Page 2 - SAFETY PRECAUTIONS; CAUTION
2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This Boxlight FP-95t has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit intothe power outlet. Do not try to defeat this safety feature. Intense light ...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
PROJECTOR (FRONT) PROJECTOR (SIDE) WALL 50cm 50cm 50cm 50cm Unplug this projector from wall outlet and refer servicing toqualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the projector.c. If the projecto...
Page 4 - TABLE OF CONTENTS
4 TABLE OF CONTENTS PAGE PAGE FEATURES AND DESIGN 5 INTRODUCTION 5 COMPATIBILITY 5 IMAGE RESOLUTION 5 AUTOMATIC MULTISCANNING SYSTEM 5 SCREEN MODE 5 MULTILANGUAGE 5 UNPACKING THE PROJECTOR 5 TRADEMARKS 5 INSTALLATION 6-9 NAME OF EACH PART OF THE PROJECTOR 6 SETTING-UP THE PROJECTOR 7 MOVING THE PROJ...
Page 5 - FEATURES AND DESIGN
The Boxlight FP-95t that combines powerful and sophisticated features with easy-to-use, intuitive controls. Built-inmultimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD) technology.The projector is ideal for high-performance business, tra...
Page 6 - FRONT OF THE PROJECTOR; BOTTOM OF THE PROJECTOR; NAME OF EACH PART OF THE PROJECTOR; INSTALLATION
6 EXHAUST VENT CAUTION HOT AIR!Air blown from the exhaust vent is hot.O b s e r v e t h e f o l l o w i n g w h e n h a n d l i n g y o u rprojector or choosing a location to install it. ● K e e p h e a t - s e n s i t i v e o b j e c t s a w a y f r o m t h eexhaust port. ● I f y o u s e t t h e p ...
Page 7 - SETTING-UP THE PROJECTOR
200" 154" 26.9' (8.2 m) 600" 462" 80.7' (24.6 m) 7 40" 77" 115" 154" 231" 308" 462" 600" 100" 150" 200" 300" 400" 760 mm 760 mm 100"SCREEN POSITIONING: ROOM LIGHT ● This projector is basically designed to project on a flat proje...
Page 8 - CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR; VENTILATION; MOVING THE PROJECTOR
8 Use the carry handle when moving the projector.Replace the lens cover and rotate the adjustable feet fullyclockwise. CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR ● Do not drop or give a shock to the projector, otherwise damage or malfunction may result. ● When carrying the projector, use a Bo...
Page 9 - POWER REQUIREMENTS
9 Your projector uses nominal input voltages of 100-120 VAC or 200-240 VAC. Theprojector automatically selects the correct input voltage. The projector is designedto work with single-phase power systems having a grounded neutral conductor. Toreduce the risk of electrical shock, do not plug into any ...
Page 10 - SIDE OF THE PROJECTOR (CONNECT THE COMPUTER); CONNECTING THE PROJECTOR; TERMINAL OF THE PROJECTOR
10 SIDE OF THE PROJECTOR (CONNECT THE COMPUTER) COMPUTER INPUT-1 TERMINAL (ANALOG HDB 15-PIN)Used to connect a computer to the projector. COMPUTER INPUT-1 TERMINAL (DIGITAL MDR 20-PIN)Used to connect a computer to the projector. COMPUTER INPUT-2 JACKS (BNC TYPE x 5)Used to connect a computer to the ...
Page 11 - SIDE OF THE PROJECTOR (CONNECT THE VIDEO EQUIPMENT)
11 VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO R L (MONO) AUDIO VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO R L (MONO) AUDIO VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO R L AUDIO VIDEO IN-1 VIDEO IN-2 MONIT OR OUT 14 17 20 15 18 19 21 22 16 SIDE OF THE PROJECTOR (CONNECT THE VIDEO EQUIPMENT) VIDEO INPUT JACKS-1 (BNC TYPE x 3)Use...
Page 12 - CONNECTING THE COMPUTER; CONNECTING TO THE COMPUTER INPUT 1 TERMINAL (ANALOG HDB 15-PIN)
–––––––– ADB –––––––––––––––––––––––––––––––––––––––––––––––– GND –––––––––––––––––––––––– Serial Port ADB Port 123456789 101112 PS/2 Port T x D –––––––––––––––––––––––––––––––––––––––– READY –––––––– GND –––––––––––––––––––––––– –––––––– CLK DATA –––––––––––––––––––––––––––––––––––––––– GND –––––––...
Page 13 - CONNECTING TO THE MONITOR OUTPUT TERMINAL (ANALOG HDB 15-PIN)
These jacks will contain the audio information of the selected program source being viewed on the screen (Computer 1,Computer 2, Video 1 or Video 2). If you have selected program source Computer 2 the audio signal connected to theComputer 2 audio input jack will be available at the audio monitor out...
