Acer Projector - Manual

6 English ... Main Unit Product Overview 1. Focus Ring 2. Zoom Ring 3. Zoom Lens 4. Elevator Button 5. Elevator Foot 6. Remote Control Receiver 7. Connection Ports 8. Power Socket 9. Control Panel Introduction 4 5 6 7 9 8 2 3 6 2 1  The color of the projector cover in this menu is for reference onl...

7 ... English Control Panel 1. Lamp Indicator LED 2. Temp Indicator LED 3. Power/Standby and Indicator LED (Power LED) 4. Source 5. Resync 6. Four Directional Select Keys 7. Menu Introduction 4 5 1 6 3 7 2

8 English ... Introduction Connection Ports 1. DVI Input Connector (for Digital singal with HDCP function) (Op- tional) 2. PC Analog Signal/HDTV/Component Video Input Connector 3. Audio Input Connector 4. S-Video Input Connector 5. Monitor Loop-through Output Connector (VGA-Out) 6. USB Connector 7. ...

9 ... English 1. Transmit Indicator Light 2. Power 3. Empowering Key 4. Menu 5. Four Directional Select Keys 6. Laser Button 7. Digital Zoom 8. Keystone + 9. Keystone - 10. Page Up 11. Page Down Remote Control with Laser Pointer Introduction 12. Resync 13. Hide 14. Source 15. Freeze 16. Laser Pointe...

10 English ... 1. ....................................................................................................................Power Cord 2. ..................................................................................................................... VGA Cable 3. ........................

11 ... English Installation Power/Standby Powering On the Projector 1. Remove the lens cap.2. Ensure that the power cord and signal cable are securely connected. The Power LED will flash red . 3. Turn on the lamp by pressing “Power/Standby” button on the control panel.  And the Power LED will turn b...

12 English ... Installation Warning Indicator  When the “ LAMP ” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center.  When the “ TEMP ” indicator lights solid red for about 20 sec- onds, it indicates the projector has...

13 ... English Adjusting the Projected Image Adjusting the Projector Image Height Elevator Foot 1 2 Elevator Button The projector is equipped with an elevator foot for adjust- ing the image height. To raise the image: 1. Press the elevator button  . 2. Raise the image to the desired height angle  ...

14 English ... Max. 38.1" (96.8cm) 76.2" (193.6cm) 127.1" (322.7cm) 177.9" (451.8cm) 203.3" (516.3cm) 304.9" (774.5cm) Min. 34.7" (88.1cm) 69.3" (176.1cm) 115.6" (293.5cm) 161.8" (410.9cm) 184.9" (469.6cm) 277.3" (704.4cm) Max.(WxH) 30.5" x 22.9...

15 ... English User Controls Remote Control Control Panel Control Panel & Remote Control There are two ways for you to control the functions: Re- mote Control and Control Panel. Using the Control Panel Power  Refer to the “Power On/Off the Projector” section on pages 11-12. Source  Press “Sour...

16 English ... User Controls Using the Remote Control Power  Refer to the “Power On/Off the Projector” section on pages 11-12. Empowering Key Press “e” key to launch e mnu on screen display screen and use to select items. Acer eView Management  Press to launch “Acer eView Management” submenu. “ Ac...

18 English ... The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel. 2. When OS...

19 ... English Language (Computer / Video Mode) Language Choose the multilingual OSD menu . Use the or key to select your prefered language. Press “Menu” on the Remote Control or Control Panel to finalize the selection. User Controls

20 English ... User Controls Color (Computer / Video Mode) Display Mode There are many factory presets optimized for various types of images.  Bright : For brightness optimization.  PC : For computer or notebook.  Video : For playing video in a bright environment.  Theatre : For Home Theatre usa...

22 English ... User Controls Keystone Adjust image distortion caused by tilting projection. (±16 degrees) Aspect Ratio Use this function to choose your desired aspect ratio.  Auto : Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. ...

23 ... English User Controls  Rear-Ceiling When you select this function, the projector reverses and turns the image upside down at same time. You can project from behind a translucent screen with ceiling mounted projection. Menu Location Choose the Menu location on the display screen. Sharpness Ad...

24 English ... Image (Computer / Video Mode) User Controls Tracking “Tracking” synchronizes the signal timing of the display with the graphic card. If you experience an unstable or flickering image, use this function to correct it.

25 ... English Audio (Computer / Video Mode) Volume  Press the to decrease the volume.  Press the to increase the volume. Mute  Choose the “On” to turn mute on.  Choose the “Off” to turn mute off. Power On/Off Volume Choose this function to adjust volume when power on/off. Alarm Volume Choose th...

26 English ... ECO Mode Choose “On” to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose ”Off” to return normal mode. Auto Shutdown(Minutes) The projector will auto shutdown while there is no signal input after the setting time. Timer Start Pres...

27 ... English Lamp Reminding Choose this function to show or to hide warning message when the changing lamp message is displayed. The message will show up 30 hours before end of life. Start-up Screen Use this function to slect your desired start-up screen. If you change the setting from one to anot...

28 English ... Management (Computer / Video Mode) Acer eOpening Management is a PC utility for user to change the default start-up screen of Acer projector to their desired image. You can install Acer eOpening Management from the bundled CD. Con- nect the projector to your PC with the bundled USB ca...

29 ... English Problem: No image appears on screen.  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure the pins of connectors are not crooked or broken.  Check if the projection lamp has been securely installed. Pl...

31 ... English Problem: The image is outstretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is still outstretched, you will also need to adjust the aspect ratio by referring ...

33 ... English Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!” When you see this message, changing the lamp as soon as possible. Make sure the projec...

34 English ... Specifications The specs specified below are subject to change without notice. Regarding the final specs, please refer to Acer accounced marketing specs. Light Valve - Single Chip DLP TM Technology by Texas Instruments Lamp - 200W User Replaceable Lamp Number of Pixels - 800 pixels(H) X ...

35 ... English Compatibility Modes Mode Resolution (ANALOG) (DIGITAL) V.Frequency (Hz) H.Frequency (kHz) V.Frequency (Hz) H.Frequency (kHz) VESA VGA 640 x 350 70 31.5 70 31.5 VESA VGA 640 x 350 85 37.9 85 37.9 VESA VGA 640 x 400 85 37.9 85 37.9 VESA VGA 640 x 480 60 31.5 60 31.5 VESA VGA 640 x 480 7...