Page 2 - Copyright Notice; st Edition
UNO-1170 User Manual ii Copyright Notice The documentation and the software included with this product are copy-righted 2009 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice...
Page 4 - CE; Step 1. Visit the Advantech web site at; Packing List
UNO-1170 User Manual iv CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. FCC Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These ...
Page 5 - Safety Instructions; Read these safety instructions carefully.
v Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for clean-ing. 4. For plug-in equipment, the power outlet socket...
Page 6 - Safety Precaution - Static Electricity
UNO-1170 User Manual vi -10° C (14° F) OR ABOVE 60° C (140° F). THIS COULD DAM-AGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT. 16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER, D...
Page 7 - Contents; Chapter
vii Table of Contents Contents Chapter 1 UNO-1170 Overview ....................................... 2 1.1 Introduction ....................................................................... 2 1.2 Hardware Specifications ................................................... 2 1.3 Safety Precautions ......
Page 10 - Hardware Specifications; 12 KB Battery-backup RAM
UNO-1170 User Manual 2 Chapter 1 UNO-1170 Overview 1.1 Introduction UNO-1170 is an DIN-rail mounted Embedded Automation Computer, which provides several serial communication ports and Ethernet interfaces. UNO-1170 is designed with a compact size, small footprint, and help to saves space with its fro...
Page 11 - Safety Precautions; Always disconnect the power cord from your chassis when
3 • Vibration Protection: IEC 68 2-64 (Random 1 Oct./min, 1hr/axis), CompactFlash: 2Grms@ 5~500Hz, (Optional, UNO-1170E only) HDD: 0.5 Grms @ 5~500Hz • Power Supply Voltage: 10-36 VDC, reversed wiring protection • Power Requirement: Min. 48 W (10 ~ 53 VDC) (e.g +24 V @ 2 A) (ATX) • Power Consumption...
Page 12 - Chassis Dimensions
UNO-1170 User Manual 4 1.4 UNO-1170 Series There are four products in UNO-1170 series, as listed below: 1.5 Chassis Dimensions Figure 1.1: UNO-1170 Chassis Dimensions UNO-1170-C11E UNO-1170 with Intel Celeron M 1.0GHz CPU and 512MB RAM UNO-1170-P12E UNO-1170 with Intel Pentium M 1.4GHz CPU and 1GB R...
Page 15 - CH
2 Hardware Functionality Sections include:•UNO-1170 Peripherals•COM1: RS-232 Interfaces•COM2~3: RS-232/422/485 Interfaces•LAN: Ethernet Connector•Power Connector•LED Indicators•PS/2 Keyboard and Mouse Connector•Universal Serial Bus Connectors•VGA: VGA Display Connector•RESET: Reset Button•Audio• PC/...
Page 16 - Chapter 2 Hardware Functionality
UNO-1170 User Manual 8 Chapter 2 Hardware Functionality 2.1 UNO-1170 Peripherals The following figures show the connectors on UNO-1170. and UNO-1170E. Information in this chapter is applied to both UNO-1170 and UNO-1170E. Therefore, in this chapter, we just mention UNO-1150 to represent the series p...
Page 19 - Serial Port
11 2.3.4 RS-232/422/485 Selection COM2 and COM3 support 9-wire RS-232, RS-422 or RS-485 interfaces, and you can set corresponding jumpers to select serial ports as RS-232 or RS-422/485 interfaces shown in Table 2.2. Please note to reset the system to adapt this configuration change The system detect...
Page 22 - PWR; : system power status; IDE; : Serial communication status of COM Port n; DIAG; : a programmable LED indicator to show a systems status; BTR; : Replace battery when this LED is active; Universal Serial Bus Connectors
UNO-1170 User Manual 14 2.6 LED Indicators • There are five kinds of LEDs on the UNO-1170 front panel• PWR : system power status • IDE : IDE bus status • Txn, Rxn : Serial communication status of COM Port n • DIAG : a programmable LED indicator to show a systems status • BTR : Replace battery when t...
Page 23 - UNO-1170 provides a reset button on the top of the device.; Battery Backup SRAM; LED and Buzzer for System Diagnosis
15 2.10 RESET: Reset Button UNO-1170 provides a reset button on the top of the device. 2.11 Audio UNO-1170 supports audio function with: - Line In- Line Out 2.12 Battery Backup SRAM UNO-1170 provides 512 KB of battery backed SRAM. This ensures that you have a safe place to store critical data. You c...
