Advantech EKI-2525P - Manuals

5 Chapter1 Certifications Safety UL, 60950-1, CAN/CSA-C22.2 No.60950 EMC U.S.A.: FCC Part 15 CISPR 22 EU: EN55011, EN61000-6-4 EN55022, Class A, EN61000-3-2/3 EN55024 IEC61000-4-2/3/4/5/6/8/11/12 EN61000-6-2/4 Free Fall IEC60068-2-32 Shock IEC60068-2-27 Vibration IEC60068-2-6

EKI-2525P_Manual_ed1 6 1.4 Packing List • 1 x EKI-2525P Industrial Ethernet Switch • 1 x eAutomation Industrial Communication CD-ROM with software, and User manual • 2 x Wall Mounting Bracket and Screws • 1 x DIN-rail Mounting Bracket and Screws • 1 x EKI-2525P Startup Manual • 1 x DC Jack Cable 2.0...

7 Chapter2 Installation Sections include: z LED Indicators z Dimensions z Mounting z Network Connection z Power Connection CHAPTER

EKI-2525P_Manual_ed1 8 Chapter 2 Installation In this chapter, you will be given an overview of the EKI-2525P hardware installation procedures. 2.1 LED Indicators There are few LEDs display the power status and network status located on the front panel of EKI-2525P, each of them has its own specific...

13 Chapter2 2.3 Mounting The EKI-2525P supports two mounting methods: DIN-rail & Wall. 2.3.1 Wall mounting EKI-2525P can be wall-mounted by using the included mounting kit. Then, hang on the EKI-2525P to the nails on the wall. First, use the screws included in the package to combine the EKI-2525...

EKI-2525P_Manual_ed1 14 2.3.2 DIN-rail Mounting You can also mount EKI-2525P on a standard DIN-rail by below steps. The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit is not screwed on the industrial switch, please screw the DIN-rail kit on the switch first...

EKI-2525P_Manual_ed1 20 Appendix A Pin Assignment & Wiring It is suggested to adopt ELA/TIA as the wiring of the RJ-45. Figure A.1: RJ-45 Pin Assignment Figure A.2: EIA/TIA-568B Figure A.2: EIA/TIA-568A