Bogen CA17 - Manual

Bogen CA17

Bogen CA17 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
Page: / 1
Loading the manual

The Bogen Model CA

1

7 Call Switch is a momentary-push switch designed

for use with PI/SI35A Intercom Systems in conjunction with the SCR25A.
When pushed and released once, a signal is sent to the MCP35A via the
SCR25A call-in module to annunciate the call-in on the SBA225. The room
must be equipped with a 25-volt speaker.

The CA

1

7 is designed for flush-mounting in a standard single-gang outlet

box; connections are made as illustrated in the figure below.

EMERGENCY CALL SWITCH

Model CA17

Model CA

1

7 Connecting Diagram

50 Spring Street, Ramsey, NJ 07446 U.S.A.
201-934-8500; FAX: 201-934-9832
www.bogen.com

Printed in U.S.A. 0301

©

2003 Bogen Communications, Inc.

54-5919-01R3
Specifications subject to change without notice.

From MCP35A +12V Terminal.
Connect only the +12V Terminal to this point.
Do not connect a ground lead to this point.
Use second pin to jump +12V DC
to additional SCR25A panels.

The Bogen Model CA

1

7 Call Switch is a momentary-push switch designed

for use with PI/SI35A Intercom Systems in conjunction with the SCR25A.
When pushed and released once, a signal is sent to the MCP35A via the
SCR25A call-in module to annunciate the call-in on the SBA225. The room
must be equipped with a 25-volt speaker.

The CA

1

7 is designed for flush-mounting in a standard single-gang outlet

box; connections are made as illustrated in the figure below.

EMERGENCY CALL SWITCH

Model CA17

Model CA

1

7 Connecting Diagram

50 Spring Street, Ramsey, NJ 07446 U.S.A.
201-934-8500; FAX: 201-934-9832
www.bogen.com

Printed in U.S.A. 0301

©

2003 Bogen Communications, Inc.

54-5919-01R3
Specifications subject to change without notice.

From MCP35A +12V Terminal.
Connect only the +12V Terminal to this point.
Do not connect a ground lead to this point.
Use second pin to jump +12V DC
to additional SCR25A panels.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Bogen Models

All Bogen Other