Page 2 - CONTENT
www.blaupunkt.com BAC-PO-1414-Q11L 2 CONTENT IMPORTANT SAFEGUARDS ........................................................................................................................................................ 5 GETTING STARTED ..................................................................
Page 4 - PORTABLE AIR CONDITIONER; User Manual
www.blaupunkt.com BAC-PO-1414-Q11L 4 PORTABLE AIR CONDITIONER A1414L BAC-PO-1414-Q11L User Manual
Page 5 - IMPORTANT SAFEGUARDS; CAUTION; Do not pierce or burn this appliance.
www.blaupunkt.com BAC-PO-1414-Q11L 5 IMPORTANT SAFEGUARDS Read the user manual carefully before installation and use of this portable air conditioner. Please retain this user manual for product warranty and future reference. CAUTION 1. Do not attempt to accelerate the defrosting process or clean thi...
Page 7 - Appliance Transportation, Marking, and Storage; Equipment marking must be compliant with local regulations.
www.blaupunkt.com BAC-PO-1414-Q11L 7 21. This appliance can only be connected to a supply with a system impedance no more than 0.219Ω. In case necessary, please consult your utilities provider for systemimpedance information. 22. This appliance must be installed in accordance with national wiring re...
Page 8 - GETTING STARTED
www.blaupunkt.com BAC-PO-1414-Q11L 8 GETTING STARTED For better heating and cooling efficiency, follow the steps outlined below. 1) Extend the exhaust hose within a length of less than400 mm. The exhaust hose must be kept unblocked. 2) Keep a minimum distance of 500mm from theappliance's filter side...
Page 9 - CONGRATULATIONS; User-Friendly Sleep Mode
www.blaupunkt.com BAC-PO-1414-Q11L 9 THANK YOU FOR PURCHASING OUR HIGH-PERFORMANCE PROTABLE AIR CONDITIONER CONGRATULATIONS This air conditioner is designed and manufactured with the highest of standards and techniques. An additional remote control is provided to allow you to use the appliance in a ...
Page 10 - UNPACK THE APPLIANCE; Place the appliance in an upright position.; CONTENTS; Portable air conditioner appliance (1 pc)
www.blaupunkt.com BAC-PO-1414-Q11L 10 UNPACK THE APPLIANCE 1. Place the appliance in an upright position. 2. Cut the two packing straps. 3. Lift the outer carton slightly to release the appliance from the base. 4. Grip the handles on either of the appliance sides and carefully release it from the fo...
Page 11 - NAME OF PARTS
www.blaupunkt.com BAC-PO-1414-Q11L 11 NAME OF PARTS 1. Control panel 2. Remote control receiver 3. Adjustment dials 4. Adjustable air vent 5. Connection tube 6. Exhaust hose 7. Upwards drain hole 8. Cool air inlet 9. Cool air filter 10. Hot air inlet 11. Hot air filter 12. Downwards drain hole
Page 14 - COOLING; Air conditioner inside the room
www.blaupunkt.com BAC-PO-1414-Q11L Important: Allow air to flow freely out of the unit. In the cooling and heating modes it is possible to set the unit outside the cooled or heated room. In this configuration in a cooled/heated room the noise level of the unit will be much lower however the efficien...
Page 15 - Air conditioner outside the room
www.blaupunkt.com BAC-PO-1414-Q11L When using the unit outside the room, depending on whether you want to cool or heat the room, the exhaust hose must be connected accordingly: Cooling mode - Exhaust hose connected at the front of the unit and led to the inside of the room through the window kit Hea...
Page 16 - CONTROL PANEL & OUTLINE OF FUNCTIONS; KEY FUNCTION DESCRIPTIONS:; POWER; Turn appliance on/off
www.blaupunkt.com BAC-PO-1414-Q11L 1 6 CONTROL PANEL & OUTLINE OF FUNCTIONS : LED DISPLAY : POWER : MODE : TIMER : SLEEP : SWING I. KEY FUNCTION DESCRIPTIONS: (1) POWER (On/Off Key) : a. Standby mode (Default) b. Turn appliance on/off
Page 18 - SPEED
www.blaupunkt.com BAC-PO-1414-Q11L 1 8 The < > display will show the temperature on the screen. (3) TEMP. (Temperature and Humidity Dial) : a. COOLING/HEATING: Rotate the < > dial clockwise. The value increases by 1 /1 per ℃ ℃ scale. The maximum value is 30 /86 (25 /77 ). ℃ ℃ ℃ ℃ R...
Page 20 - SWING
www.blaupunkt.com BAC-PO-1414-Q11L 20 The < > indicator will light on. The temperature increases by 1 /2 after an hour and 2 /4 after ℃ ℃ ℃ ℃ 2 hours. After which, the temperature will remain unchanged. b. SLEEP function in HEATING mode: The < > indicator will light on. The tempe...
Page 22 - Temperature Display Switching (
www.blaupunkt.com BAC-PO-1414-Q11L 22 (2) SLEEP function in COOLING mode: The < > indicator will light on. The temperature increases by 1 /2 after an hour and 2 /4 after 2 hours. ℃ ℃ ℃ ℃ After which, the temperature will remain unchanged. (3) SLEEP function in HEATING mode: The < >...
