Bogen OPS1 - Manual
Bogen OPS1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Product Description; Thank you for choosing NEAR
- Page 3 – Product Diagrams; .Tap Selection Switch; OPS; Safety Cable Suspension Point; Package Contents; ) Orbit Pendant Speaker
- Page 4 – Installation; Selecting Power Levels; IMPORTANT
- Page 5 – Speaker Wiring; DAISY CHAINING
- Page 6 – SYSTEMS; Accessory; CK
- Page 7 – Specifications
- Page 8 – Warranty; Bogen's liability arising out of
© 2003 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2090-0
1
A 0302 Printed in Taiwan.
Orbit Pendant Speaker
OPS1
Installation and Use Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Product Description Thank you for choosing NEAR ® Orbit Pendant Loudspeakers. You have purchased one of the finest pendant loudspeakers available today, the NEAR Model OPS 1 . Please familiarize yourself with this product by reading and reviewing the followingdescriptions and diagrams.All NEAR produ...
Product Diagrams OPS 1 Front Drawing 1 .Tap Selection Switch 2. Coaxial Driver Assembly 3. Grille Retention Slot 4. Bass Tuning Vent (x2) 5. Perforated Steel Grille OPS 1 Rear Drawing 1 . Snap-Lock Input Connector 2. Suspension Points (x3) 3. Safety Cable Suspension Point Package Contents ( 1 ) Orbi...
Installation If the power level is known, then select it using the front-mounted selector switchprior to installing the OPS 1 . See section Selecting Power Levels . SUSPENSION CABLE ASSEMBLY 1 . Screw nuts onto the eye bolts all the way to the flange. 2. Screw in eye bolts with captured cable sec- t...
