Page 3 - Important safety instructions
English 3 Important safety instructions Read these instructions carefully. Please put them somewhere safe for future reference.1. Only use attachments/accessories specified by the manufacturer.2. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the...
Page 4 - Disposal instructions
English 4 personnel under the following conditions: a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the product.c. If the product has been exposed to rain or water.d. If the product does not operate normally when the operating instructions are followed. Adjust ...
Page 5 - Your LCD TV overview; Front and side panels
English 5 Your LCD TV overview Front and side panels (AT2618MF/AT3218MF) 1 Standby Turns the TV ON and OFF. 2 Channel up When the OSD is on, functions the same as the Up arrow. 3 Channel down When the OSD is on, functions the same as the Down arrow. 4 Volume up When the OSD is on, functions the same...
Page 6 - Rear panel view
English 6 Rear panel view (AT2618MF/AT3218MF/AT2628ML) 1 AV (SCART) 5 PC Audio L/R 2 COMPONENT-in + Audio-in L/R 6 HDMI 2 port 3 VGA-in 7 Antenna/Cable-in 4 SPDIF out SCART COMPONENT PC IN SPDIF OUT HDMI2 ANT/RF Y P B P R L R D-SUB AUDIO 1 2 3 6 4 5 7 Rear panel view (AT3228ML/AT4028ML) 8 COMPONENT-...
Page 7 - Side AV label view
English 7 Side AV label view (AT2618MF/AT3218MF/AT2628ML) 1 Common interface 3 USB port 2 HDMI1 port 4 Earphone 12 34 Side AV label view (AT3228ML/AT4028ML) 5 SPDIF out 9 HDMI2 port 6 Earphone 10 HDMI3 port 7 Common interface 11 USB port 8 HDMI1 port SPDIF HDMI1 USB HDMI2 COMMON INTERF ACE HDMI3 OUT...
Page 8 - General keys; Remote control
English 8 General keys Remote control 16:9 format and 4:3 format modes. 6 MPX Press to select a sound type available for the selected analogue TV programme; to select an audio langugae available for the selected digital TV programme. 7 MENU Press to open the Menu. Press to back to the previous menu....
Page 9 - Teletext; Teletext and Multimedia
English 9 Teletext 1 Colour buttons (R/G/Y/B) Operates corresponding button on the teletext page. 2 INDEX No function. 3 SIZE Press once to zoom teletext page to 2X and view the top part. Press twice to view the bottom part of 2X teletext page. Press again to resume. 4 HOLD Press to pause the curren...
Page 10 - Connecting the power cord; Basic connections; Connecting an antenna/cable
English 10 Connecting the power cord 1 Connect the AC cord into the AC input on the back of the set. 2 Connect the plug to the wall outlet as shown. Basic connections Enjoying analog and digital TV Connecting an antenna/cable Connect the antenna cable to the appropriate antenna terminal on the back ...
Page 11 - Getting started watching your TV; Power; Changing channels; Adjusting the volume
English 11 Getting started watching your TV You can also adjust these settings using the side control panel. Please see "Front and side panels" on page 5 for details. 1 Power Press the power button on the remote control or TV set. 2 Installation Guide The first time you switch on the TV, you...
Page 12 - Wall mount preparation /
English 12 1) Remove the base. 2) Remove the screws from inside the stand. AT2618MF/AT3218MF AT2628ML/AT3228ML/AT4028ML 3) Assemble the wall mount following the instructions included with the wall mount. Wall mount preparation / removing the base Caution: Disassemble the base carefully otherwise the...
Page 13 - Connecting external audio/video; equipment
English 13 Connecting external audio/video devices Connecting a DVD, VCR, STB or audio/video equipment Connect your DVD player, VCR or audio/video equipment using the input ports located at the rear of your LCD TV as shown below. Source-in Green * Acer recommends the following priority for connectio...
Page 14 - Connecting a camera, camcorder or game console
English 14 TV-out Connecting a camera, camcorder or game console Connect your camera or camcorder to the video/audio ports on the TV set as shown below. for AT3228ML/AT4028ML HDMI COMPONENT Y P R R L PC AUDIO IN SCART ANT/RF D-SUB SPDIF HDMI1 USB HDMI2 COMMON INT ERF ACE HDMI3 OUT R B G R B G W R W ...
Page 15 - Connecting a PC or notebook computer
English 15 Connecting a PC or notebook computer To display PC output on your TV, connect your PC or notebook computer to the TV as shown below. For VGA connections, Acer recommends setting your PC’s external monitor resolution to 1920 x 1080 pixels @ 60 Hz refresh rate for AT3218MF/AT3228ML/AT4028ML...
Page 16 - Selecting the input source
English 16 Selecting the input source Once you have connected your antenna or external equipment to the TV, you need to select the correct input source. Press the SOURCE button on the remote control to display the Source menu. Use the up/ down directional keys to navigate the list and press OK to co...
Page 17 - Playing multimedia files from a USB; Connecting a USB storage device
English 17 Playing multimedia files from a USB storage device Connecting a USB storage device Connect the USB storage device to the USB port on your TV, the TV will enter the media center menu directly. Supported file formats: Photo JPG, JPEG Music MP3, AC 3, LPCM, ADPCM, AAC, MPEG Video AVI, MPEG1,...
Page 18 - View Photo
English 18 View Photo Select a picture and press OK to open it. Picture files will be shown in a slideshow. Press OK or Play/Pause to pause the display on a specific photo. Press the MENU key to display the information bar at the bottom. Press the MENU key again to display the options list and use u...
