Aastra IP - Manuals

3 Model 480i SIP Admin Guide 480i IP Phone Set up The 480i’s Options List 1. Press the £ button on the phone to enter the options list 2. Use the r and s to scroll through the list of options 3. Press the Show softkey, the 4 button or press the number corresponding to the option to select an option ...

5 Model 480i SIP Admin Guide 480i IP Phone Set up The Aastra 480i Web Client To access the Aastra 480i Web Client, open your web browser (supports Internet Explorer and Gecko engine based browsers like Firefox, Mozilla or Netscape) and enter the phone’s IP address into the address Þ eld, starting wi...

Model 480i SIP Admin Guide 6 480i IP Phone Configuration 480i IP Phone Configuration The Network and SIP options within the 480i phone can be con Þ gured from the phone or from the Aastra 480i Web Client web interface. Administrator level options are password protected in both the phone and the web ...

7 Model 480i SIP Admin Guide 480i IP Phone Configuration From the Web Client: 1. Click on the Network sub-category under the ADMIN main category. 2. Enter the administrator ’s user name and password (the default user name is “ admin ” and password is “ 22222 ”). 3. In the web page that has just open...

Model 480i SIP Admin Guide 8 480i IP Phone Configuration Note: At this point modi Þ cations performed to the User name, Screen name, Authentication name and Password affect line 1 of the 480i only. Modi Þ cations to the other lines should be done through the <mac>.cfg Þ le. The NAT IP Address ...

9 Model 480i SIP Admin Guide Setting Parameters – Network Settings Setting Parameters – Network Settings The following section contains the parameters to con Þ gure the network settings. Parameter – dhcp Con Þ gurable through the 480i's Options List, the Aastra 480i web client or through the con Þ g...

Model 480i SIP Admin Guide 10 Setting Parameters – Network Settings Parameter – default gateway Con Þ gurable through the 480i's Options List, the Aastra 480i web client or through the con Þ guration Þ les Description The IP address of the network's gateway or the router IP address Format IP address...

11 Model 480i SIP Admin Guide Setting Parameters – Time Server Settings Setting Parameters – Time Server Settings The following section contains the parameters to con Þ gure settings speci Þ c to the timeserver. Parameter – tftp server Con Þ gurable through the 480i's Options List, the Aastra 480i w...

Model 480i SIP Admin Guide 12 Setting Parameters – Time Server Settings Parameter – time server1 Con Þ gurable through the 480i's Options List or the con Þ guration Þ les. Description The primary time server's IP address. If the time server is enabled, the value for time server1 will be used to requ...

13 Model 480i SIP Admin Guide Setting Parameters – Time Server Settings Parameter – time format Con Þ gurable through the 480i's Options List or the con Þ guration Þ les Description This parameter changes the time to 12 hour or 24 hour format. Use “0” for the 12 hour format and “1” for the 24 hour f...

Model 480i SIP Admin Guide 14 Setting Parameters – SIP Authentication Setting Parameters – SIP Authentication The following parameters are the settings speci Þ c to SIP authentication. Parameter – sip proxy ip Con Þ gurable through the 480i's Options List, the Aastra 480i web client or through the c...

15 Model 480i SIP Admin Guide Setting Parameters – SIP Authentication Parameter – sip registrar port Con Þ gurable through the 480i's Options List, the Aastra 480i web client or through the con Þ guration Þ les Description The registrar's port number Format Integer Default Value 5060 Range Not Appli...

Model 480i SIP Admin Guide 18 Setting Parameters – Softkey Settings Setting Parameters – Softkey Settings This section contains the softkey parameters that can be con Þ gured on the 480i phone. There are eighteen softkeys that can be con Þ gured. These parameters can be con Þ gured either from the A...

19 Model 480i SIP Admin Guide Setting Parameters – Softkey Settings Parameter – softkeyN value Con Þ gurable through the con Þ guration Þ les only Description If the soft key is of type, line then value should be the line number that this soft key represents. If the softkey is of type, speeddial the...

Model 480i SIP Admin Guide 20 Firmware Upgrade Firmware Upgrade The 480i phone uses a TFTP server to download con Þ guration Þ les and Þ rmware. The TFTP server should be ready and be able to accept connections anonymously (without a requirement for a user name and password). See Appendix B for info...

21 Model 480i SIP Admin Guide Firmware Upgrade Figure 1 Figure 2

Model 480i SIP Admin Guide 22 Troubleshooting Troubleshooting This section describes solutions to some most commonly occurring problems. Why does my phone display “Application missing”? If you have experienced networking issues while the phone was downloading the application from the TFTP server, it...

23 Model 480i SIP Admin Guide Troubleshooting How to set the 480i phone to factory default? From the 480i phone: 1. Press the £ button to enter the Options List. 2. Select option 10. Phone Status to enter the Phone Status options list. 3. Select option 4. Factory Default . 4. Enter the administrator...

Model 480i SIP Admin Guide 24 Appendix A: Configuring the 480i at the Asterisk Appendix A: Configuring the 480i at the Asterisk IP PBX The following con Þ guration illustrates how to create a user with an extension to make and receive calls using the Asterisk as the PBX. This con Þ guration is de Þ ...

25 Model 480i SIP Admin Guide Appendix A: Configuring the 480i at the Asterisk After this is de Þ ned in the “sip.conf” Þ le, some information has to be entered in the “extensions.conf” Þ le present in the same directory as the “sip.conf” Þ le. The following de Þ nition in the Þ le under the [sip]se...

Model 480i SIP Admin Guide 26 Appendix B: Sample Configuration Files Appendix B: Sample Configuration Files This section consists of the sample con Þ guration Þ les necessary to con Þ gure the 480i phones. The general format is similar to con Þ guration Þ les used by several Unix-based programs. Any...

27 Model 480i SIP Admin Guide Appendix B: Sample Configuration Files # DHCP Setting# ============ dhcp: 1 # DHCP enabled. # DHCP: # 0 = false, means DHCP is disabled.# 1 = true, means DHCP is enabled. # Notes: If DHCP is disabled, the following network settings will # have to be con Þ gured manually...

Model 480i SIP Admin Guide 28 Appendix B: Sample Configuration Files # SIP registrar and Proxy Server Settings# ======================================= #sip proxy ip: # IP of proxy server.#sip proxy port: 5060 # 5060 is set by default.#sip registrar ip: # IP of registrar.#sip registrar port: 5060 # ...

29 Model 480i SIP Admin Guide Appendix B: Sample Configuration Files # Softkey Settings# ================ # Softkeys can be set either server wide or unique to each phone. # Setting softkeys as line/call appearances should be done in the# “<mac>.cfg” Þ le, since these are unique to each phone....

Model 480i SIP Admin Guide 30 Appendix B: Sample Configuration Files softkey3 type: speeddialsoftkey3 label: “CallFwdOn”softkey3 value: *72 softkey4 type: speeddialsoftkey4 label: “CallFwdOff”softkey4 value: *73 softkey5 type: speeddialsoftkey5 label: “DND On”softkey5 value: *78 softkey6 type: speed...

33 Model 480i SIP Admin Guide Appendix B: Sample Configuration Files # Explanation of Settings with Line 1 as Example# ============================================== #sip line1 auth name: # SIP Registrar request authorization name.#sip line1 password: # SIP Registrar request passcode.#sip line1 user...

37 Model 480i SIP Admin Guide Limited Warranty Limited Warranty Aastra Telecom warrants this product against defects and malfunctions during a one (1) year period from the date of original purchase. If there is a defect or malfunction, Aastra Telecom shall, at its option, and as the exclusive remedy...