Page 14 - CONNECTING AN IBM-COMPATIBLE DESKTOP COMPUTER
14 USB 1 AUDIO 1 R ANALOG ANALOG RGB COMPUTER OUT COMPUTER IN-2 COMPUTER IN-1 R G B H V L (MONO) (MONO) CONTROL PORT 1 USB 2 R/C JACK SERIAL PORT AUDIO 2 AUDIO OUT R L R L CONTROL PORT 2 DIGITAL COMPUTER OUTPUT(HDB15-PIN TYPE) COMPUTER MONITOR CABLE(NOT PROVIDED) COMPUTEROUTPUT(BNC TYPE x 5) SERIAL ...
Page 16 - CONNECTING AN IBM-COMPATIBLE LAPTOP COMPUTER
16 USB 1 AUDIO 1 R ANALOG ANALOG RGB COMPUTER OUT COMPUTER IN-2 COMPUTER IN-1 R G B H V L (MONO) (MONO) CONTROL PORT 1 USB 2 R/C JACK SERIAL PORT AUDIO 2 AUDIO OUT R L R L CONTROL PORT 2 DIGITAL SERIALPORTOUTPUT COMPUTER COMPUTER OUTPUT (DB15-PIN TYPE) SERIAL PORTINPUT PS/2 PORTINPUT AUDIO CABLE(NOT...
Page 17 - For this information, contact to your authorized dealer.
USB 1 AUDIO 1 R ANALOG ANALOG RGB COMPUTER OUT COMPUTER IN-2 COMPUTER IN-1 R G B H V L (MONO) (MONO) CONTROL PORT 1 USB 2 R/C JACK SERIAL PORT AUDIO 2 AUDIO OUT R L R L CONTROL PORT 2 DIGITAL Before using with digital connection, install (Plug in) GraphicAccelerator PC card into card bus slot of the...
Page 18 - CONNECTING A MACINTOSH DESKTOP COMPUTER
USB 1 AUDIO 1 R ANALOG ANALOG RGB COMPUTER OUT COMPUTER IN-2 COMPUTER IN-1 R G B H V L (MONO) (MONO) CONTROL PORT 1 USB 2 R/C JACK SERIAL PORT AUDIO 2 AUDIO OUT R L R L CONTROL PORT 2 DIGITAL 123456 ON 18 CONNECTING THE PROJECTOR CONTROL PORTOUTPUT 1 or 2 COMPUTER MONITOR CABLE(NOT PROVIDED) COMPUTE...
Page 19 - CONNECTING A MACINTOSH POWERBOOK COMPUTER
19 USB 1 AUDIO 1 R ANALOG ANALOG RGB COMPUTER OUT COMPUTER IN-2 COMPUTER IN-1 R G B H V L (MONO) (MONO) CONTROL PORT 1 USB 2 R/C JACK SERIAL PORT AUDIO 2 AUDIO OUT R L R L CONTROL PORT 2 DIGITAL 123456 ON COMPUTER ADB PORTINPUT ADB PORTINPUT VGA/MAC ADAPTER(PROVIDED) AUDIO CABLE (NOT PROVIDED) AUDIO...
Page 20 - CONNECTING THE VIDEO EQUIPMENT; CONNECTING TO THE VIDEO INPUT JACKS (1 and 2) BNC TYPE x 3
20 Connect to the video outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other AVequipment. Connect video output from AV equipment to these jacks using the BNC cables. The video input can be connected 3 types of signals; “COMPOSITE VIDEO", "Y/C SEPARATE VI...
Page 21 - VIDEO EQUIPMENT
21 VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO R L (MONO) AUDIO VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO R L (MONO) AUDIO VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO R L (MONO) AUDIO VIDEO IN-1 VIDEO IN-2 MONIT OR OUT VIDEO EQUIPMENT Video Cassette Recorder DVD Player Video Disc Player SatelliteTV Tuner MONITOR AUDIOINPUT AUD...
Page 22 - FRONT INDICATORS; BEFORE OPERATION; CONTROLS AND INDICATORS
22 MEMU MODE AUTO IMAGE NORMAL SELECT VOLUME ZOOM FOCUS LENS SHIFT ON-OFF 5 6 9 7 12 11 10 13 14 8 15 TOP CONTROLS FRONT INDICATORS FRONT INDICATORS TOP CONTROLS READY LAMP LAMP REPLACE WARNING TEMP. 1 2 3 4 BEFORE OPERATION CONTROLS AND INDICATORS
Page 24 - LASER POINTER button; FRONT; OPERATION OF THE REMOTE CONTROL; WIRELESS REMOTE CONTROL UNIT
LASER POINTER button This remote control emits a laser beam light as the LaserPointer from the Laser Light Window.When the LASER POINTER button is pressed, laser light goeson: when the button is released, light goes off.Laser light is emitted with the RED light which tells the laserbeam being emitte...
