Bosch 24SBI - Manual
Bosch 24SBI – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Clamp cable here
- Page 3 – PROGRAMMER OPERATING INSTRUCTIONS; PROGRAMME STEP
- Page 5 – PERMAN ENT ON; The channel number will flash for 3 seconds and then stay on.; PERMAN ENT OFF; To cancel, set left slide switch back to AUTO
- Page 6 – Conditions of Sale, a copy of which may be obtained on application
15SBi & 24SBi SYSTEM BOILERS
TWIN CHANNEL DIGITAL
PROGRAMMER INSTALLATION &
OPERATING INSTRUCTIONS
General information is given in the users instruction leaflet despatched with the
appliance and/or on the lighting instruction plate fitted to the appliance.
THESE INSTRUCTIONS APPLY IN THE UK ONLY THESE INSTRUCTIONS
ARE TO BE LEFT WITH THE USER OR AT THE APPLIANCE
M T W Th F S Su
P
DAY HR MIN ADV
Reset
I
AUTO O
RUN DHW CH
Set
8 : 3 7
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Gas Safety (Installation and Use) Regulations 1998: All gas appliances must be installedby a competent person, in accordance with the above regulations. Failure to install theappliance correctly could lead to prosecution. The manufacturers notes must not betaken, in any way, as overriding statutor...
2 TO SET PRESENT TIME AND DAY Set right switch to RUN.Press HR & MIN buttons together (until colon stops flashing) After 15 seconds the colon will start flashing again signifying the settings cannot be changed. Repeat this step if you still wantto set time and day. Press DAY button until arrow p...
4 To advance HW mode, press ADV once.To advance CH mode, press ADV twice. When a channel is ‘advanced’ the symbol appears at the bottom right of the display, and the channel numberwill change to on (or off ). PERMAN ENT ON Right switch must be in the RUN position.Set left slide switch to I. For perm...
