneral Information IP65 OSD Front Panel Design With IP65 water-dust front bezel proof, the Marine Bridge System Displays use easyto use front panel OSD control. It’s very convenience and intelligent design for allmaritime users. Anti-Shock and Vibration Base...

Page 13 - SecureTouch Surface Wave Touchscreen (Optional 2)

5 FPM-8192V/8232V User Manual Chapter 1 G eneral Information 1.2.2 SecureTouch Surface Wave Touchscreen (Optional 2) Introduction to SAW Touchscreen The surface wave is the optical standard of touch. Its pure glass construction pro-vides superior optical performance and makes it the most scratch-res...

Page 15 - Installation

Page 16 - General Installation

FPM-8192V/8232V User Manual 8 2.1 General Installation The Marine Bridge System Display can be applied for several different installationmethods. Including panel (flush) mounting, bracket mounting, ceiling / wall mount-ing…etc. For panel (flush) mounting is normally for a ship’s wheelhouse use, it’s...

Page 19 - Installation Notice; Brightness Control Knob Precaution

11 FPM-8192V/8232V User Manual Chapter 2 Installation 2.2 Installation Notice 2.2.1 Brightness Control Knob Precaution The dimming brightness control knob may be damaged by wrong placement. Pleasemake sure the right way to protect the knob. 2.2.2 Cable Connection Precaution Make sure to use qualifie...

Page 22 - OSD User Controls; AUTO

FPM-8192V/8232V User Manual 14 3.1 OSD User Controls The compact OSD in front control is a user-friendly interface both to remote the dis-play function and dimming VR knob. The on screen display (OSD) contains severalfunctions that will let the user to adjust or set up the display to their preferred...

Page 23 - Auto Adjustment Function

15 FPM-8192V/8232V User Manual Chapter 3 O perating theLCDDisplay 3.2 PIP (Picture in Picture) Function When OSD Menu is disabled, it cycles through the available PIP display modes.Repeated keystrokes will change the size of the PIP display to side-by-side (PAP)display, and then back to normal displ...

Page 25 - Display Item Menu

17 FPM-8192V/8232V User Manual Chapter 3 O perating theLCDDisplay 3.6 Display Item Menu Figure 3.3 Display Item Menu Display Item MenuMenu Input Source Description and Usage Brightness VGA DVI Composite S-Video Adjust brightness only used in brightness knob. Adjustment is no response here. Contrast ...

Page 26 - Image Item Menu

FPM-8192V/8232V User Manual 18 3.7 Image Item Menu Figure 3.4 Image Item Menu (VGA) Figure 3.5 Image Item Menu (DVI)

Page 28 - Position Item Menu

FPM-8192V/8232V User Manual 20 3.7.1 Position Item Menu Figure 3.7 Position Item Menu (VGA) Figure 3.8 Position Item Menu (DVI, Composite, S-Video) Note! For Scaling:1. In 1:1 mode, the input image is centered on the screen. In Fill mode, the input image is stretched / compressed to fill the availab...

Page 29 - Color Item Menu

21 FPM-8192V/8232V User Manual Chapter 3 O perating theLCDDisplay 3.7.2 Color Item Menu Figure 3.9 Color Item Menu (VGA) Position Item MenuMenu Input Source Description and Usage Zoom VGA DVI Composite S-Video Change the current Zoom setting only to the Main Display, using “ ” / “ ” to select either...

Page 31 - PIP Control Item Menu

23 FPM-8192V/8232V User Manual Chapter 3 O perating theLCDDisplay 3.7.3 PIP Control Item Menu Figure 3.11 PIP Control Item Menu PIP Control Item MenuMenu Input Source Description and Usage Mode VGA DVI Composite S-Video Use “ ” / “ ” to change the Mode value to be Off, Single, or PAP** . In Off mode...

Page 32 - Main Display Item Menu; PIP Display Item Menu

FPM-8192V/8232V User Manual 24 3.7.4 Main Display Item Menu Figure 3.12 Main Display Item Menu Press “ ” and “ ” to select the Main Display main source, including VGA, DVI, Composite, and S-Video mode. Press “ ” to choose “Select”. 3.7.5 PIP Display Item Menu Figure 3.13 PIP Display Item Menu

Page 34 - Reset Item Menu

FPM-8192V/8232V User Manual 26 3.7.7 Reset Item Menu Figure 3.15 Reset Item Menu Factory Reset Item MenuMenu Input Source Description and Usage Factory Reset VGA DVI Composite S-Video To reset all settings to factory defaults, open the Factory Reset Item. Use “ ” / “ ” to select the “ Yes ” option, ...

Page 35 - Appendix; Cleaning the Monitor

Page 37 - Troubleshooting

Page 39 - Supported Modes

Page 45 - Transflective Brightness Testing; Dark Room Testing Instructions

37 FPM-8192V/8232V User Manual Appendix E T ransflective Display (Optional) E.3 Transflective Brightness Testing E.3.1 Dark Room Testing Instructions 1. Put the panel on table and plug the inverter, adjust the screen to white color background. 2. Open the brightness testing equipment and make the ze...

Page 46 - Environment: Outdoor Readability Measure; Caution on Handling Transflective LCD; Operation & Storage Temperature Caution

FPM-8192V/8232V User Manual 38 E.3.2 Environment: Outdoor Readability Measure The following tables are our samples for outdoor readability measure. 8.4” R08T200-T1TR, 800x600@60Hz, 75Hz 10.4” R10L600-P1TR, 800x600@60Hz, 75Hz 15” R15T600-A1TR, 1024x768@60Hz, 75Hz E.4 Caution on Handling Transflective...

Page 47 - Touchscreen Selection

39 FPM-8192V/8232V User Manual Appendix E T ransflective Display (Optional) E.5 Touchscreen Selection Due to using pure glass instead of the coating, ELO SAW and IR touch are idealselection for touch solution on transflective LCD, they have lower reflectance ratethan traditional resistive and capaci...