Page 3 - Table of Contents; Getting Started
AutoDome 700 Series IP PTZ Camera Table of Contents | en 3 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Table of Contents 1 Getting Started 6 1.1 Powering On 6 1.2 Establishing AutoDome Control 6 2 Using the AutoDome 700 Series 7 2.1 Overview of Features 7 2.2 System Requir...
Page 5 - Troubleshooting Guide; User Command Table
AutoDome 700 Series IP PTZ Camera Table of Contents | en 5 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 5 Troubleshooting Guide 66 5.1 VG5 AutoDome Operation and Control 66 5.2 VG5 700 Series AutoDome Video and Control 66 5.3 VG5 Series AutoDome Audio 68 6 User Command Tabl...
Page 6 - Powering On; Establishing AutoDome Control; Bosch Security Sys. AutoDome
6 en | Get ting Started AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. 1 Getting Started Install and wire the AutoDome according to the VG5 AutoDome Installation Manual . A typical system includes an ethernet connection, a video management sy...
Page 7 - Using the AutoDome 700 Series; Overview of Features
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 7 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 2 Using the AutoDome 700 Series The AutoDome 700 Series transmits PTZ control commands and images over a TCP/IP network. It also allows users to configure the...
Page 8 - Connecting the AutoDome 700 Series to the PC
8 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. If you choose to use a computer running Microsoft Internet Explorer or any of the Bosch software, the computer must conform to the following minimum requireme...
Page 9 - Configuring the AutoDome 700 Series Camera
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 9 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Figure 2.1 AutoDome 700 Series System Configuration 2.4 Configuring the AutoDome 700 Series Camera To operate the camera in your network you must assign it a ...
Page 10 - Changing the Network Settings; Using the Configuration Manager; trusted sites
10 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. 2.4.1 Changing the Network Settings The AutoDome 700 Series has a default IP address of 192.168.0.1. To change the IP address or any network settings, you ca...
Page 11 - Configuring Intelligent Tracking; Intelligent Tracking Operation; A user manually selects an object in the live image area to track
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 11 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 8. Click the Set button to save the settings. 9. Launch another instance of Microsoft Internet Explorer. 10. Type the original IP address followed by /reset ...
Page 12 - Guidelines for Implementing Intelligent Tracking; The Livepage
12 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. 2.5.2 Guidelines for Implementing Intelligent Tracking Factors such as the viewing angle and unwanted motion (from trees, for example) may interfere with Int...
Page 15 - Entering a Keyboard Control Command; To Enter a Keyboard Control Command:
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 15 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 2. If you want to view a detailed log, click the icon in the top right-hand corner of the relevant field. A new window will open. 2.6.1 Entering a Keyboard C...
Page 16 - Using Intelligent Tracking
16 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. 2. Click the Show Shot button. 2.6.2 Using Intelligent Tracking Intelligent Tracking continuously follows an individual or an object. Intelligent Tracking op...
Page 17 - Using Special Functions; Autopan; Saving Snapshots; Recording Video Sequences; Livepage
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 17 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 – Actively tracked object in motion are identified in the video by a blue outline. – When an object in motion is lost, a blue diamond appears designating the...
Page 18 - Processor Load
18 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. 2.9 Processor Load If the AutoDome 700 Series is accessed via the Web browser, you will see the processor load indicator in the top left of the window next t...
Page 19 - Recordings page; Controlling playback
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 19 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 2.10 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page (the Recordings link is only visible if a storage medi...
Page 21 - VG5 Audio Connections; Audio Line Input Specifications; Wire Specifications; Contact
AutoDome 700 Series IP PTZ Camera VG5 Audio Connections | en 21 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 3 VG5 Audio Connections The audio version of the AutoDome 700 Series has one audio input for line signals. The audio signals are transmitted one-way and in-sync with...
Page 23 - Configuring the AutoDome 700 Series; Basic Mode: Device Access
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 23 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 4 Configuring the AutoDome 700 Series The SETTINGS page provides access to the configuration menu, which contains all the unit's parameters arranged in...
Page 26 - Basic Mode: Recording
26 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. – Low bandwidth Target bit rate: 700 kbps Maximum bit rate: 1500 kbps Encoding interval: 30.00 ips – DSL Target bit rate: 400 kbps Maximum bit rate: 50...
Page 27 - Basic Mode: System Overview
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 27 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Storage medium 1. Select the required storage medium from the list. 2. Click the Start button to start the recording immediately. 4.7 Basic Mode: Syste...
Page 29 - Display Stamping
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 29 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 1. First check whether the correct time zone is selected. If it is not correct, select the appropriate time zone for the system, and click the Set butt...
Page 30 - Advanced Mode: Web Interface
30 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. Display milliseconds If necessary, you can also display milliseconds. This information can be useful for recorded video images; however, it does increa...
Page 31 - Livepage Functions
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 31 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Website language Select the language for the user interface here. Company logo Enter the path to a suitable graphic if you want to replace the manufact...
Page 32 - Logging
32 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. Show event log The event messages are displayed along with the date and time in a field next to the video image. Show system log The system messages ar...
