Page 2 - LED; CHAPTER 3: BASIC INSTALLATION; Table of Contents
T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s CHAPTER 1: INTRODUCTION .............................................................................................................. 3 I NTRODUCTION TO YOUR R OUTER ............................................................................
Page 3 - CHAPTER 5: TROUBLESHOOTING; LAN I; APPENDIX A: PRODUCT SUPPORT AND CONTACT INFORMATION; iii
Restart Router ................................................................................................................................. 42 User Management ........................................................................................................................... 43 Firewall ...
Page 4 - Chapter 1: Introduction; Introduction to your Router
VoIP/(802.11g) Broadband Firewall Router Chapter 1: Introduction Chapter 1: Introduction Introduction to your Router Welcome to the VoIP Broadband Firewall Router. The router is an “all-in-one” VoIP Broadband router, combining a Broadband router, Ethernet network switch and 2 ports for Voice over IP...
Page 5 - It is an easy way to remotely manage the router via SNMP.
VoIP/(802.11g) Broadband Firewall Router Chapter 1: Introduction Network Address Translation (NAT) Allows multi-users to access outside resources such as the Internet simultaneously with one IP address/one Internet access account. Many application layer gateway (ALG) are supported such as web browse...
Page 7 - Chapter 2: Installing the router; Chapter 2: Installing the Router; Important note for using this router; Warning; Do not use this router in high humidity or high temperatures.; Attention; Place this router on a stable surface.; CD-ROM containing the online manual
VoIP/(802.11g) Broadband Firewall Router Chapter 2: Installing the router Chapter 2: Installing the Router Important note for using this router Warning Do not use this router in high humidity or high temperatures. Do not use the same power source for this router as otherequipment. Do not open or rep...
Page 8 - The Front LEDs; Lit when power is ON.; WLAN
VoIP/(802.11g) Broadband Firewall Router Chapter 2: Installing the router The Front LEDs LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready. 3 WAN Lit when connected to an ADSL modem or Cable modem's Ethernet port well 4 – 6 LAN Port 1X — 3X (RJ-45 connector) Lit when connect...
Page 9 - The Rear Ports; Connect the supplied power adapter to this jack.; : After pressing the RESET button for more than 6 seconds,; : Port 3 can be either a LAN or Console port at a time but not; : Port 3 can be either a LAN or Console port at a time but not; Connect RJ-11 cable to this port when connecting to an analog
VoIP/(802.11g) Broadband Firewall Router Chapter 2: Installing the router The Rear Ports 5 6 1 3 The Ethernet Port # 3 can be used as a console port. You need a special console tool which already includes in the package to connect with LAN port 3 and PC’s RS-232 port (9-pin serial port). 7 2 4 Port ...
Page 10 - Connect RJ-11 cable to this port when connecting to the
VoIP/(802.11g) Broadband Firewall Router Chapter 2: Installing the router 7 LINE Connect RJ-11 cable to this port when connecting to the telephone wall jack. Cabling The most common problem associated with Ethernet is bad cabling. Make sure that all connected devices are turned on. On the top of the...
Page 11 - Chapter 3: Basic Installation; and the subnet mask is; uninstall; any
VoIP/(802.11g) Broadband Firewall Router Chapter 3: Basic Installation 10 Chapter 3: Basic Installation The router can be configured with your web browser. A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc. The produc...
Page 12 - Connecting Your Router; Connect the ATA to a; ATA Mode
VoIP/(802.11g) Broadband Firewall Router Chapter 3: Basic Installation 11 Connecting Your Router 1. (a) ATA Mode: Connect the ATA to a WAN (Connect to ADSL modem/router). (b) Broadband Router Mode: Connect the Router to a LAN (Local Area Network) and WAN (Connect to Cable or ADSL modem). 2. Power on...
Page 13 - Configuring PCs in Windows in Window XP
VoIP/(802.11g) Broadband Firewall Router Chapter 3: Basic Installation 12 Configuring PCs in Windows in Window XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click Network Connections . 2. Double-click Local Area Connection . (See Figure 3.1) 3. In the LAN Area Con...
Page 14 - Configuring PCs in Windows 2000
VoIP/(802.11g) Broadband Firewall Router Chapter 3: Basic Installation 13 Configuring PCs in Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click Network and Dial-up Connections . 2. Double-click Local Area (“LAN”) Connection . (See Figure 3.5) 3. In the LAN Ar...
Page 16 - Configuring PC in Windows NT4.0
VoIP/(802.11g) Broadband Firewall Router Chapter 3: Basic Installation 15 Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double-click Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . ( See Figure 3.12) 3. Select...