Page 27 - WIRELESS/WIRED REMOTE CONTROL UNIT
WIRED REMOTE JACKWhen using the wired remote control, connect the remotecable to this jack. COMPUTER SELECT BUTTONUsed to select computer mode.(Computer 1 or Computer 2 Input) VIDEO SELECT BUTTONUsed to select video mode. (Video 1 or Video 2 Input) POWER ON/OFF BUTTONUsed to turn projector on or off...
Page 29 - DIRECT OPERATION; CONTROL THE PROJECTOR
ADJUST ITEM 29 The projector has two types of operation: DIRECT OPERATION and MENU OPERATION. DIRECT OPERATION allows youto operate the projector by using one button without showing the MENU. In MENU OPERATION mode, you display menuswhere you can adjust the projector's settings. Follow the instructi...
Page 30 - MENU OPERATION
COLOR SYSTEM WIRELESS REMOTE CONTROL WIRELESSREMOTE CONTROL ADJUST ITEM MODE SELECT WIRELESSREMOTE CONTROL SOUND SOUND VOLUMETREBLEBASSBUILT-IN SP.SOUND MUTE WIRELESS/WIREDREMOTE CONTROL MENUPOINT LEFT/RIGHT SELECTPOINT UP/DOWN SELECT MENUPOINT LEFT/RIGHT SELECTPOINT UP/DOWN SELECT MENU POINT (LEFT/...
Page 32 - TO TURN ON THE PROJECTOR; TO TURN OFF THE PROJECTOR; TURNING ON/OFF THE PROJECTOR; BASIC OPERATION
32 Connect the projector to a source (Computer, VCR, Video Camera, Video Disc Player, etc.) using the appropriateterminals on the side of the projector (See "CONNECTING THE PROJECTOR" section on pages 10-21). Connect the projector's AC power cord into a wall outlet and turn the MAIN ON/OFF s...
Page 35 - MODE SELECT
MEMU NORMAL SELECT SELECTBUTTON 35 MENU FREEZE/NO SHOW NORMAL SELECT D.ZOOM In MENU OPERATION mode, you can adjust the projector. You can use the TOP CONTROL OF THE PROJECTOR or theREMOTE CONTROL UNIT. You can select a mode from MAIN MENU display among computer 1, computer 2, video 1, video 2. 1. Pr...
Page 36 - SOUND ADJUSTMENT
36 SOUND ADJUSTDISPLAY LANGUAGESETTING DISPLAY MAIN MENU DISPLAY MAIN MENU DISPLAY You can adjust the sound volume, treble, bass levels and Built-in SP., Sound Mute ON/OFF switch in the MENU display. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/R...
Page 37 - VIDEO MODE; VIDEO SOURCE SELECT
37 VIDEO SOURCEDISPLAY MAIN MENU DISPLAY 1. Connect the video equipment to the PROJECTOR and turn the projector on first. 2. Set MODE SELECT to "VIDEO MODE". 3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 4. Press the POINT LEFT/RIGHT BUTTON(s) to select VIDEO SOU...
Page 38 - PICTURE IMAGE ADJUSTMENT
38 IMAGEADJUST DISPLAY TABLE OF PICTURE IMAGE ADJUSTMENT COLOR TINT WHITE BALANCE (R/G/B) CONTRAST BRIGHTNESS SHARPNESS 0 63 0 63 63 63 31 0 63 0 0 0 DECREASES INCREASES DECREASES INCREASES MORE PURPLE MORE GREEN LIGHTER DEEPER DARKER BRIGHTER SOFTER SHARPER MAIN MENU DISPLAY Picture adjustments hav...
Page 39 - PICTURE SCREEN ADJUSTMENT
39 SCREEN ADJUSTDISPLAY MAIN MENU DISPLAY This projector has the Wide function, which enables you to view a wider video image. WIDE functionThis projector is able to project not only a normal video image (with 4 x 3 aspect ratio), but also a wider video image bycompressing 4 x 3 image. This feature ...
Page 40 - PC ADJUSTMENT; COMPUTER MODE; COMPUTER SYSTEM SELECT
40 XGA 1 X XX X X XX X X X X COMPUTERSYSTEMDISPLAY CURRENT MODEDISPLAY MAIN MENU DISPLAY This projector is adjustable to different types of computer display signals based on VGA, SVGA, XGA, SXGA or UXGA (See"COMPATIBLE COMPUTER SPECIFICATIONS" on the next page). If you set MODE SELECT to ...
