Bogen CA10A - Manual
Bogen CA10A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
CA
1
0A Call Switch
Model CA
1
0A is a 2-position room switch designed for use
with SBA-Series room selector panels. When the switch is
pressed, the annunciator lamp on the SBA-Series switchbank
illuminates, designating the calling station. When the switch is
released, the lamp remains illuminated until the call is
answered.
The switch is designed for flush mounting in a standard single-
gang outlet box. Refer to Figure
1
below and wire the switch
as follows:
1
. Connect the unshielded wire from the corresponding
annunciator terminal on the room selector panel to the red
wire of the CA
1
0A switch.
2. Connect the black wire to the speaker ground (shield of
speaker line).
CA
11
A Call Switch
Model CA
11
A is a 3-position switch providing annunciator call
and privacy control. The switch has two fixed positions, TALK
and PRIVACY. In the TALK position, the remote station has
normal, non-private operation. In the PRIVACY position, the
remote station cannot be monitored from the main console.
The CA
11
A also has a momentary PRESS TO CALL position.
When the switch is pressed, the annunciator lamp on the SBA-
Series room selector panel illuminates, designating the calling
station. When the switch is released, the lamp remains illumi-
nated until the call is answered.
The switch is designed for flush mounting in a standard single-
gang outlet box. Refer to Figure 2 below and wire the switch
as follows:
1
. Connect the unshielded wire from the corresponding
annunciator terminal on the room selector panel to the red
wire of the CA
11
A switch.
2. Connect the white wire to the center tap of the room
speaker line-matching transformer. This connection may be
made via the speaker cable shield, as shown in Figure 2.
3. Connect the black wire to the audio system ground at the
shield of the audio cable from the console, as shown in
Figure 2.
-
-
-
-
-
-
CALL SWITCHES
Models CA10A & CA11A
Figure
1
- Model CA
1
0A Connecting Diagram
Figure 2 - Model CA
11
A Connecting Diagram
50 Spring Street, Ramsey, NJ 07446 U.S.A.
201-934-8500; FAX: 201-934-9832
www.bogen.com
Printed in U.S.A. 0011
© 2000 Bogen Communications, Inc.
54-5972-01R2 0011
Specifications subject to change without notice.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
