Acer AT2628ML- User Manual

English 6 Rear panel view (AT2618MF/AT3218MF/AT2628ML) 1 AV (SCART) 5 PC Audio L/R 2 COMPONENT-in + Audio-in L/R 6 HDMI 2 port 3 VGA-in 7 Antenna/Cable-in 4 SPDIF out SCART COMPONENT PC IN SPDIF OUT HDMI2 ANT/RF Y P B P R L R D-SUB AUDIO 1 2 3 6 4 5 7 Rear panel view (AT3228ML/AT4028ML) 8 COMPONENT-...

English 7 Side AV label view (AT2618MF/AT3218MF/AT2628ML) 1 Common interface 3 USB port 2 HDMI1 port 4 Earphone 12 34 Side AV label view (AT3228ML/AT4028ML) 5 SPDIF out 9 HDMI2 port 6 Earphone 10 HDMI3 port 7 Common interface 11 USB port 8 HDMI1 port SPDIF HDMI1 USB HDMI2 COMMON INTERF ACE HDMI3 OUT...

English 8 General keys Remote control 16:9 format and 4:3 format modes. 6 MPX Press to select a sound type available for the selected analogue TV programme; to select an audio langugae available for the selected digital TV programme. 7 MENU Press to open the Menu. Press to back to the previous menu....

English 9 Teletext 1 Colour buttons (R/G/Y/B) Operates corresponding button on the teletext page. 2 INDEX No function. 3 SIZE Press once to zoom teletext page to 2X and view the top part. Press twice to view the bottom part of 2X teletext page. Press again to resume. 4 HOLD Press to pause the curren...

English 10 Connecting the power cord 1 Connect the AC cord into the AC input on the back of the set. 2 Connect the plug to the wall outlet as shown. Basic connections Enjoying analog and digital TV Connecting an antenna/cable Connect the antenna cable to the appropriate antenna terminal on the back ...

English 11 Getting started watching your TV You can also adjust these settings using the side control panel. Please see "Front and side panels" on page 5 for details. 1 Power Press the power button on the remote control or TV set. 2 Installation Guide The first time you switch on the TV, you...

English 12 1) Remove the base. 2) Remove the screws from inside the stand. AT2618MF/AT3218MF AT2628ML/AT3228ML/AT4028ML 3) Assemble the wall mount following the instructions included with the wall mount. Wall mount preparation / removing the base Caution: Disassemble the base carefully otherwise the...

English 13 Connecting external audio/video devices Connecting a DVD, VCR, STB or audio/video equipment Connect your DVD player, VCR or audio/video equipment using the input ports located at the rear of your LCD TV as shown below. Source-in Green * Acer recommends the following priority for connectio...

English 14 TV-out Connecting a camera, camcorder or game console Connect your camera or camcorder to the video/audio ports on the TV set as shown below. for AT3228ML/AT4028ML HDMI COMPONENT Y P R R L PC AUDIO IN SCART ANT/RF D-SUB SPDIF HDMI1 USB HDMI2 COMMON INT ERF ACE HDMI3 OUT R B G R B G W R W ...

English 15 Connecting a PC or notebook computer To display PC output on your TV, connect your PC or notebook computer to the TV as shown below. For VGA connections, Acer recommends setting your PC’s external monitor resolution to 1920 x 1080 pixels @ 60 Hz refresh rate for AT3218MF/AT3228ML/AT4028ML...

English 16 Selecting the input source Once you have connected your antenna or external equipment to the TV, you need to select the correct input source. Press the SOURCE button on the remote control to display the Source menu. Use the up/ down directional keys to navigate the list and press OK to co...

English 17 Playing multimedia files from a USB storage device Connecting a USB storage device Connect the USB storage device to the USB port on your TV, the TV will enter the media center menu directly. Supported file formats: Photo JPG, JPEG Music MP3, AC 3, LPCM, ADPCM, AAC, MPEG Video AVI, MPEG1,...

English 18 View Photo Select a picture and press OK to open it. Picture files will be shown in a slideshow. Press OK or Play/Pause to pause the display on a specific photo. Press the MENU key to display the information bar at the bottom. Press the MENU key again to display the options list and use u...

English 19 left/right to adjust. The menu includes the Audio Only option. Select it and press OK , you can listen to music with the screen turned off. Press any key to exit the audio only mode. Press the left and right directional keys to advance or rewind in a track. Press BACK to return to the fol...

