Bosch ZLX 8P G2 EU - User Manual
Bosch ZLX 8P G2 EU – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Stacking full-range systems with subwoofers; NL4 Pin Configuration; Used; Combinations
- Page 3 – Troubleshooting; Passive loudspeakers; Problem
- Page 4 – Powered loudspeakers
- Page 6 – QuickSmart; INPUT 1; and; INPUT 2; for at
- Page 7 – Technical data
- Page 10 – Dimensions
- Page 12 – Appendices; Warranty infomation; Number
- Page 13 – OUTPUT list
- Page 16 – INPUT list; INPUT DSP control menu for MIXER mode
- Page 17 – INPUT BT
- Page 18 – Regulatory information; FCC information; IMPORTANT
- Page 20 – MT
- Page 21 – Certifications
- Page 22 – 특정소출력 무선기기(무선데이터통신시스템용 무선기기
- Page 23 – TDRA - UNITED ARAB Emirates; Open Source Software licenses; Components overview
- Page 26 – Accepting Warranty or Additional Liability.; END OF TERMS AND CONDITIONS; APPENDIX: How to apply the Apache License to your work.
- Page 27 – QTIL Firmware
- Page 28 – QTIL Audio
- Page 41 – Notices; Copyright and disclaimer
- Page 42 – Importers; 博世(上海)安保系统有限公司
- Page 43 – 上海市长宁区虹桥临空经济园区,福泉北路333号; EU
- Page 45 – Mexico
- Page 48 – Bosch Security Systems, LLC
ZLX-G2 Full-range loudspeaker
Recommended configurations | en
41
Bosch Security Systems, LLC
User manual
2023-10 | Draft09 | F.01U.418.090
!
Caution!
Do not exceed the maximum load rating of the amplifier.
Amplifier Load (per Output Channel)
# of Speakers
Nominal
Minimum
1
8 Ohms
7.2 Ohms
2
4 Ohms
3.6 Ohms
3
2.7 Ohms
2.4 Ohms
4
2 Ohms
1.8 Ohms
9.2.2
Using full-range systems as stage monitors
The configuration includes:
–
Multiple ZLX-8-G2, ZLX-12-G2 or ZLX-15-G2 loudspeakers in monitor position.
–
Dynacord L1800FD amplifier programmed with the appropriate speaker settings from
SONICUE.
Input A
Input B
Output A
Output B
NL4 Pin Configuration
Pin 1+ and 1-
Used
Pin 2+ and 2-
Not used
!
Caution!
Do not exceed the maximum load rating of the amplifier.
Amplifier Load (per Output Channel)
# of Speakers
Nominal
Minimum
1
8 Ohms
7.2 Ohms
2
4 Ohms
3.6 Ohms
3
2.7 Ohms
2.4 Ohms
4
2 Ohms
1.8 Ohms
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Bosch ZLX 8P G2 EU
Summary
42 en | Recommended configurations ZLX-G2 Full-range loudspeaker 2023-10 | Draft09 | F.01U.418.090 User manual Bosch Security Systems, LLC 9.2.3 Stacking full-range systems with subwoofers Possible configurations:– ZLX-12-G2 loudspeaker with EKX-15S subwoofer. – Dynacord L1800FD amplifier with 35 Hz...
ZLX-G2 Full-range loudspeaker Troubleshooting | en 43 Bosch Security Systems, LLC User manual 2023-10 | Draft09 | F.01U.418.090 10 Troubleshooting 10.1 Passive loudspeakers Problem Possible Cause(s) Action 1. No sound Amplifier Verify all the electronics are on, the signal routing iscorrect, the sou...
44 en | Troubleshooting ZLX-G2 Full-range loudspeaker 2023-10 | Draft09 | F.01U.418.090 User manual Bosch Security Systems, LLC 10.2 Powered loudspeakers Problem Possible Cause(s) Action 1. No sound Amplifier Verify all the electronics are on, the signal routing iscorrect, the source is active; the ...
