Page 3 - over an ADSL broadband connection.
Chapter 1 Introduction 1.1 Introducing the BiPAC 7202(G) Thank you for purchasing the BiPAC 7202(G) ADSL Router by Billion. Your new router is an all-in-one unit that combines an ADSL modem, ADSL router and Ethernet network switch to provide everything you need to get the machines on your network co...
Page 6 - Domain Name System Relay; to this router is forwarded to the real DNS on the outside network.; Virtual; computers. This provides an easy way to manage the local IP network.; Rich Packet Filtering
Domain Name System Relay Domain Name System (DNS) relay provides an easy way to map a domain name with a user-friendly name such as www.billion.com with an IP address. When a local machine sets its DNS server to the router’s IP address, every DNS conversion request packet from the PC to this router ...
Page 7 - SNMP allows convenient remote management of the router.; GUI; manage this product.; Firmware Upgradeable
This feature filters the packet based on IP addresses as well as Port numbers. Filtering packets to and from the Internet provides a higher level of security control. Static and RIP1/2 Routing An easy static routing table or RIP1/2 routing protocol supports routing capability. Simple Network Managem...
Page 9 - Important Notes; Warning; Package Contents
Chapter 2 Product Overview 2.1 Important Notes Warning Do not use the BiPAC 7202(G) in high humidity or high temperatures. Do not use the same power source for the BiPAC 7202(G) as other equipment. Do not open or repair the case yourself. If the BiPAC 7202(G) is too hot, turn off the power immediate...
Page 11 - RESET; Emergency/Failure Recovery Button
2.4The Rear Ports BiPAC 7202 3 4 1 2 BiPAC 7202G 4 3 5 1 2 Port Description 1 PWR Connect the supplied power adapter to this jack. 2 RESET After the router is powered on, press this recessed button using the end of paper clip or other small pointed object to reset the router or to restore it to fact...
Page 12 - admin; LAN
password will be reset to admin , and the modem will be accessible via its default IP address at http://192.168.1.254/ 3 LAN Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps. 4 ADSL (LUNE) Connect the s...
Page 14 - Before Configuration; and; uninstall; Any TCP/IP capable workstation can be used to communicate with or
Chapter 3 Installation You can configure the BiPAC 7202(G) router through the convenient and user-friendly interface of a web browser. Most popular operating systems such as Linux and Windows 98/NT/2000/XP/Me include a web browser as a standard application. 3.1 Before Configuration PCs must have a p...
Page 15 - Configuring a PC in Windows XP
Configuring a PC in Windows XP 1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window, click Properties . 4. Select Internet Protocol (TCP/IP) and click Propert...
Page 16 - Configuring a PC in Windows 2000
Configuring a PC in Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and Dial-up Connections . 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window click Properties . 4. Select Internet Protocol (TCP/IP) and click...
Page 17 - Configuring PC in Windows 98/Me
Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP ->NE2000 Compatible , or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automa...
Page 18 - Configuring PC in Windows NT4.0
Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and click OK . 16
Page 19 - Factory Default Settings; LAN Device IP Settings:; Attention
3.2 Factory Default Settings Before configuring the BiPAC 7202(G) router, you need to know the following default settings. Web Interface: Username: admin Password: admin LAN Device IP Settings: IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 ISP setting in WAN site: PPPoE DHCP Server: DHCP serv...
Page 20 - LAN and WAN Port Addresses; Enabled; Configuring with your Web Browser; ”, a user name and password window prompt appears.
3.3 LAN and WAN Port Addresses The parameters of LAN and WAN ports are preset at the factory. The default values are shown below. LAN Port WAN Port IP address 192.168.1.254 Subnet Mask 255.255.255.0 DHCP server function Enabled IP addresses for distribution to PCs 100 IP addresses continuing from 19...
Page 21 - Status
Chapter 4 Configuration Once you have logged on to your BiPAC 7202(G) ADSL Router via your web browser, you can begin to set it up according to your requirements. On the configuration homepage, the left navigation pane links you directly to the setup pages, which include: Status (ARP Table, Wireless...
Page 23 - Device Information; you change the router name.
Device Information Host Name: Provide a name for the router for identification purposes. Host Name lets you change the router name. System Up-Time: Records system up-time. 21
Page 24 - condition
Current time: Set the current time. See the Time Zone section for more information. Hardware Version: Chipset version Software Version: Firmware version LAN MAC Address: The LAN MAC address WAN MAC Address: The WAN MAC address Home URL: Connects to the Home Website. LAN IP Address: LAN port IP addre...
Page 30 - where the hacker comes from.
4.1.6 Security Log This screen displays security log information. If a hacker attacks your server, he is isolated by the firewall function and the router records related information. This helps you know where the hacker comes from. 28
Page 31 - For detailed instructions on configuring WAN settings, see the; WAN; section of this manual.; WAN – ISP; section of the interface, you can use the router’s PVC
4.2 Quick Start For detailed instructions on configuring WAN settings, see the WAN section of this manual. The information you need for the Quick Start wizard to get you online are your login (often in the form of username@ispname ), your password, and the encapsulation type. Your ISP can supply all...