English 20 To open the channel list feature: 1 Press the OK key on the remote control. This will bring up the channel list menu. 2 The current channel will be highlighted. 3 Use the up/down directional keys to navigate the list and select the channel you wish to watch. Use the red key to switch to t...

English 21 Favourite channel list The favourite channel list allows you to store your favourite TV channels and flick between them at the touch of a button. Viewing your favourite channels On the remote control, if you press the FAV key, the TV will display a list of favourite TV channels. Use the u...

English 22 Programme information Press the DISPLAY key once to see information about the current programme (if available), press twice to see the lower part information and press the third time to see the channel number and the time only. a. Programme titleb. Programme schedulec. Programme summaryd....

English 23 Guide screen There are four main areas of the EPG screen: The top of the screen shows the viewing date and the current time. The section on the left shows all names for digital channels. The section on the right shows information about programmes for the selected channel: the start and fi...

English 24 OSD navigation Many of the advanced settings and adjustments are available through using the OSD (onscreen display) menus, as shown in the example screenshot below. Basic operations required to navigate these menus (Picture, Sound, PAP, Options, USB, Timer, Lock and Setup) are described i...

English 25 Adjusting the OSD settings The OSD can be used for adjusting the settings of your LCD TV. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, audio settings, channel settings and general settings. For advanced settings, please refer to the following page...

English 26 The options available on the OSD may vary depending on the TV signal source and model. Some digital options may not be available with an analog signal and vice versa. 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select Options from the OSD. Then navigate to the ...

English 27 OSD menus Picture settings Open the Picture menu as described in the OSD navigation section. This menu provides the following settings: Picture preset This TV provides preset viewing modes designed to give you the best picture quality when watching a particular kind of programme. These pr...

English 28 Color temperature This setting adjusts the color temperature of the image. You can set it to Normal , Warm , Cool depending on your preference. Screen mode This setting adjusts the screen mode of the image. You can set it to Cinerama , 14:9 Zoom , 16:9 Zoom , 16:9 Zoom up , Wide Zoom , Zo...

English 29 Visually impaired Set overall volume and if Visually Impaired mode uses speakers, headphones or both. PAP function Open the PAP menu as described in the OSD navigation section. This menu provides the following settings: PAP Turn the PAP function on or off. When PAP function is turned on, ...

English 30 Digital Teletext language Select the primary language used for digital teletext pages. SPDIF type Select a proper sound type for the current programme to output sound to the auido device connected through the SPDIF output terminal. The options you may choose depend on the programme you ar...

English 31 Timer settings Open the Timer menu as described in the OSD navigation section. This menu provides the following settings: Time zone Select a time zone. Clock Auto synchronization Turn on auto synchronization and the TV will detect the time from digital channels. Date If auto synchronizati...

English 32 Input lock Press OK to see the list of input sources (AV, HDMI, etc.). Use the up and down directional keys to select the input source to block and then press OK to lock. Press the OK again to unblock an input source. Front panel lock Lock or unlock the keys on the side panel. Installatio...

English 33 Analog manual scan You can manually scan an analog channel by adjusting the settings here. Digital manual scan You can manually add a channel by adjusting the settings here. Clean channel list You can manually clean all channels you set here. Organiser You can use these settings to skip c...

English 34 Special functions Before you use the Time shift or PVR functions, connect a USB storage device to the TV. Time shift This allows you to record TV programs so that you won’t miss your favorite moments, even if you go out Before using the Time shift function, you must connect and set up a U...

English 35 Troubleshooting Before you call the Acer service center, please check the following items: Here is a list of possible situations that may arise during the use of your LCD TV. Easy answers and solutions are provided for each. There is no picture or sound • Make sure the power cord is prope...

English 36 PC input signal reference chart PC input does not support Sync on Green, Composite Sync or interlaced signals. AT2628ML & AT2618MF Item Resolution Frequency (Hz) 1 640 x 480 60 2 640 x 480 75 3 800 x 600 60 4 800 x 600 75 5 1024 x 768 60 6 1024 x 768 75 7 1366 x 768 60 AT3228ML & ...

English 37 Product specifications Model AT2628ML AT3228ML AT4028ML Panel spec Resolution (pixels) 1366 x 768 1920 x 1080 Brightness (typ.) 350 cd/m2 400 cd/m2 Dynamic Contrast Ratio (max.) 3000:1 4000:1 Viewing angle (typ.) 89°(H), 89°(V) Response (typ.) 6.5 ms 8 ms Power supply Input 220 Vac to 240...