Bradley HN200 - Manual
This Installation Manual covers an ADA-compliant recess-mounted shower (model HN200), focusing on its design, compliance standards, and essential assembly requirements for commercial or institutional use. The document highlights key topics like safety precautions, component specifications–including valve and seat positioning dimensions–and detailed plumbing steps, including rough-in piping, hoses, wall anchors, and mounting hardware. It also addresses maintenance for stainless steel parts, such as cleaning routines to prevent corrosion, while noting that brand names are provided only for reference.
Table of Contents:
- Page 1 – Installation Overview and Table of Contents
- Page 2 – Pre-installation Information and Warranty Details
- Page 3 – Component Dimensional Specifications
- Page 4 – Rough-in Piping Installation Procedure
- Page 5 – Plumbing Connections and Hardware Installation
- Page 6 – Shower Seat and Curtain Rod Mounting
- Page 7 – Cleaning and Maintenance Instructions
- Page 8 – Repair Parts Identification
ADA Compliant HN200
Recess-Mounted
Shower with
• Equa Flo™
• Accu-Zone™ Infrared
Control
• Thermostatic Control
• Single Valve
• Air Metering Valve
• Touch-Time™ or
• Touch Time™ w/Battery
215-1189 Rev. F; EN 02-342
Page 1 of 8
P.O. Box 309, Menomonee Falls, Wi 53052-0309
TEL. 1-800-BRADLEY
FAX (262) 251-5817
http://www.bradleycorp.com
Read the entire installation manual to ensure proper
installation of your HN200 shower.
This manual covers all of the HN200 variations and
options available, including shower seat and curtain
installation. Simply omit the steps which do not apply
to the unit you are installing.
Valve Left/Seat Right version is shown throughout
this manual. Valve Right/Seat Left is opposite.
Plumbing contractor shall be responsible for
installing shower face plate at the correct height to
meet accessibility requirements.
This installation manual and parts list should be filed
by the owner’s maintenance department.
IMPORTANT
Table of Contents
Pre-Installation Information . . . . . . . . . . . . 2
HN200 Components . . . . . . . . . . . . . . . . . . .3
HN200 Shower Stall Dimensions . . . . . . . .3
Installation Instructions . . . . . . . . . . . . . . 4-7
Cleaning Instructions . . . . . . . . . . . . . . . . . .7
Shower Seat Repair Parts . . . . . . . . . . . . . . .8
Shower Curtain Repair Parts . . . . . . . . . . . .8
HN200
(Valve Right/Seat Left shown,
Valve Left/Seat Right is opposite)
36" x 36" enclosure is not
provided as standard equipment
Installation
Instructions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Bradley
- Model
- HN200
- Document type
- Manual
- Language(s)
- English
- Pages
- 8
- File size
- 117.2 KB
- Format
Summary
Instructions for installing the ADA-compliant recess-mounted shower, including product features and manual structure.
Pre-installation details, safety cautions, compliance overview, component list (face plate, valve, seat, curtain), required supplies, and warranty terms for commercial/institutional purchasers.
Dimensional specifications for the HN200 shower components, including precise measurements for valve and seat positioning in inches and millimeters.
