Page 2 - Display Unit
2 Features & Benefits Display Unit 8 1 2 3 4 5 6 7 17 16 18 19 20 9 10 13 11 12 1415 21 23 22 27 26 25 28 29 30 33 34 3132 24
Page 4 - Display Unit Setup; Install or Replace Batteries; A B C
4 Display Unit Setup Set the A-B-C Switch Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize. Install or Replace Batteries 1. Remove the batt...
Page 5 - Display Backlight Settings
5 Set the Time, Date & Units Press the “SET” button, located on the front of the display unit, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display.To adjust the currently selected (flashing) item, press and release the “+“ or “ -- “ buttons (pr...
Page 6 - Placement for Maximum Accuracy; Display Unit Placement; Place the display unit in a dry area free of dirt and dust. To ensure; Important Placement Guidelines; Display unit and sensor must be within 330 feet (100 m) of each other.; MAXIMIZE WIRELESS RANGE; that may limit wireless communication.; PREVENT WIRELESS INTERFERENCE; OPERATION; rior weather prediction.; Weather Forecast
6 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and ...
Page 7 - LOW, AVERAGE and PEAK wind speeds. PEAK, AVERAGE and LOW wind speeds
7 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and ...
Page 8 - REPLAY Historical Data
8 REPLAY Historical Data This weather station stores historical data that can be viewed in Replay Mode. Data is recorded for the past 48 hours in 30 minute intervals (on the hour and half hour). Historical data is shown with a time and date stamp. Press the “REPLAY” button to enter Replay Mode. The ...
Page 9 - Display Unit Care; Calibration
9 Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Calibration The indoor / outdoor temperature and humidity readings, wind speed inte...
Page 11 - Limited One Year Warranty; PRODUCT REGISTRATION; Register online; IMPORTANT; Customer Support; AcuRite
11 At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. We recomm...
Page 12 - It’s More than Accurate, it’s; designed to provide you with information you can depend on to
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy-rights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details. Printed in...