Page 3 - Table of Contents
LE10 Radio Receiver Table of Contents | en 3 Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11 Table of Contents 1 Safety instructions 5 1.1 General safety instructions 5 1.2 Environmental conditions 5 1.3 Electrostatic Discharge (ESD) 5 2 Product information 6 2.1 General descriptio...
Page 4 - Technical data
4 en | Table of Contents LE10 Radio Receiver F.01U.278.517 | V2.0 | 2012.11 User Manual Bosch Security Systems 6.2 Normal mode (modes 1 and 2) 16 6.2.1 Activation of a transmitter in normal mode 16 6.3 Dementia (mode 3) 17 6.3.1 Activation of a MIYS37L Wristband Transmitter 17 6.3.2 Detection of a M...
Page 5 - Safety instructions; General safety instructions; ESD
LE10 Radio Receiver Safety instructions | en 5 Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11 1 Safety instructions 1.1 General safety instructions Installation and initial operation should only be carried out by trained service personnel. 1.2 Environmental conditions The LE10 Rad...
Page 6 - Product information; General description; Compatible transmitters
6 en | Product information LE10 Radio Receiver F.01U.278.517 | V2.0 | 2012.11 User Manual Bosch Security Systems 2 Product information 2.1 General description The LE10 Radio Receiver is designed to receive radio signals from different Bosch radio transmitters at the frequency of 434.01 MHz. After re...
Page 7 - Main applications
LE10 Radio Receiver Product information | en 7 Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11 2.3 Main applications LE10 Radio Receiver as small stand alone call system After receiving a radio signal from a programmed radio transmitter, the relay output switches a siren or a lamp ...
Page 8 - Mode Name
8 en | Product information LE10 Radio Receiver F.01U.278.517 | V2.0 | 2012.11 User Manual Bosch Security Systems 4 Dementia with Accompany This mode allows to connect the LE10 Radio Receiver to a wired emergency call system, in which the Accompany function can be implemented. It will wait 10 seconds...
Page 9 - Installation; Unpacking; Power supply with the RJ12 power socket; Power supply connected to a wired installation
LE10 Radio Receiver Installation | en 9 Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11 3 Installation 3.1 Unpacking The LE10 Radio Receiver is carefully packed for transportation. The components contained in the box are protected, but should be handled with care. Store the packagi...
Page 10 - Wall installation
10 en | Installation LE10 Radio Receiver F.01U.278.517 | V2.0 | 2012.11 User Manual Bosch Security Systems 3.3 Wall installation You can fasten the LE10 Radio Receiver on a smooth wall surface using two screws. Installation cables should be placed inside the cable channels on the bottom. Figure 3.1 ...
Page 11 - Connection compartment; Connecting ports
LE10 Radio Receiver Connection compartment | en 11 Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11 4 Connection compartment 4.1 Connecting ports To open the device: – hold the LE10 Radio Receiver in one hand, facing you, so that you can see the Bosch logo and the two LEDs. – grab t...
Page 12 - Mode selection; Mode indication after power on; Example
12 en | Connection compartment LE10 Radio Receiver F.01U.278.517 | V2.0 | 2012.11 User Manual Bosch Security Systems 4.2 Mode selection Modes 1 to 9 can be selected by operating switches 1 to 5 of the 5-digits micro switch S3. 4.2.1 Mode indication after power on – When the power supply is connected...
Page 13 - Programming; Enter programming mode; To start programming
LE10 Radio Receiver Programming | en 13 Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11 5 Programming 5.1 Enter programming mode To enter programming mode, press simply button T1 for the desired time. See Section 4.1 Connecting ports, page 11 . 5.2 Program a transmitter in modes 1,...
Page 14 - Delete a transmitter; Device behavior; Delete all transmitters; To start deleting
14 en | Programming LE10 Radio Receiver F.01U.278.517 | V2.0 | 2012.11 User Manual Bosch Security Systems 5.3 Delete a transmitter To start deleting: – Press button T1 for min. 5 seconds and max. 10 seconds. Device behavior – The green LED stays permanently on, then after 5 seconds blinks fast 5 tim...
Page 15 - Program a door address in modes 3 or 4; Programming in modes 6 or 7
LE10 Radio Receiver Programming | en 15 Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11 5.5 Program a door address in modes 3 or 4 You can program a door address stored in a MIYS37L Wristband Transmitter with Locating function, in modes 3 or 4. To start programming – Press button T...
Page 16 - Operation; Standby mode; Standby with no transmitter programmed; Standby with at least one transmitter programmed; Activation of a transmitter in normal mode
16 en | Operation LE10 Radio Receiver F.01U.278.517 | V2.0 | 2012.11 User Manual Bosch Security Systems 6 Operation 6.1 Standby mode The LE10 Radio Receiver enters standby mode when the power supply is connected. Both relays are off. See Section 4.2.1 Mode indication after power on, page 12 . 6.1.1 ...
Page 17 - Device behavior when the battery is replaced in a transmitter; Activation of a MIYS37L Wristband Transmitter
LE10 Radio Receiver Operation | en 17 Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11 – Relay 2 switches on permanently until the battery is replaced and the transmitter is activated again. Device behavior when the battery is replaced in a transmitter – The green LED stays permanen...
Page 19 - Activation of a programmed transmitter
LE10 Radio Receiver Operation | en 19 Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11 6.4 Dementia with Accompany (mode 4) 6.4.1 Activation of a MIYS37L Wristband Transmitter Device behavior – The green LED stays permanently on. When a MIYS37L transmitter is activated, a 10-second ...
Page 20 - Activation of a transmitter in the reception range; Daily messages in modes 1, 2 or 5; Daily message with battery-low signal
20 en | Operation LE10 Radio Receiver F.01U.278.517 | V2.0 | 2012.11 User Manual Bosch Security Systems 6.5.2 Activation of a programmed transmitter with a battery-low message or with a new battery The behavior of the device is the same as in Section 6.2.1 Activation of a transmitter in normal mode,...
Page 21 - Reset of a battery-low indication with button T1
LE10 Radio Receiver Operation | en 21 Bosch Security Systems User Manual F.01U.278.517 | V2.0 | 2012.11 6.7.2 Reset of a battery-low indication with button T1 Device behavior – The green LED stays permanently on. – The red LED is already blinking every 10 seconds. Upon pressing button T1 min. 1 seco...
Page 22 - Standby
22 en | Operation LE10 Radio Receiver F.01U.278.517 | V2.0 | 2012.11 User Manual Bosch Security Systems Battery-low indication: – Relay 2 switches on for 2 seconds. – The red LED flashes for 2 seconds, then blinks 1 second every 10 seconds. For all MIYS35 and MIYS37 transmitters, the battery low sta...