Page 27 - Initial Setup
3 Initial Setup Sections include:• CompactFlash Installation• PCI-104 Card Installation (UNO-1170E)• Hard Drive Installation (UNO-1170E)• Chassis Grounding• Power Connection• BIOS Setup and System Assignments CH AP T E R
Page 28 - Chapter 3 Initial Setup; CompactFlash Card Installation; Unscrew six screws from UNO-1170 indicated below.
UNO-1170 User Manual 20 Chapter 3 Initial Setup 3.1 CompactFlash Card Installation The procedure for installing a CompactFlash card into the UNO-1170/UNO-1170E is as follows, please follows these steps carefully. Although the outside appearance of the UNO-1170E is different from the figures shownbel...
Page 30 - USB Keypro and Keypro Bracket Installation
UNO-1170 User Manual 22 3.2 USB Keypro and Keypro Bracket Installation 1. Keep the rear cover removed and have the USB keypro dongle ready. (Note: Only the upper internal USB connector will work. The lower is a dummy connector and won’t have any function) 2. Insert the USB keypro/dongle dongle into ...
Page 32 - Unscrew six screws from UNO-1170E indicated below.
UNO-1170 User Manual 24 3.5 PC/104+ Card Installation (UNO-1170E) The procedure for installing a PC/104+ card into the UNO-1170E is shown as following step.1. Remove the power. 2. Unscrew six screws from UNO-1170E indicated below.
Page 33 - Remove the rear cover.
25 3. Remove the rear cover. 4. Find 2 metal spacer from accessory bag, and screw tight on the location indicated arrow in the below picture. (Note: There were spacers soldered on the daughter board already). Normally you will also get some hexagon spacer from your PCI-104 card packing. Use and scre...
Page 36 - Screw the rear cover and the six screws.
UNO-1170 User Manual 28 6. Turn the hard drive bracket and align with the screw hole on the rear cover. Use the four screws taken from step 4 and screw the bracket and the rear cover tight. 7. Connect the other end of SATA cable on the board which the arrow indicated in below picture. 8. Screw the r...
Page 37 - BIOS Setup and System Assignments; Let UNO-1170 down straight to slide over the Rail smoothly.
29 3.7 BIOS Setup and System Assignments UNO-1170 uses the Advantech SOM-4481 and SOM-4486 CPU module. For UNO-1170 BIOS setup and system assignments, you can refer to SOM-4481 and SOM-4486 Chapter 4 “Award BIOS Setup” and Appen-dix A “System Assignments”. The SOM-4481 & SOM-4486's user’s manual...
Page 38 - Wallmounting Setup
UNO-1170 User Manual 30 3.9 Wallmounting Setup Please follow the below steps to mount the UNO-1170 on the wall.1. Screw the provided Wall Mounting Kit on the rear side of UNO-1170 as the diagram shown below. 2. Mount the device on the wall by the 2 pairs hooking hole provided by the Wallmounting Kit...
Page 40 - Address Range Device
UNO-1170 User Manual 32 Appendix A System Settings and Pin Assignments A.1 System I/O Address & Interrupt Assignments Table A.1: UNO-1170 System I/O Ports Address Range Device 000-01F DMA controller (slave) 020-03F Interrupt controller 1, (master) 040-05F 8254 timer/counter 060-06F 8042 (keyboar...
Page 41 - Interrupt Source
33 Table A.2: UNO-1170 Interrupt Assignment Interrupt No. Interrupt Source NMI Parity error detected IRQ 0 Interval timer IRQ 1 Keyboard IRQ 2 Interrupt from controller 2 (cascade) IRQ 3 COM2 IRQ 4 COM1 IRQ 5 Available IRQ 6 Diskette controller (FDC) IRQ 7 Available IRQ 8 Real-time clock IRQ 10 COM3...
Page 42 - A.2 Board Connectors and Jumpers
UNO-1170 User Manual 34 A.2 Board Connectors and Jumpers There are connectors and jumpers on the UNO-1170 board. The follow-ing sections tell you how to configure the UNO-1170 hardware setting. Figure A-1 and figure A-2 show the locations of UNO-1170 connectors and jumpers. Figure A.1: Connector &am...
Page 48 - Display Memory; Table A.11: USB Connector Pin Assignments
UNO-1170 User Manual 40 A.8 USB Connector (CN13) A.9 VGA Display Connector (CN15) Display Memory With 64MB share memory, the VGA controller can drive CRT displays or color panel displays with resolutions up to 1600 x 1200 at 85 Hz. Table A.11: USB Connector Pin Assignments Pin Signal Name Cable Colo...
Page 51 - Appendix