Page 33 - Encoder Profile
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 33 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 SC Settings Click the Default button to restore all camera settings to their original defaults. SC Data Click the default button to clear all prepositi...
Page 35 - Encoding Interval; Expert Settings; Default; Encoder Streams
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 35 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Encoding Interval The figure selected here determines the interval at which images are encoded and transmitted. The image rate in ips (images per secon...
Page 36 - Privacy Masks
36 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. – H.264 MP SD Select this setting when using software decoders, PTZ and for rapid movements in the images. CABAC: on CAVLC: off GOP structure: IP I-fra...
Page 37 - Camera Settings
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 37 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 a. Click the View Control link. b. Use the PTZ controls to view the scene. 2. Select the privacy mask number to apply to the scene. The preview window ...
Page 39 - Lens Settings
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 39 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 – Auto (default): The camera switches out of Night Mode after the ambient light level reaches a pre-defined threshold. Night Mode Threshold Adjusts the...
Page 40 - PTZ Settings
40 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. Maximum Zoom Speed Controls the zoom speed. The default setting is Medium. Zoom Polarity Capability to reverse the operation of the zoom button on the ...
Page 41 - Tilt Limits; Diagnostics; preposition tour
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 41 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Tilt Limits Click the Reset button to clear the upper tilt limit. Tour A / Tour B Starts and stops the recording of a recorded (guard) tour. The AutoDo...
Page 42 - To define and edit an individual scene:; Sectors; Sector
42 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. the highest scene number in the tour. The tour displays each scene for a specified dwell time before advancing to the next scene. By default, all scene...
Page 45 - Recording Profiles
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 45 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 5. Check the boxes for the Overwrite older recordings option to specify which older recordings can be overwritten once the available memory capacity ha...
Page 46 - Retention Time
46 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. Standard profile From this field, you can select the encoder profile to be used for recording (see Section 4.19 Encoder Profile, page 33 ). Pre-alarm T...
Page 47 - Recording Schedule
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 47 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Retention time Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to S...
Page 48 - Recording Status
48 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. 1. Click the Start button to activate the recording scheduler. 2. Click the Stop button to deactivate the recording scheduler. Running recordings are i...
Page 50 - VCA
50 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. Auto-connect Select the On option to automatically re-establish a connection to one of the previously specified IP addresses after each reboot, after a...
Page 51 - Analysis type
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 51 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Analysis type Select the required analysis algorithm. By default, only MOTION+ is available – this offers a motion detector and essential recognition o...
Page 54 - Audio Alarm
54 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. 4. If necessary, click Select All to select the entire video frame for monitoring. 5. Right-click any fields you wish to deactivate. 6. Click OK to sav...
Page 55 - Alarm Task Editor
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 55 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Mail server IP address Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail Transfer Protocol). Outgoing e-mails are s...
Page 56 - Alarm Rules; Note; Advanced Mode: Interfaces
56 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. 2. Enter new scripts in the Alarm Task Editor field or change existing scripts in line with your requirements. 3. When you are finished, click the Set ...
Page 57 - Advanced Mode: Network
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 57 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Idle State Specify either Open or Closed idle state. Operations Mode Select one of the following modes for operation: Bistable, 0.5 s, 1 s, 5 s, 10 s, ...
Page 58 - Detailed Settings
58 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. Gateway address If you want the unit to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Ot...
Page 60 - Advanced
60 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. Force registration now You can force the registration by transferring the IP address to the DynDNS server. Entries that change frequently are not provi...
Page 61 - Multicast
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 61 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 RTSP port If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554. Select Off to deactivat...
Page 62 - FTP Posting
62 en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. A special IP address (class D address) must be configured for multicast operation in a multicast-enabled network. The network must support group IP add...
Page 63 - IPv4 Filter
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 63 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 – Date/time suffix The date and time are automatically added to the file name. When setting this parameter, ensure that the unit's date and time are al...
Page 65 - Licenses
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 65 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Configuration You can save configuration data for the AutoDome 700 Series on a computer and then load saved configuration data from a computer to the u...
Page 67 - Problem
AutoDome 700 Series IP PTZ Camera Troubleshooting Guide | en 67 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Problem Solution No Network Connection – Check all network connections – Ensure that the maximum distance between any two Ethernet connections is 100 m (328 ft) or l...
Page 68 - VG5 Series AutoDome Audio; Audio Connections with VG5 700 Series AutoDome
68 en | Troubleshooting Guide AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. 5.3 VG5 Series AutoDome Audio The following diagram illustrates the path for audio transmissions between a microphone/ AutoDome and a computer that plays the audio. ...
Page 70 - Poor Audio
70 en | Troubleshooting Guide AutoDome 700 Series IP PTZ Camera F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc. If O.K., then: – Check all network connections. – If the video is clear and contains no distortion, then the network connections are probably not the source of audio...
Page 72 - Index; Symbols
AutoDome 700 Series IP PTZ Camera Index | en 72 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08 Index Symbols /reset 11 A activating the recording 47 activation key 65 alarm 30 alarm e-mail 54 alarm message 30 alarm rule 56 alarm sensors 46 audio activating 21 cable 69 connect...