Page 17 - Factory Default Settings; cycle the device again.; Device LAN IP settings:; enabled
VoIP/(802.11g) Broadband Firewall Router Chapter 3: Basic Installation 16 Factory Default Settings Before configuring your, you need to know the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “ admin ” and “ adm...
Page 18 - Information from your ISP; DHCP
VoIP/(802.11g) Broadband Firewall Router Chapter 3: Basic Installation 17 Information from your ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) to find out what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP (Fi...
Page 19 - Configuring with your Web Browser; Go; ”, a user name and password window prompt will appear.; The default username and password; respectively
VoIP/(802.11g) Broadband Firewall Router Chapter 3: Basic Installation 18 Configuring with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.1.254 , and click “ Go ”, a user name and password window prompt will appear. The default username and p...
Page 20 - Chapter 4: Configuration; (provides user interface in English and French languages).
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Chapter 4: Configuration At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including: Status - ARP Table - Wireless Association Table (Wireless Router On...
Page 21 - Status; Firewall – MAC Address; Wireless Association Table (Wireless Router Only); Routing Table
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Status ARP Table This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way of determining the MAC address ...
Page 22 - DHCP Table
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Cost: The number of hops counted as the cost of the route. RIP Routing Table Destination: The IP address of the destination network. Netmask: The destination netmask address. Gateway: The IP address of the gateway that this route will...
Page 23 - Email Status; Advanced; section of this manual for details on this function.; VoIP Status; VoIP; section for more details.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Email Status Details and status for the Email Account you have configured the router to check. Please see the Advanced section of this manual for details on this function. VoIP Status Here you can check details and status of VoIP Acco...
Page 24 - Event Log; Configuration – Firewall; section of the interface. Please see the; Firewall
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Event Log This page displays the router’s Event Log entries. Major events are logged to this window, such as when the router’s ADSL connection is disconnected, as well as Firewall events when you have enabled Intrusion or Blocking Log...
Page 25 - NAT Sessions; is shown FAIL and the rest is PASS, you ought to check your
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration NAT Sessions This section lists all current NAT sessions between interface of types external (WAN) and internal (LAN). Diagnostic It tests the connection to computer(s) which is connected to LAN ports and also the WAN Internet connect...
Page 26 - UPnP Portmap
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration UPnP Portmap The section lists all port-mapping established using UPnP (Universal Plug and Play). Please see the Advanced section of this manual for more details on UPnP and the router’s UPnP configuration options. 25
Page 27 - box to get the DNS automatically from your
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration ATA / Router Mode You have the option to configure the device to a pure Analog Telephone Adaptor (ATA); doing so, you will lose the access capability to other feature functions such as Firewall, QoS and etc. By default, the device is ...
Page 28 - For ATA device; Functions
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Analog Telephone Adaptor (ATA) vs. VoIP Router Functional Comparison Table Note: For ATA device management. When configuring to ATA mode, to be sure you renew your PC IP to be in the same subnet as your ATA. Fail to do renew your PC I...
Page 29 - Configuration
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Configuration When you click this item, you get following sub-items to configure your router. LAN, System, Firewall, VoIP, QoS, Virtual Server, Time Schedule and Advanced These functions are described below in the following sections. ...
Page 30 - Specify an IP address on this virtual interface.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration IP Alias This function supports to create multiple virtual IP interfaces on this router. It helps to connect two or more local networks to the ISP or remote node. In this case, an internal router is not required. IP Address: Specify a...
Page 31 - Active PC in LAN
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Ethernet Client Filter The Ethernet Client Filter supports up to 16 Ethernet network machines that helps you to manage your network control to accept traffic from specific authorized machines or can restrict unwanted machine(s) to acc...
Page 32 - to insert to
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address which connecting to the router. You can easily by checking the box next to the IP address to be blocked or allowed. Then, Add to insert to t...
Page 33 - It is case sensitive and must not excess 32 characters.; Scan
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Wireless (Wireless Router Only) Parameters WLAN Service: Default setting is set to Enable . If you do not have any wireless, both 802.11g and 802.11b, device in your network, select Disable. Mode: The default setting is 802.11b+g (Mix...
Page 34 - suitable level for your network.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration adjust this power level from minimum 0 up to maximum 255. Note: The Power Level maybe different in each access network user premises environment and choose the most suitable level for your network. Connected: Representing in true or f...
Page 35 - The key for
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Wireless Security (Wireless Router Only) You can disable or enable with WPA or WEP for protecting wireless network. The default mode of wireless security is disabled . WPA-PSK (TKIP) / WPA-PSK (AES) Pre-Shared Key WPA Algorithms: Ther...