Page 19 - Watch video; Leaving multimedia storage display
English 19 left/right to adjust. The menu includes the Audio Only option. Select it and press OK , you can listen to music with the screen turned off. Press any key to exit the audio only mode. Press the left and right directional keys to advance or rewind in a track. Press BACK to return to the fol...
Page 20 - To open the channel list feature:; Channel controls; Channel list
English 20 To open the channel list feature: 1 Press the OK key on the remote control. This will bring up the channel list menu. 2 The current channel will be highlighted. 3 Use the up/down directional keys to navigate the list and select the channel you wish to watch. Use the red key to switch to t...
Page 21 - Favourite channel list; Viewing your favourite channels; Storing favourite channels
English 21 Favourite channel list The favourite channel list allows you to store your favourite TV channels and flick between them at the touch of a button. Viewing your favourite channels On the remote control, if you press the FAV key, the TV will display a list of favourite TV channels. Use the u...
Page 22 - Programme information; GUIDE; Electronic programme guide
English 22 Programme information Press the DISPLAY key once to see information about the current programme (if available), press twice to see the lower part information and press the third time to see the channel number and the time only. a. Programme titleb. Programme schedulec. Programme summaryd....
Page 23 - Guide screen
English 23 Guide screen There are four main areas of the EPG screen: The top of the screen shows the viewing date and the current time. The section on the left shows all names for digital channels. The section on the right shows information about programmes for the selected channel: the start and fi...
Page 24 - OSD navigation; Navigating the OSD with the remote control
English 24 OSD navigation Many of the advanced settings and adjustments are available through using the OSD (onscreen display) menus, as shown in the example screenshot below. Basic operations required to navigate these menus (Picture, Sound, PAP, Options, USB, Timer, Lock and Setup) are described i...
Page 25 - Adjusting the OSD settings; Adjusting picture quality
English 25 Adjusting the OSD settings The OSD can be used for adjusting the settings of your LCD TV. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, audio settings, channel settings and general settings. For advanced settings, please refer to the following page...
Page 26 - Adjusting timer settings
English 26 The options available on the OSD may vary depending on the TV signal source and model. Some digital options may not be available with an analog signal and vice versa. 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select Options from the OSD. Then navigate to the ...
Page 27 - OSD menus; Picture settings
English 27 OSD menus Picture settings Open the Picture menu as described in the OSD navigation section. This menu provides the following settings: Picture preset This TV provides preset viewing modes designed to give you the best picture quality when watching a particular kind of programme. These pr...
Page 28 - Sound settings
English 28 Color temperature This setting adjusts the color temperature of the image. You can set it to Normal , Warm , Cool depending on your preference. Screen mode This setting adjusts the screen mode of the image. You can set it to Cinerama , 14:9 Zoom , 16:9 Zoom , 16:9 Zoom up , Wide Zoom , Zo...
Page 29 - Visually impaired; PAP function; PAP; Options settings; Subtitle; Decoding page language
English 29 Visually impaired Set overall volume and if Visually Impaired mode uses speakers, headphones or both. PAP function Open the PAP menu as described in the OSD navigation section. This menu provides the following settings: PAP Turn the PAP function on or off. When PAP function is turned on, ...
Page 30 - Current version
English 30 Digital Teletext language Select the primary language used for digital teletext pages. SPDIF type Select a proper sound type for the current programme to output sound to the auido device connected through the SPDIF output terminal. The options you may choose depend on the programme you ar...
Page 31 - Timer settings; Time zone; Auto synchronization; Sleep timer; Lock settings; Channel lock; Parental rating
English 31 Timer settings Open the Timer menu as described in the OSD navigation section. This menu provides the following settings: Time zone Select a time zone. Clock Auto synchronization Turn on auto synchronization and the TV will detect the time from digital channels. Date If auto synchronizati...
Page 32 - Set up the TV; Automatic search
English 32 Input lock Press OK to see the list of input sources (AV, HDMI, etc.). Use the up and down directional keys to select the input source to block and then press OK to lock. Press the OK again to unblock an input source. Front panel lock Lock or unlock the keys on the side panel. Installatio...
Page 33 - Analog manual scan; Clean channel list
English 33 Analog manual scan You can manually scan an analog channel by adjusting the settings here. Digital manual scan You can manually add a channel by adjusting the settings here. Clean channel list You can manually clean all channels you set here. Organiser You can use these settings to skip c...
Page 34 - Special functions
English 34 Special functions Before you use the Time shift or PVR functions, connect a USB storage device to the TV. Time shift This allows you to record TV programs so that you won’t miss your favorite moments, even if you go out Before using the Time shift function, you must connect and set up a U...
Page 35 - Troubleshooting; There is no picture or sound
English 35 Troubleshooting Before you call the Acer service center, please check the following items: Here is a list of possible situations that may arise during the use of your LCD TV. Easy answers and solutions are provided for each. There is no picture or sound • Make sure the power cord is prope...
Page 36 - PC input signal reference chart
English 36 PC input signal reference chart PC input does not support Sync on Green, Composite Sync or interlaced signals. AT2628ML & AT2618MF Item Resolution Frequency (Hz) 1 640 x 480 60 2 640 x 480 75 3 800 x 600 60 4 800 x 600 75 5 1024 x 768 60 6 1024 x 768 75 7 1366 x 768 60 AT3228ML & ...
Page 37 - Product specifications
English 37 Product specifications Model AT2628ML AT3228ML AT4028ML Panel spec Resolution (pixels) 1366 x 768 1920 x 1080 Brightness (typ.) 350 cd/m2 400 cd/m2 Dynamic Contrast Ratio (max.) 3000:1 4000:1 Viewing angle (typ.) 89°(H), 89°(V) Response (typ.) 6.5 ms 8 ms Power supply Input 220 Vac to 240...