Page 41 - COMPATIBLE COMPUTER SPECIFICATIONS
41 O N - S C R E E NDISPLAY RESOLUTION H-Freq.(kHz) V-Freq.(Hz) Specifications are subject to change without notice. NOTE: Basically this projector can accept the signal from all computers with the above mentioned V, H-Frequency and less than 200 MHz of Dot Clock. COMPUTER MODE COMPATIBLE COMPUTER S...
Page 42 - AUTO IMAGE FUNCTION
42 AUTO IMAGE SETTINGDISPLAY MAIN MENU DISPLAY The Auto image function is provided to automatically adjust Fine sync., Total dots and Screen position for most computers. NOTE: This auto image function will be skipped when the incoming signal is digital. 1. Press the MENU BUTTON and the MAIN MENU DIS...
Page 44 - PICTURE POSITION ADJUSTMENT
44 POSITION SETTINGDISPLAY MAIN MENU DISPLAY 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select POSITION and press the SELECT (REAR CLICK) BUTTON. Another dialog box POSITION SETTING DISPLAY will appear. 3. Press the POINT DOW...
Page 48 - MODE FREE
OK ? Yes No 630 1056 47 4 Stored 1 Stored 48 MAIN MENU DISPLAY PC ADJUSTMENT DISPLAY MODE FREE The Mode free function is provided to confirm or clear the parameter data produced by PC ADJUST. 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUT...
Page 50 - OTHER FUNCTION SETTING
This Projector is designed for connecting with USB Port of the computer or peripheral equipment that is to be standard. When this function is in the " " (Mouse) position, you control the pointer of the computer used the projector's wireless remote control unit. When this function is in the &...
Page 51 - REMOTE CONTROL CODE CHANGE (Mode 1 or Mode 2)
51 SETTINGDISPLAY MAIN MENU DISPLAY 1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear. 2. Press the POINT LEFT/RIGHT BUTTON(s) to select SETTING and press the SELECT (REAR CLICK) BUTTON. Another dialog box SETTING DISPLAY will appear. 3. Press the POINT DOWN BUTTON and a red ...
Page 52 - LAMP AGE
52 MAIN MENU DISPLAY SETTINGDISPLAY The Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset the lampreplacement monitor timer by using this function. NOTE: Do not reset the LAMP REPLACEMENT MONITOR TIMER, except after the lamp is replaced. 1. Pre...
Page 53 - RECOMMENDATION; APPENDIX; MEINTENANCE; TEMPERATURE WARNING INDICATOR
53 The removable air filter prevents dust from accumulating on the surface of the projection lens and projection mirror. Shouldthe air filter become clogged with dust particles, it will reduce the cooling fan's effectiveness and may result in internal heatbuild up and reduce the life of the projecto...
Page 54 - LAMP REPLACEMENT
54 Follow these steps to replace the lamp assembly. 1. Turn off the projector and allow the projector to cool thoroughly. 2. Disconnect the AC cord from the projector. 3. Remove 2 screws with a screwdriver and remove the lamp cover. 4. Remove 2 screws with a screwdriver and pull out the lamp assembl...
Page 55 - TROUBLESHOOTING; CLEANING THE LENS
Problem: No power. Image is out of focus. Try these Solutions: ● Plug the projector into an AC outlet. ● Turn the MAIN ON/OFF switch to ON. ● Press the POWER ON/OFF switch to ON. ● Be sure the READY INDICATOR light is ON. ● Wait one minute after the projector is turned OFF before turning the project...
Page 56 - SERVICE
No sound. 56 Problem: Check Reverse L/R feature.(See "OTHER FUNCTION SETTING" section on pages 50 ~ 51). Picture is L/R Reversed. Check Reverse T/B feature.(See "OTHER FUNCTION SETTING" section on pages 50 ~ 51). Picture is T/B inverted. Check Display feature.(See "OTHER FUNCTION...
Page 57 - TECHNICAL SPECIFICATIONS
57 TECHNICAL SPECIFICATIONS Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Number of Pixels Color System Scanning Frequency Projection Image Size (Diagonal) Horizontal Resolution Projection Lens Motorized Lens Shift Throw Distance Projection Lamp AV Input Jacks Computer Audio Inpu...
Page 58 - BOXLIGHT
Printed in JapanPart No. 610 281 4019 (1AA6P1P2024-- M6VE) LIMITED WARRANTY BOXLIGHT CORPORATION ("BOXLIGHT") warrants that each Boxlight FP-95t ("the Product") sold hereunder willconform to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty...