Page 36 - WEP; Passphrase; Select the encryption key ID please refer to
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration WEP WEP Encryption: To prevent unauthorized wireless stations from accessing data transmitted over the network, the router offers highly secure data encryption, known as WEP. If you require high security for transmissions, there are t...
Page 38 - DHCP Server
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration DHCP Server You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or enable the router’s DHCP relay functions. The DHCP protocol allows your router to dynamically assign IP addresses to PCs on your network if...
Page 39 - Time Zone
VoIP/(802.11g) Broadband Firewall Router Chapter 4:Configuration System Here are items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management. Time Zone The router does not have a real time clock on board; instead, it uses the Simple Networ...
Page 40 - You may change other configuration options for; Device Management; options in the; section of the GUI.
VoIP/(802.11g) Broadband Firewall Router Chapter 4:Configuration Remote Access To temporarily permit remote administration of the router (i.e. from outside your LAN), select a time period the router will permit remote access for and click Enable. You may change other configuration options for the we...
Page 41 - Clicking on; Browse
VoIP/(802.11g) Broadband Firewall Router Chapter 4:Configuration Firmware Upgrade Your router’s “firmware” is the software that allows it to operate and provides all its functionality. Think of your router as a dedicated computer, and the firmware as the software it runs. Over time this software may...
Page 43 - Click; Restart; with option; Current Settings; to reboot your router (and restore your last saved
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Restart Router Click Restart with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to restart the router using the factory default settings (for example, after a firmware upgrade o...
Page 44 - User Management
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration User Management In order to prevent unauthorized access to your router’s configuration interface, it requires all users to login with a password. You can set up multiple user accounts, each with their own password. You are able to Edi...
Page 45 - Firewall and Access Control
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Firewall and Access Control Your router includes a full SPI (Stateful Packet Inspection) firewall for controlling Internet access from your LAN, as well as helping to prevent attacks from hackers. In addition to this, when using NAT, ...
Page 47 - for more
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Packet Filter This function is only available when the Firewall is enabled and one of these four security levels is chosen (All blocked, High, Medium and Low). The predefined port filter rules in the Packet Filter must modify accordin...
Page 48 - Example: Predefined Port Filters Rules; predefined rule is being preconfigured.; Table 1: Predefined Port Filter; Port Number; Start
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Example: Predefined Port Filters Rules The predefined port filter rules for High, Medium and Low security levels are listed. See Table 1. Note: Firewall – All Blocked/User-defined, you must define and create the port filter rules your...
Page 50 - Packet Filter – Add TCP/UDP Filter
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Packet Filter – Add TCP/UDP Filter Rule Name: Users-define description to identify this entry or click to select existing predefined rules. The maximum name length is 32 characters. Time Schedule: It is self-defined time period. You m...
Page 51 - Packet Filter – Add Raw IP Filter
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Packet Filter – Add Raw IP Filter Rule Name: Users-define description to identify this entry or click to select existing predefined rules. Time Schedule: It is self-defined time period. You may specify a time schedule for your priorit...
Page 53 - a filter on your own.; Click Delete; Delete; to delete the existing HTTP rule.; Click Add TCP/UDP Filter; Example; Always On
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Configuring Packet Filter: 1. Click Port Filters . You will then be presented with the predefined port filter rules screen (in this case for the low security level), shown below: Note: You may click Edit the predefined rule instead of...
Page 54 - The new port filter rule for HTTP is shown below:
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration 5. The new port filter rule for HTTP is shown below: 6. Configure your Virtual Server (“port forwarding”) settings so that incoming HTTP requests on port 80 will be forwarded to the PC running your web server: Note: For how to configu...
Page 55 - Intrusion Detection
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Intrusion Detection The router’s Intrusion Detection System (IDS) is used to detect hacker attacks and intrusion attempts from the Internet. If the IDS function of the firewall is enabled, inbound packets are filtered and blocked depe...
Page 56 - Table 2: Hacker attack types recognized by the IDS
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Table 2: Hacker attack types recognized by the IDS Intrusion Name Detect Parameter Blacklist Type of Block Duration Drop Packet Show Log Ascend Kill Ascend Kill data Src IP DoS Yes Yes WinNuke TCP Port 135, 137~139, Flag: URG Src IP D...
Page 57 - To enable or disable URL Filter feature.; Time Schedule
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration URL Filter URL (Uniform Resource Locator – e.g. an address in the form of http://www.abcde.com or http://www.example.com) filter rules allow you to prevent users on your network from accessing particular websites by their URL. There a...
