AcuRite 06018RM - Manual
AcuRite 06018RM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Display Unit
- Page 4 – Display Unit Setup; Install or Replace Batteries; A B C
- Page 5 – Display Backlight Settings
- Page 6 – Placement for Maximum Accuracy; Display Unit Placement; Place the display unit in a dry area free of dirt and dust. To ensure; Important Placement Guidelines; Display unit and sensor must be within 330 feet (100 m) of each other.; MAXIMIZE WIRELESS RANGE; that may limit wireless communication.; PREVENT WIRELESS INTERFERENCE; OPERATION; rior weather prediction.; Weather Forecast
- Page 7 – LOW, AVERAGE and PEAK wind speeds. PEAK, AVERAGE and LOW wind speeds
- Page 8 – REPLAY Historical Data
- Page 9 – Display Unit Care; Calibration
- Page 11 – Limited One Year Warranty; PRODUCT REGISTRATION; Register online; IMPORTANT; Customer Support; AcuRite
- Page 12 – It’s More than Accurate, it’s; designed to provide you with information you can depend on to
Instruction Manual
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Questions?
Contact Customer Support at
(877) 221-1252 or visit www.
AcuRite
.com.
Display for 3-in-1 Weather Sensor
model 06018RM
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.
AcuRite
.com
IMPORTANT
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
►
Register a Product
Package Contents
1. Display unit with tabletop stand
2. Power adapter
3. Instruction Manual
This product requires an AcuRite 3-in-1 Weather Sensor (model 06008RM; sold
separately) to be operational.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Features & Benefits Display Unit 8 1 2 3 4 5 6 7 17 16 18 19 20 9 10 13 11 12 1415 21 23 22 27 26 25 28 29 30 33 34 3132 24
4 Display Unit Setup Set the A-B-C Switch Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize. Install or Replace Batteries 1. Remove the batt...
5 Set the Time, Date & Units Press the “SET” button, located on the front of the display unit, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display.To adjust the currently selected (flashing) item, press and release the “+“ or “ -- “ buttons (pr...