Page 23 - Water Full Protection
www.blaupunkt.com BAC-PO-1414-Q11L 2 3 (3) The < > display will show <E1> if the indoor T-round thermistor malfunctions. All indicators will turn off and the appliance shuts down. After the problem is resolved, the appliance will resume to its previous operation. (4) The < > displa...
Page 24 - REMOTE CONTROL FUNCTION
www.blaupunkt.com BAC-PO-1414-Q11L 2 4 REMOTE CONTROL FUNCTION 1. POWER 2. FUNC 3. TIMER 4. AUTO 5. HI 6. MID 7. LOW 8. SLEEP 9. TEMP. 10. SWING On/Off switch “MODE” selector Hour configuration Automatic fan speed High fan speed Medium fan speed Low fan speed Night operation selector Temperature sel...
Page 25 - IMPORTANT MESSAGES
www.blaupunkt.com BAC-PO-1414-Q11L 2 5 IMPORTANT MESSAGES The appliance evaporates and distributes condensation through the exhaust hose. 1. In COOLING mode, the drain pipe does not need to be installed. Ensure the rubber caplocked on the drain hole when the appliance is in operation. 2. In HEATING ...
Page 26 - Air Filters; Use a vacuum cleaner with a brush.; Plastic Case; POWER SUPPLY; Ensure that the cable is connected to the correct power source.
www.blaupunkt.com BAC-PO-1414-Q11L 2 6 MAINTENANCE DISCONNECT THE POWER CORD BEFORE CLEANING. Air Filters Air filters are located at the left hand side of the appliance. Simply remove the filters by pulling the frame out through the direction indicated by the arrow. Condenser/Evaporator Use a vacuum...
Page 27 - The appliance is fitted with a special thermal cutoff device.; Troubleshooting; Servicing Information; Checks the area
www.blaupunkt.com BAC-PO-1414-Q11L 2 7 USE LOCATION 1. Place the appliance in a wide and ventilated location to ensure a smooth exhaustion. 2. Never place the appliance in a humid or wet location to avoid electric leak hazards. 3. Do not place the appliance in a sunlit corner to ensure the appliance...
Page 30 - Repairs to sealed components; Ensure that appliance is mounted securely.; Repair to intrinsically safe components
www.blaupunkt.com BAC-PO-1414-Q11L 30 2. Repairs to sealed components 1) During repairs to sealed components, all electrical supply must be disconnectedfrom the equipment being worked on prior to any removal of sealed covers, etc. If itnecessary to have an electrical supply to equipment during servi...
Page 32 - Removal and evacuation; Remove the refrigerant.; Charging procedures; Cylinders must be kept upright.
www.blaupunkt.com BAC-PO-1414-Q11L 32 7. Removal and evacuation Conventional procedures must be used when breaking into the refrigerant circuit tomake repairs or for any other purpose. Best practices must be followed sinceflammability is a consideration. The procedures below must be followed. Remo...
Page 33 - Label (if not already) the system when charging is complete.; Decommissioning; Isolate the system electrically.
www.blaupunkt.com BAC-PO-1414-Q11L 3 3 - Ensure that the refrigeration system is earthed prior to charging the system with refrigerant. - Label (if not already) the system when charging is complete. - Take extreme care not to overfill the refrigeration system. Pressure test the system with OFN prior...
Page 35 - Fuse parameters
www.blaupunkt.com BAC-PO-1414-Q11L 3 5 Recovery equipment should be in good working order, include clear instructions at hand, and shall be suitable for the recovery of flammable refrigerants. Additionally, a set of calibrated weighing scales should be available and in good working order. Hoses shou...
Page 36 - TROUBLESHOOTING; Code; Contact the service center.
www.blaupunkt.com BAC-PO-1414-Q11L 3 6 TROUBLESHOOTING Code Cause of Problem Solution E1 Electrical short on rubber temperature sensor and PCB Contact the service center. E2 Electrical short on copper temperature sensor and PCB Contact the service center. E4 Water plate is full Pull out the rubber s...
Page 37 - SPECIFICATION; Permissible Excessive Operating Pressure
www.blaupunkt.com BAC-PO-1414-Q11L 3 7 SPECIFICATION Model No. BAC-PO-1414-Q11L Power Source 220-240V-50Hz Rated Power (EN60335) Cooling Heating 1535W 1290W Cooling Capacity 4000W Heating Capacity 4000W Moisture Removed 70 Liters/day IP Class IP24 Refrigerant R290, 0.27kg Permissible Excessive Opera...
Page 38 - MODEL CODE BREAKDOWN; B – Blaupunkt
www.blaupunkt.com BAC-PO-1414-Q11L 3 8 MODEL CODE BREAKDOWN BAC-PO-1414-Q11L B AC PO 14 14 Q 11 L B – Blaupunkt AC – Air conditioner PO – Portable 14 – 14000 BTU heating capacity 14 – 14000 BTU cooling capacity Q – Balcony unit 11 – Internal number L - IP24/water splash protection