Page 40 - If you check; DHCP Relay Agent; and click; Next; then you must enter the IP address of the; Apply; to enable
If you check DHCP Relay Agent and click Next then you must enter the IP address of the DHCP server which assigns an IP address back to the DHCP client in the LAN. Use this function only if advised to do so by your network administrator or ISP. Click Apply to enable this function. 38
Page 42 - Encapsulation method:; Select the encapsulation format, the default is LLC Bridged.; Obtain an IP address automatically via DHCP client; to enable the DHCP client; PPPoA Routed Connections; Enter the information provided by your ISP.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a single IP account, sharing the single IP address. If users on your LAN have public IP addresses and can access the Internet directly, the NAT function can be disabled. Encapsulation method: Sele...
Page 45 - A user-definable name for this connection.; Encapsulation method:; Select the encapsulation format, this is provided by your ISP.
and to automatically re-establish the PPPoE session when disconnected by the ISP. Connect to Demand: If you want to establish a PPPoE session only when there is a packet requesting access to the Internet (i.e. when a program on your computer attempts to access the Internet). Idle Timeout: Auto-disco...
Page 51 - Edit
If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to factory default settings. You may also reset your router to factory settings by pressing in the sm...
Page 53 - Firewall and Access Control; accessed from the Internet. See the; configuration section for more details on NAT.; Firewall; : This masks LAN users’ IP addresses, which are invisible to outside; Firewall Security and Policy (General Settings); : Inbound direction of Packet Filter rules
4.3.4 Firewall Firewall and Access Control Your router includes a full SPI (Stateful Packet Inspection) firewall for controlling Internet access from your LAN, as well as helping to prevent attacks from hackers. In addition to this, when using NAT (Network Address Translation) the router acts as a “...
Page 54 - Intrusion Detection; : Enable Intrusion Detection to detect, prevent, and log malicious; MAC Filter rules; : Prevents unauthorized computers; URL Filter; : Blocks PCs on your local network from unwanted websites.; section
prevent unauthorized computers or applications accessing your local network from the Internet. Intrusion Detection : Enable Intrusion Detection to detect, prevent, and log malicious attacks. MAC Filter rules : Prevents unauthorized computers accessing the Internet. URL Filter : Blocks PCs on your lo...
Page 55 - relationship among all filters is; “or”; operation, which means that the router checks these
4.3.4.1 Packet Filter Packet filtering enables you to configure your router to block specified internal/external users ( IP address ) from Internet access, or you can disable specific service requests ( Port number ) to /from Internet. This configuration program allows you to set up to 6 different f...
Page 58 - Select; Yes; from the drop down list box to enable MAC address filtering.; Action When Matched:; Select “Drop” or “Forward”.
Active: Select Yes from the drop down list box to enable MAC address filtering. Action When Matched: Select “Drop” or “Forward”. Log: Choose “Yes” if you wish to generate logs when the filer rule is applied to a packet. MAC Address: Enter the MAC addresses you wish to manage. Candidates: 56
Page 59 - not able to access network resources.
4.3.4.3 Intrusion Detection Check “Enable” if you wish to detect intruders accessing your computer without permission. The router automatically detects and blocks a DoS (Denial of Service) attack if a user enables this function. This kind of attack is not to access confidential data on the network; ...
Page 61 - For example, the URL
Active: Select Yes from the drop down list box to enable or disable the URL Filter feature. Always Block: Select to always check URL filter rules (i.e. at all hours of the day). Block from: Specify the time period to check URL filter rules (e.g. during work hours). Keywords Filtering: Allows blockin...
Page 63 - Quality of Service Introduction; QOS: Keeping Your Net Connection Fast and Responsive; QOS Setup; Please choose the; QOS; in the; Configuration; item of the left window as depicted below.
4.3.5 QoS (Quality of Service) Quality of Service Introduction If you’ve ever found your ‘net’ speed has slowed to a crawl because another family member is using a P2P file sharing program, you’ll understand why the Quality of Service features in Billion’s routers is such a breakthrough for home use...
Page 67 - Local Machine IPs; : The IP address values for Local LAN machines you want to control.; Remote Machine IPs; : The IP address values for Remote WAN machines you want to; Local Application Ports; : The Application port values for local LAN machines you want; Remote Application Ports; : The Application port values for remote machines you want; Schedule Time
Best Effort Best Effort (000000) Premium Express Forwarding (101110) Gold service (L) Class 1, Gold (001010) Gold service (M) Class 1, Silver (001100) Gold service (H) Class 1, Bronze (001110) Silver service (L) Class 2, Gold (010010) Silver service (M) Class 2, Silver (010100) Silver service (H) Cl...
Page 68 - QOS example for your Network; Connection Diagram; VoIP; ADSL Subscription Rate
QOS example for your Network Connection Diagram VoIP HTTP web browsing users FTP Server ADSL Subscription Rate Upstream: 256 kbps Downstream: 2048 Mbps Example QOS Plan :. Application IP or Ports Control Flow Data Rate Time Schedule VoIP User 192.168.0.1 Outgoing Minimal 20% with high priority for n...
