Page 3 - Contents; Welcome
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 iii C o n tents Contents Warranty, regulatory, safety, and copyright / licensing notices Warranty - Aastra Telecom, Inc. ........................................................................................ v . Warranty Limitation ...............................
Page 5 - copyright / licensing notices; Warranty Limitation
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 v Warranty, regulatory, safety, and copyright / licensing notices Warranty - Aastra Telecom, Inc. Aastra Telecom Inc. ("Aastra") warrants ("Warranty") to its customer that: (i) Aastra has good and marketable title to the Product at the time of de...
Page 6 - Aastra CNX Quick Installation and Setup Guide; Regulatory information; FCC Part 68 general information
Regulatory information vi ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Installation and Setup Guide Regulatory information U.S.A. requirements The AASTRA CNX has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications ...
Page 7 - THE AASTRA CNX HAS NO USER SERVICEBLE PARTS.; Canadian requirements; Canada CS-03 rules and regulations
Regulatory information ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 vii If you experience trouble with this equipment, please contact Aastra Telecom for repair and warranty information. If there is a problem with the network, the telephone company may request that you remove the equipment from the network ...
Page 8 - Canada CS-03 Règles et règlements
Regulatory information viii ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Installation and Setup Guide Repairs to certified equipment should be made by a supplier-designated representative. If you make repairs or alterations to this equipment, or if the equipment malfunctions, the telecommu...
Page 9 - European requirements; EC declaration of conformity
Regulatory information ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 ix European requirements EMI/EN 55 022 statement This certifies that the Aastra CNX Asterisk Network Switch is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC. Confor...
Page 10 - Safety warnings; General warnings
Safety warnings x ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Installation and Setup Guide Safety warnings General warnings The following safety warnings apply:• Mechanical hazards and electrical shock hazards are possible if you remove one or more of the modules. There are no operator-se...
Page 11 - Software licensing and copyright; Aastra CNX Service Level
Software licensing and copyright ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 xi Software licensing and copyright The Aastra CNX product consists of an Aastra designed hardware platform distributed with embedded Linux operating system and application software. This embedded software consists of multiple Aa...
Page 13 - Introduction; What does the Aastra CNX do?
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 xiii Welcome Introduction Congratulations!! You have purchased a highly functional, cost-effective, easy-to-use Aastra CNX Conference Network Switch for use in your network. The Aastra CNX is easy to install and operate, and provides a comprehensive set of secur...
Page 14 - What is in the Aastra CNX shipping package?; “Aastra CNX Installation and
Introduction xiv ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Installation and Setup Guide What is in the Aastra CNX shipping package? The Aastra CNX is carefully and securely packaged within the shipping container. Upon opening the shipping package, inventory the contents to be sure there...
Page 15 - Procedures; References; Aastra CNX Conference Network Switch Documentation
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 1 Aastra CNX Installation and Setup Procedures Procedures Introduction This section provides quick installation and setup procedures for installing and starting up the Aastra CNX Conference Network Switch. This section also provides a list of additional parts th...
Page 16 - Preparing for the hardware installation; What you need for a single installation; Prepare for hardware installation; Check the shipping contents
Procedures 2 ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Installation and Setup Guide Preparing for the hardware installation What you need for a single installation One Aastra CNX unitOne AC power cableOne CompactFlash memory cardOne set of rack mounting brackets with six (6) Phillips he...
Page 17 - Installing the Aastra CNX in a rack; Install the Aastra CNX in a rack
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 3 Aastra CNX Installation and Setup Procedures Installing the Aastra CNX in a rack Warning: Before you install the Aastra CNX unit in a rack, ensure that the rack is sturdy and well secured. Caution: The operating environment must provide unobstructed...
Page 18 - Connecting to the console port; Local connection; Connect to the console
Procedures 4 ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Installation and Setup Guide Connecting to the console port To connect a local PC or terminal:a. Attach the 9-pin male DB-9 connector on the serial cable to the female console port on the rear panel of the Aastra CNX.b. Attach the 9...
Page 19 - Connecting the network cables; Connect network cables
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 5 Aastra CNX Installation and Setup Procedures Connecting the network cables T1/E1 Connect the RJ-48C T1/E1 cable(s) to the RJ-48C T1/E1 port(s) on the rear panel of the Aastra CNX . Ethernet Connect the RJ-45 Ethernet UTP cable(s) to the RJ-45 10/100...
Page 20 - Connecting the AC power cable; Ground the chassis; Connect the power cable
Procedures 6 ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Installation and Setup Guide Connecting the AC power cable Ground the chassis a. Locate the 3-hole, female, power receptacle on the rear of the chassis. b. Plug the male, 3-prong connector on the power cable into the power receptacl...
Page 21 - Starting up and checking the Aastra CNX; Apply power to the Aastra CNX; Alarm Indicators; Startup and check the Aastra CNX
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 7 Aastra CNX Installation and Setup Procedures Starting up and checking the Aastra CNX Apply power to the Aastra CNX To start up the Aastra CNX, insert the CompactFlash card into slot 1 of the unit and apply power from the power source. Starts diagnos...
Page 22 - Configuring the network settings; Requirements; Configure the network settings
Procedures 8 ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Installation and Setup Guide Configuring the network settings Requirements The following is required before you configure the Aastra CNX for the first time: • The Aastra CNX must physically be connected to your console using an RS-2...
Page 23 - Step Action
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 9 Aastra CNX Installation and Setup Procedures (1) Run network and time configuration Use the following procedure to initially configure the network settings on the Aastra CNX hardware. Step Action 1 After first-time power up of the CNX, the following...
Page 29 - Notes
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 15 Aastra CNX Installation and Setup Procedures 17 Enter up to four NTP servers in your network, and press <Enter>. For example: NTP Server #1: [pool.ntp.org]: 192.167.2.11 ↵ NTP Server #2: [pool.ntp.org]: 192.167.2.12 ↵ NTP Server #3: [pool.ntp...
Page 30 - Using the Aastra CNX GUI via the Web; To begin using the Aastra CNX GUI via the Web interface:; For configuration details (System Administrators only)
Procedures 16 ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Installation and Setup Guide Using the Aastra CNX GUI via the Web Using the Aastra CNX GUI via the Web 8 To begin using the Aastra CNX GUI via the Web interface: Important: The JRE allows you to use the Aastra CNX graphical user in...
Page 32 - Aastra CNX Conference Network Switch; Installation and Setup Guide
Aastra CNX Conference Network Switch Installation and Setup Guide Printed in the USA ATP-CNX-020Aastra CNX Release 1.2, Document Revision 01.06July 2005
