Advantech FPM-3150G - Manuals

Advantech FPM-3150G – Manual in PDF format online.

Manuals:

Manual

Manual Advantech FPM-3150G

Summary

Page 2 - Copyright Notice

FPM-3150 Series User Manual ii Copyright Notice This document is copyrighted by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time. Specifications are thus subject to change without notice.No p...

Page 4 - FCC Class B; to which the receiver is connected

FPM-3150 Series User Manual iv FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-ence when the equipment is operated in...

Page 6 - Safety Instructions; Read these safety instructions carefully.

FPM-3150 Series User Manual vi Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for clean-ing. 4. For plug-in equip...

Page 7 - Wichtige Sicherheishinweise; Bitte lesen sie Sich diese Hinweise sorgfältig durch.

vii 15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCON-TROLLED ENVIRONMENT WHERE THE STORAGE TEM-PERATURE IS BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE EQUIPMENT. The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70dB(A).DISCLAIMER: This ...

Page 9 - Contents; Chapter

ix Table of Contents Contents Chapter 1 Introduction ..................................................... 2 1.1 Introduction ....................................................................... 2 1.2 Specifications .................................................................... 2 1.3 LCD Sp...

Page 11 - Introduction; This chapter includes:

2 CH APTER 1 Introduction This chapter includes: • Introduction• Specifications• LCD Specification• Power Consumption• Connectors• Dimensions

Page 12 - Chapter 1 Introduction; General; Heavy-duty aluminum and steel chassis

FPM-3150 Series User Manual 2 Chapter 1 Introduction 1.1 Introduction Advantech's FPM-3150G is a 15" color TFT LCD flat panel monitor built specifically for industrial applications. With the optional touchscreen, FPM-3150G is an excellent and user-friendly system control interface.In addition to...

Page 13 - wire, analog resistive; LCD Specification; XGA TFT LCD; Storage Temperature:; Power Consumption

3 Chapter 1 Touchscreen (Optional) • Type: 8 wire, analog resistive • Resolution: 1024 x 1024 • Light Transmission: >80% (Gouge Hardness is greater tahn 4H per ASTM D3363-92 for HCC01, HCG10 and HCG12 • Operating Pressure: 30 ~ 45 gram for stylus pen contact bounce < 10 ms • Controller: USB &a...

Page 14 - DC 12V Power In

FPM-3150 Series User Manual 4 1.5 Connectors The following connectors are situated on the left hand side of the FPM-3150G Series: VGA Port (DB-15) This DB-15 connector can be connected to the system via the external 15-pin DB-15 connector locatd on the left side of the system unit. DVI Port (DVI-D) ...

Page 17 - Mounting

2 CH APTER 2 Mounting • Wallmounting• Panel Mounting• Rack Mounting• Desktop Mounting• Swing Arm Mounting

Page 18 - Chapter 2 Mounting; Mounting the Monitor; Screw the hook and panel-mount brackets on the wall.

FPM-3150 Series User Manual 8 Chapter 2 Mounting 2.1 Mounting the Monitor The FPM-3150G Series can be mounted in many different ways. The versatility of the FPM-3150G mounts enable it to be mounted on your desk or anywhere else. 2.1.1 Wall Mounting FPM-3150G can be mounted directly on a wall with pa...

Page 23 - APPENDIX; Touchscreen

Page 24 - Appendix A Touchscreen; A.2 Touchscreen Specifications; Input Method and Activation Force

FPM-3150 Series User Manual 14 Appendix A Touchscreen A.1 Introduction The FPM-3150G Series optional touchscreen uses advanced 8-wire resis-tive technology. It provides more accurate sensing capacity than other technologies. The touchscreen is specially designed for tough industrial environments, an...

Page 25 - Linear Test Specifications; Environment Specifications; if 40° C, humidity < 90% RH No dew condensation

15 Appendix A 4. Linearity 4.1 Linear Test Specifications Direction X: <1.5 %Direction Y: <1.5 % 4.2 Linearity Test Apply voltage (DC5V) to upper (or lower ) electrodes, output voltage Vx or Vy on the other electrodes is measured at every regular intervals.Linearity is the value of max. error ...

Page 26 - A.3 Installing Driver for Windows OS

FPM-3150 Series User Manual 16 A.3 Installing Driver for Windows OS The touchscreen has drivers for Windows 2000 /XP/2003/Vista. You should read the instructions in CD-ROM Disk Touchscreen section care-fully before you attempt installation. The FPM-3150G-XCE, RCE need to install Penmount 6000 driver...

Page 28 - Appendix B Setting Serial Data for; B.1 Setting Serial Data for Expansion

FPM-3150 Series User Manual 18 Appendix B Setting Serial Data for Expansion B.1 Setting Serial Data for Expansion The twelve kinds of timings below are already programmed in this mod-ule. The input synchronous signals are automatically recognized. Resolution Vertical Frequencies56 Hz 60 Hz 70 Hz 72 ...

Page 30 - Appendix C; C.1 OSD Board Overview; Buttons; ON

FPM-3150 Series User Manual 20 Appendix C OSD Operation Keypad C.1 OSD Board Overview The OSD keypad, including six keys and a two color indicator, is designed as the OSD operation interface C.1.1 OSD Button Description C.1.2 LED Function Buttons Descriptions Power Turn the monitor power ON or OFF. ...

Page 31 - C.2 OSD Key Functions; Generate Main Menu

21 Appendix C C.2 OSD Key Functions Each selected value is stored into LCD memory after SEL signal input or time out. The stored values are not affected if the power is turned off. But the selected value is not available in case a selected mode is changed before time out or power is turned off befor...

Page 32 - Left

FPM-3150 Series User Manual 22 C.2.2 Input Source Select • Generate Main Menu Select by Left and Right Button, press Menu Button for selection confirmation• Main Menu -- DISPLAY IN SCREEN • Sub-Menu – DISPLAY IN SCREEN • Available Key Functions Power Off the LCD Monitor Increase the gauge value of t...

Page 33 - Auto Select Input; Sub-Menu – DISPLAY IN SCREEN

23 Appendix C 4. Auto Select Input • ON Æ start from default setting and scan the inputs by following sequence from ANALOG INPUT, DIGITAL INPUT, S-VIDEO INPUT, and CVBS INPUT. • OFF Æ start from default setting C.2.3 Contrast/ Brightness Setting • Generate Main Menu Select by Left and Right Button, ...

Page 35 - • Available Key Functions

25 Appendix C • Available Key Functions Power Off the LCD Monitor Increase the gauge value of the selected option. Return to last menu Selected to confirm Decrease the gauge value of the selected option. N/A

Page 45 - • Don’t remove the HOT KEY until the screen indicated this task is fin-

35 Appendix C • Entry OSD UNLOCK MODE• Press HOT KEY, the screen will show this action first • Don’t remove the HOT KEY until the screen indicated this task is fin- ished.