Adam Equipment MCW-250L - Manuals

© Adam Equipment Company 2008 6 4.0 SETTING UP THE SCALE The MCW-250L comes with a chair fitted on the scale platform. There is no assembly necessary, attach the indicator to the bracket, simply plug in the power supply and it is ready for use. The indicator could be removed from the chair for mount...

© Adam Equipment Company 2008 7 • If the scale is still displaying a small weight when there is no load on the platform, it needs to be zeroed. Press the [Tare/Zero] key to zero the display. The arrow above Zero will be on. If the zero display is not achieved then the scale may need to be re-calibra...

© Adam Equipment Company 2008 8 6.0 USER PARAMETERS 6.1 AUTO POWER OFF Press [Func] and [Tare/Zero] keys at the same time and display will show “ t x ”. t (time) x (digit 0-9, total 10 settings) Press the [Func] key. x will change from 0 to 9. X=0……………no automatically power off function X=1……………auto...

© Adam Equipment Company 2008 9 6.2.2 CAPACITY SETTING Press the [Hold] key to enter the calibration. Simply place the calibration mass to set up. Suggested value of the calibration mass is 50kg. However for higher accuracy the calibration mass should be as high as possible, maximum being 250kg. Pre...

© Adam Equipment Company 2008 Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonised European standards, following the provisions of the below stated directives: Electro Magnetic Compatibility Directive 89/336/EEC Low Voltage Directive 73/23/EEC...