Page 58 - Domain; Block surfing by IP address
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration dropped. 3. If the packet does not match either of the above two items, it is sent to the remote web server. 4. Please be note that the completed URL, “www” + domain name, shall be specified. For example to block traffic to www.google...
Page 59 - Instant Message Blocking; Peer to Peer Blocking:; Peer to Peer Blocking
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration IM / P2P Blocking IM, short for Instant Message, is required to use client program software that allows users to communicate, in exchanging text message, with other IM users in real time over the Internet. A P2P application, known as ...
Page 60 - Check the; Enable; box to activate the logs.; Status – Event Log
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Firewall Log Firewall Log display log information of any unexpected action with your firewall settings. Check the Enable box to activate the logs. Log information can be seen in the Status – Event Log after enabling. 59
Page 61 - VoIP Broadband Firewall Router; Here are items within the; and
VoIP Broadband Firewall Router Chapter 4: Configuration VoIP (Voice over Internet Protocol) VoIP enables telephone calls through existing Internet connection instead of going through the PSTN (Public Switched Telephone Network). It is not only cost-effective, especially for a long distance telephone...
Page 62 - Wizard; respective parameters below are automatically displayed.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Wizard This section provides easy setup for your VoIP service. Phone port 1 and 2 can be registered to different SIP Service Provider. Voice QoS DSCP Marking : Differentiated Services Code Point (DSCP), it is the first 6 bits in the T...
Page 63 - User defined profiles are limited to 8 only.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Setting for Phone Port 2 Click box of Same as Phone Port 1 to set phone port 2 be identical as phone port 1. Please refer to descriptions in “Setting for Phone Port 1”. User-defined Profiles NOTE: User defined profiles are limited to ...
Page 64 - To use VoIP SIP as VoIP call signaling protocol. Default is set to
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration General Settings This section reflects and contains basic settings for the VoIP module from selected provider in the Wizard section. Fail to provide correct information will halt making calls out to the Internet. SIP Device Parameters...
Page 66 - Click the; Edit; For more information about SIP responses codes, please check; Advanced – PSTN Environment Adjustment; ONHOOK means hung up.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Click the Edit to add or remove the responses code. To be sure the code is separated by a comma (,). For more information about SIP responses codes, please check to link to http://voip-info.org/wiki/view/sip+response+codes where you c...
Page 67 - to; Login Account Configuration; Same as Phone Number.; Authentication Password:; VoIP SIP registrar.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Phone Port This section displays status and allows you to edit the account information of your Phones. Click Edit to update your phone information. Login Account Configuration Phone Number: This parameter holds the registration ID of ...
Page 69 - PSTN Dial Plan; with; Dial without Prefix:; Dial at Timeout no Prefix:; without
VoIP Broadband Firewall Router PSTN Dial Plan This section enables you to configure “VoIP with PSTN switching” on your system. You can define a range of dial plans to make regular call from VoIP switching to PSTN line. Prefix numbers is essential key to make a distinguishing between VoIP and Regular...
Page 70 - PSTN Dial Plan Examples:; Dial with Prefix
VoIP Broadband Firewall Router Chapter 4: Configuration PSTN Dial Plan Examples: 1) Dial with Prefix If you dial 01223 707070, number 01223707070 will be dialed out via FXO to make a regular phone call. 2) Dial without Prefix If you dial 9102, the number 102 will only be dialed out via FXO port to m...
Page 72 - VoIP Dial Plan; Refer to Special Dial Code section in this Manual for more details.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration VoIP Dial Plan This section helps you to make a telephony number dialed as making a regular call via VoIP. You no longer need to memorize a long dial string of number for making a VoIP call. Parameters A listed of special dial feature...
Page 73 - Add; Prefix xxx is removed
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Dial Plan Rules List Click Add to create and define VoIP dial-plan rule(s). Prefix Processing: Prepend xxx unconditionally: xxx number is appended unconditionally to the front of the dialing number when making a call. Prefix can also ...
Page 74 - Intelligent Call Routing; VoIP User-defined Profiles; VoIP Wizard; Description
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration a traditional phone number (PSTN) to an Internet addresses/ SIP URL. The ENUM number must be registered via a public ENUM site or your VoIP Service Provider. <@ SIPgateway>: It is used for the Intelligent Call Routing feature wh...
Page 75 - International long distance calls. I set a dial rule,
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Localcheap.com is the default VoIP provider I set on phone port 1. When I call out any number start with 1 or 2 or 3 and plus rest of the phone number for local call, 03 is always prepended in front of these number. If 2 3295 are dial...
