Page 2 - SAVE THESE INSTRUCTIONS; IMPORTANT SAFETY INSTRUCTIONS
This symbol is to alert you to important operating or servicing instructions that may appear inthe user's manual. Always follow basic safety precautions when using this product to reduce therisk of injury, fire, or electrical shock. When using this product, basic safety precautions should always be ...
Page 3 - INTERFERENCE INFORMATION: PART 15 OF FCC RULES; to the telephone equipment.; FCC REGULATIONS CONTINUED; Connection and use with the nationwide telephone network:; FCC REGULATIONS
6. Programming/testing emergency numbers: When programming emergency numbers and/or making test calls to emergencynumbersA. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up. B. Perform such activities in the off-peak hours, such as early morning or l...
Page 4 - cord for desk use; Card; BATTERY CAUTIONARY INSTRUCTIONS; The EPA certified RBRC
BE-3872 PARTS CHECKLIST 6 In Use/ Low Batt. Mute MEM 2.4 GHz 8 7 1. Handset 2. Base 3. AC power adapter 6. Quick start card 5. 7-foot line cord for desk use QUICK START GUIDE BE-3872 1. Install a 9V backup battery into the battery compartment, located on the base bottom. 2. Connect the telephone lin...
Page 5 - Handset
1. Volume Up/Down Key The key lets you adjust the handset volume. 2. In Use/Low Battery LED Lights (red) when line is in use. Flashes quickly when the phone rings. Flashessteadily when the phone is muted. Flashes slowly when the battery is low. 3. Talk T The T key is used to access the telephone lin...
Page 6 - Base; LOCATION OF CONTROLS AND FEATURES
7. New Message LED Flashes when new messages have been left on the answering machine. 8. Two Digit Counter Display Displays the number of messages stored in the answering machine. Alsodisplays various other information about the base and answering machine. 9. Stop Key Any current function, such as p...
Page 7 - CHOOSING A LOCATION; Base Bottom View; Base Back View; Ring Count Switch
Do the following: • Choose the best location• Connect the phone• Choose the dialing mode Where you place the phone affects the reception quality of the handset: • Away from another cordless telephone• Place the base near an AC electrical outlet and near telephone line jack• Place the base away from ...
Page 8 - Wall Mounting; Wall Mounting Instructions:; Connecting the Base; Use only the supplied AC power adapter connect it to a continuous; Handset Ringer Volume; TELEPHONE SETUP; Ringer Switch
Tone/Pulse Switch 1. Select the dialing mode, either Tone or Pulse, by setting the switch on thebottom of the base unit. Note: Changes to the switch positionduring a call do not take affect untilthe call has ended. Tip: If you are unsure of the proper dialing mode, make a trial call with the switch ...
Page 9 - HEADSET AND DATA JACK; CHARGE; Battery Duration; For replacement batteries; you can contact Aastra Telecom customer support center; BATTERY INSTALLATION
The Data Jack The jack located on the side of thetelephone labeled "DATA" is a convenience jack. It is useful forconnecting a fax machine or modem whenthere is no telephone jack available forthat device. The Headset Jack The headset jack is located on the side of thehandset and is a standard...
Page 10 - IN USE; Press; SPEED DIALING; The; When you hear the phone ring:; BASIC OPERATION
The BE-3872 will store up to 10 speed dial numbers. Storing Phone Numbers 1. With the handset in the idle state, press l . The phone will beep and the IN USE LED will flash. 2. Dial the number you wish to store (up to 16 digits). Note: Press R to insert a dialing pause into the number. The pause las...
Page 11 - ANSWERING SYSTEM SETUP; Security Code; OTHER HANDSET FEATURES
Setting the Ring Count The ring count setting will prompt theBE-3872 to pick up an incoming callwith the answering machine after 2, 4,or TS (tollsaver 2/4) rings. There is aringer switch on the bottom of the base;adjust this switch to the number of ringsthat you desire. 2R: The unit will pick up aft...
Page 12 - Setting the Announce Mode; Setting the Remote Access Code; OGM
Setting the Announce Mode There are three different answering modes that the BE-3872 can be set to:normal (ICM) answering mode, answer only mode, and answer off. Setting the Answering System Off: When the answering machine is set off, the answering system will not pick upuntil the phone rings 10 tim...
Page 13 - In Answer Only mode, no messages will be recorded.; Answer Off; Two-Digit Message Counter Display; ANSWERING SYSTEM OPERATION; Base Volume Control; An
Answering Calls with Answer On To avoid unnecessary pauses due to hangups, and to save message capacity,your unit will automatically stop recording after seven seconds of silence. 1. When there is an incoming call the announcement will start. 2. After the announcement plays the BE-3872 will beep ind...
Page 14 - Playing Back New Messages; Push; Reviewing Messages
Deleting Messages Messages will be saved unless you delete them. To delete a single message: 1. While a message is playing, press [ Erase ]. The BE-3872 announces "Message[message number] erased." 2. The BE-3872 will announce the next message number and play the nextmessage or, if the messag...
Page 15 - REMOTE OPERATION; Recording a Memo
Remote Access The BE-3872 provides several remote functions, which allow you to access theanswering system functions from any touchtone telephone. The remote functionis ONLY recognized after a correct remote access code is received. 1. When the BE-3872 answers, after the outgoing message has finishe...
Page 17 - aastra; CARE AND MAINTENANCE; Aastra Telecom; the BE-3872 at its discretion; For Warranty Service; which vary from state to state.; WARRANTY
Your BE-3872 telephone has been designed to give years of trouble-freeservice. It is a sensitive electronic instrument. To assure its longevity, pleaseread the following maintenance instructions. 1. Keep the BE-3872 away from heat as high temperatures can shorten the life of the electrical component...
Page 18 - Remove This Page to Mark Wall; WALL MOUNT TEMPLATE; Screws needed for
34 For Support, Please Call 888-663-1505 Place this template on the wall. The location of the screws is indicated by the centers of the crossed lines. Fasten the screws leaving 3/16” of the screw extending from the wall. Remove This Page to Mark Wall 33 WALL MOUNT TEMPLATE Expansion Anchor #6 or #8 ...
