Bosch 576253 - User Manual
Bosch 576253 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Regulatory Module Integration Instructions for Module PN 576253.
This module has been granted modular approval for mobile applications. OEM integrators for host
products may use the module in their final products without additional FCC / IC (Industry Canada)
certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must
be obtained. (Note: This module is not being sold commercially to any OEM, Bosch
Automotive Service Solutions will exclusively utilize this module within our products.)
•
The host product with the module installed must be evaluated for simultaneous
transmission requirements.
•
The users manual for the host product must clearly indicate the operating requirements
and conditions that must be observed to ensure compliance with current FCC / IC RF
exposure guidelines.
•
To comply with FCC / IC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-
only exposure condition must not exceed 3.2dBi at 2.4GHz and 3.4dBi at 5.8GHz (Peak
Gain).
•
A label must be affixed to the outside of the host product with the following statements:
This device contains FCCID: 2AHLA-576253.
This equipment contains equipment certified under ICID: 4811A-576253.
The final host / module combination may also need to be evaluated against the FCC Part 15B
criteria for unintentional radiators in order to be properly authorized for operation as a Part 15
digital device.
If the final host / module combination is intended for use as a portable device (see classifications
below) the host manufacturer is responsible for separate approvals for the SAR requirements
from FCC Part 2.1093 and RSS-102.
UNII Band Operation:
UNII devices that operate within 5.15-5.25 GHz are to be restricted to indoor operations to reduce
any potential for harmful interference to co-channel MSS operations.
FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either
absence of information to transmit or operational failure. These provisions are not intended to
preclude transmission of control or signaling information or the use of repetitive codes used by
certain digital technologies to complete frame or burst intervals. Applicants shall include in their
application for equipment authorization a description of how this requirement is met.
Meeting FCC 15.407(c):
Data transmission is always initiated by software, which is then passed down through the MAC,
through the digital and analog baseband, and finally to the RF transceiver. Several special
packets (ACKs, CTS, PSPoll, etc) are initiated by the MAC. These are the only ways the digital
baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet.
Therefore, the transmitter will be on only while one of the aforementioned packets are being
transmitted.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