Page 77 - Apply; to apply the settings.
VoIP Broadband Firewall Router Chapter 4: Configuration Ring & Tone This section allows advanced user to change the existing or newly defined parameters for the various ring tones (dial tone, busy tone, answer tone and etc.) Country Specific Ring & Tone Region: Select a country ring-tone, fr...
Page 79 - Click Clear; You can click; Clear; to delete the existing Application.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration QoS (Quality of Service) QoS function helps you to control your network traffic for each application from LAN (Ethernet and/or Wireless) to WAN (Internet). It facilitates you to control the different quality and speed of through put f...
Page 80 - : The destination IP address or range of packets to be monitored.; DSCP Marking; Table 4: DSCP Mapping Table; Standard DSCP; Disabled
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Destination IP address Range : The destination IP address or range of packets to be monitored. DSCP Marking : Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte. DSCP Marking allows users to assign speci...
Page 83 - Example: QoS for your Network; Connection Diagram; Normal PCs; Information and Settings
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Example: QoS for your Network Connection Diagram Normal PCs VoIP Restricted PC Information and Settings Upstream: 928 kbps Downstream: 8 Mbps VoIP User : 192.168.1.1 Normal Users : 192.168.1.2~192.168.1.5 Restricted User: 192.168.1.10...
Page 84 - Mission-critical application
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Mission-critical application Mostly the VPN connection is mission-critical application for doing data exchange between head and branch office. The mission-critical application must be sent out smoothly without any dropping. Set priori...
Page 86 - configuration section of this manual for more information on NAT.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Virtual Server (“Port Forwarding”) In TCP/IP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be delivered to. Some ports have numbers that are pre-as...
Page 87 - Add Virtual Server; section
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Add Virtual Server Because NAT can act as a “natural” Internet firewall, your router protects your network from being accessed by outside users when using NAT, as all incoming connection attempts will point to your router unless you s...
Page 88 - click
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Example: If you like to remote accessing your Router through the Web/HTTP at all time, you would need to enable port number 80 (Web/HTTP) and map to Router’s IP Address. Then all incoming HTTP requests from you (Remote side) will be f...
Page 90 - Select the; button to apply your changes.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Edit One-to-One NAT (Network Address Translation) One-to-One NAT maps a specific private/local IP address to a global/public IP address. If you have multiple public/WAN IP addresses from you ISP, you are eligible for One-to-One NAT to...
Page 92 - Example: List of some well-known and registered port numbers.; Table 5: Well-known and registered Ports
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Example: List of some well-known and registered port numbers. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assignment of unique parameter values for Internet protocols. Port numbers range from 0 to...
Page 94 - Click Edit
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Configuration of Time Schedule Edit a Time Slot 1. Choose any Time Slot (ID 1 to ID 16) to edit, click Edit. Click Edit Note: Watch it carefully, the days you have selected will present in capital letter. Lower case letter shows the d...
Page 95 - Static Route, Dynamic DNS
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Advanced Configuration options within the Advanced section are for users who wish to take advantage of the more advanced features of the router. Users who do not understand the features should not attempt to reconfigure their router, ...
Page 96 - There are more than 5 DDNS services supported.
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration Dynamic DNS The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a static IP address to use a domain name. This is especially useful for hosting servers ...
Page 99 - SNMP Version: SNMPv2c and SNMPv3
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration After 100 seconds, the device will automatically logout User A. Universal Plug and Play (UPnP) UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with control and data transfer between devices. UPnP...
Page 101 - IGMP; Internet Group Management Protocol; Save Configuration to Flash
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration IGMP IGMP, known as Internet Group Management Protocol , is used to management hosts from multicast group. IGMP Forwarding: Accepting multicast packet. Default is set to Enable. IGMP Snooping: Allowing switched Ethernet to check and m...
Page 102 - Chapter 5: Troubleshooting; Problems starting up the router; Problem; Problem; Can’t ping any PCs on
VoIP/(802.11g) Broadband Firewall Router Chapter 5: Troubleshooting Chapter 5: Troubleshooting If the router is not functioning properly, first check this chapter for simple troubleshooting before contacting your service provider or Billion support. Problems starting up the router Problem Corrective...
Page 103 - Appendix A: Product Support and Contact Information; APPENDIX A: Product Support and Contact Information; Troubleshooting
VoIP/(802.11g) Broadband Firewall Router Appendix A: Product Support and Contact Information APPENDIX A: Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual . If you cannot resolve the problem with the Troubleshooting c...