Bogen CA19 - Manual
Bogen CA19 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Description
The Bogen Model CA
1
9 is a momentary, rocker-type call switch
designed for use with Bogen Multicom 2000
®
Communication
Systems. T he CA
1
9 will facilitate single-push call-in on the same
station and wiring as the Bogen enhanced staff stations (MCESS
or MCWESS) set to Level 4, 5, or 6. T he CA
1
9 requires just two
conductors back to the system head-end. T he CA
1
9 may also be
used for staff stations set to Levels
1
, 2, or 3. A ny station using
the CA
1
9 must have an associated speaker.
Note
Requires special version Multicom Software V6.3 (MCPCA25W63).
Operation
When pushed once and released, the CA
1
9 will send two square
wave-pulses simulating the telephone going off-hook and on-
hook twice. This will establish a logged call into the designated
administrative station. The switch may also be used to initiate an
emergency call if pressed twice with a one-second interval
between presses.
Note
The CA
1
9 will operate only when the associated staff or enhanced
staff handset in is the on-hook position.
Caution
Observe color coding. The red wire connects to the station
annunciator point while the black wire connects to the station
ground point.
Installation
The CA
1
9 is designed for flush-mounted installation in a single-
gang box. The figure below illustrates the proper wiring
connections. Important: The shield must not be grounded at any
point other than the system head-end.
8
OHMS
CA19
PRESS
TO CALL
BLACK
RED
TO
CONSOLE
GROUND
ANNUNCIATOR
SPEAKER
SPEAKER
FIGURE - MODEL CA19, CONNECTING DIAGRAM
T 725
TRANSFORMER
ENHANCED
STAFF
STATION
JUNCTION
BOX
1/4 W
1/8 W
1/2 W
1 W
2 W
COM
4W
ROOM SPEAKER
BLU
GRN
YEL
ORN
RED
BRN
BLK
CALL-IN SWITCH
Model CA19
50 Spring Street, Ramsey, NJ 07446 U.S.A.
201-934-8500; FAX: 201-934-9832
www.bogen.com
Printed in U.S.A.
0011
2000 Bogen Communications, Inc.
54-5958-01R2
Specifications subject to change without notice.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