Page 69 - VoIP application; catching VoIP packets as high priority.
Example QOS Setup VoIP application Voice is latency-sensitive application. Most VoIP devices are use SIP protocol and the port number will be assigned by SIP module automatically. Better to use fixed IP address for catching VoIP packets as high priority. 67
Page 71 - FTP Server Application; their files by using FTP.
FTP Server Application Some of companies will setup FTP server for customer downloading or home user sharing their files by using FTP. LAN to WAN direction: 69
Page 73 - HTTP Web Browsing; LAN to WAN direction:
HTTP Web Browsing You can control the internet web browsing by specify the HTTP 80 (8080 for some proxy server). LAN to WAN direction: 71
Page 74 - WAN to LAN direction:
Page 75 - configuration section of this manual for information on NAT.
4.3.6 Virtual Server In TCP/IP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be delivered to. Some ports have numbers that are pre-assigned to them by the IANA (the Internet Assigned Numbers Authority), and these ...
Page 78 - Protocol
In addition to specifying the port number used, you also need to specify the protocol used. The protocol is determined by the particular application. Most applications use TCP or UDP, however you can specify other protocols using the drop-down Protocol menu. Setting the protocol to “all” causes all ...
Page 81 - security options and device monitoring features.; Embedded Web Server:; The port number of the router’s embedded web server (for web-based
4.3.7.4 Device Management The Device Management advanced configuration settings allow you to control your router’s security options and device monitoring features. Embedded Web Server: HTTP Port: The port number of the router’s embedded web server (for web-based configuration uses. The default value...
Page 82 - SNMP Access Control
alternative if, for example, you are running a web server on a PC within your LAN. For Example: User A changes HTTP port number to 100 , specifies their own IP address of 192.168.1.55 , and sets the logout time to be 100 seconds. The router only allows User A access from the IP address 192.168.1.55 ...
Page 83 - SNMP Version: SNMPv2c and SNMPv3
from this IP address are sent SNMP Traps. SNMP V3: Specify a name and password for authentication, and define access rights from the identified IP address. Once authentication has succeeded, users from this IP address are able to view and modify data. SNMP Version: SNMPv2c and SNMPv3 SNMPv2c is the ...
Page 85 - Installing UPnP in Windows Example; Follow the steps below to install the UPnP in Windows Me.
Universal Plug and Play (UPnP): UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with control and data transfer between devices. UPnP offers many advantages for users running NAT routers through UPnP NAT Traversal, and on supported systems makes tasks such as po...
Page 87 - window and click Next.; Auto-discover Your UPnP-enabled Network Device; under Internet Gateway.
Step 5: In the Networking Services window, select the Universal Plug and Play check box. Step 6: Click OK to go back to the Windows Optional Networking Component Wizard window and click Next. Auto-discover Your UPnP-enabled Network Device Step 1: Click start and Control Panel. Double-click Network C...
Page 89 - Web Configurator Easy Access; Follow the steps below to access web configuration.
Step 6: Double-click on the icon to display your current Internet connection status. Web Configurator Easy Access With UPnP, you can access web-based configuration for the BiPAC 7202(G) without first finding out the IP address of the router. This helps if you do not know the router’s IP address. Fol...
Page 90 - IGMP; Internet Group Management Protocol; Enable
4.3.7.5 IGMP IGMP, known as Internet Group Management Protocol , is used to management hosts from multicast group. IGMP Forwarding: Accepting multicast packet. Default is set to Enable. IGMP Snooping: Allowing switched Ethernet to check and make correct forwarding decisions. Default is set to Enable...
Page 91 - Save Configuration to Flash; Save; to write your new configuration to FLASH.
4.4 Save Configuration to Flash After changing the router’s configuration settings, you must save all of the configuration parameters to FLASH to avoid losing them after turning off or resetting your router. Click Save to write your new configuration to FLASH. 89
Page 92 - Click; Restart; with option; Current Settings; to reboot your router (and restore your last
4.5 Restart Click Restart with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or if you have saved an incorrect configuration), select Factory Defau...
Page 93 - Problems starting up the router
Chapter 5 Troubleshooting If your ADSL Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service provider or Billion support. This can save you time and effort but if symptoms persist, consult your service provider. Problems sta...
Page 94 - Problems with the LAN Interface; Problem
Frequent loss of ADSL linesync (disconnections). Ensure that all other devices connected to the same telephone line as your router (e.g. telephones, fax machines, analogue modems) have a line filter connected between them and the wall socket (unless you are using a Central Splitter or Central Filter...
Page 95 - If you cannot resolve the problem after reading the; Contact Billion; AUSTRALIA
Appendix Support and Contact Information If you cannot resolve the problem after reading the Troubleshooting chapter, please contact the dealer where you purchased this product. Contact Billion AUSTRALIA http://www.billion.com.au ©2005 Billion Electric Co., Ltd. PC Range P/L. All Rights Reserved. WO...
